Ubuntu Multimedia :: Xrandr Won't Let Increase Screen Resolution?
Jun 23, 2010
I have been arguing with my acer aspire one laptop since I bought it in terms of the screen resolution and have never been able to solve the problem, although I seem to be getting close. I just updated to 10.04 (the netbook remix).I have been following the instructions for how to fix it here. The result was this:
Code:
liz@Pippin:~$ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
[code]....
View 3 Replies
ADVERTISEMENT
Jan 12, 2010
I can't increase my screen resolution to higher than 800x600. In Windows I have a 1024x768 resolution. This is my xorg.conf file
Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]....
View 9 Replies
View Related
Jan 29, 2011
I am using a 15" CRT Samsung monitor and when I upgraded 10.10, the screen resolution became 800x600 and I am not able to increase the resolution of it. This was working fine with 10.04 version.
Below is the o/p for "xrandr":
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 0.0*
I also see a continuous message box at the top left corner of my monitor with text as "Unknown".
View 7 Replies
View Related
Aug 27, 2011
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
View 2 Replies
View Related
Sep 27, 2010
I have recently installed Ubuntu 10.04 beta version. After installation, my laptops screen resolution cant be increased to 1024x768. More over i cant see that 1024x768 option in the System>Prefrences>monitor option.
View 4 Replies
View Related
Apr 9, 2010
I recently installed 11.2 and am now trying to increase the maximum screen resolution.When I go to 'confifure desktop' > 'display' it will not let me increase the maxiumum screen resolution past 800X600.My nVidia 6150 LE drivers/kernal are installed, so I'm not sure quite what to do.
View 7 Replies
View Related
Jul 26, 2010
How can I increase the resolutions of my VGA Port?As you can see in the screenshot, the maximum resolution that Ubuntu 10.04 detect it's 1360x768 but in other OS I can use 1920x1080 for example.
View 4 Replies
View Related
May 24, 2011
I have an EeePC 1005HA with Intel 945G chipset and graphics. I've got a 21" no-name touchscreen attached to the laptop with the intention of hiding the laptop away behind it and simply using the tactile widescreen with virtual keyboard (onboard). By the way, the Touch screen is working great OOTB in Ub 11.04, although will have to tweak some more to get multi-touch working.On it's own the netbook runs 1024x600 (16:9) automatically. As soon as I plug in the larger monitor and mirror the images it auto-defaults both to 800x600 60hz and I have no options to select a higher res. I want to be able to run the large screen in something like 1024x600 or better, as long as its 16:9. At the moment everything is stretched out on the larger screen and on the netbook I have a 800x600 with black margins left & right.
Can't seem to work it out. The Monitor Config doesn't give me any higher options than 800x600 when mirrored. Below is the output of xrandr, if it's any help. Also my xorg.conf file is practically empty.
View 9 Replies
View Related
Oct 19, 2010
I have a centos 5.5 server, without a monitor connected to it.Sometime i need to connect to it with VNC, but maximum resolution is 800x600.How can i increase it at least 1024x748 ??I tried in system-config-display changing the monitor to a generic CRT 1024x768, and rebooted.But only allowed resolutions are 800x600 and 640x480.
View 6 Replies
View Related
Feb 25, 2010
I just installed Kubuntu on my computer running win xp. I have had problems with the resolution because it only lets me set it at 800x600. I have read many of the post here and most of them tell your to use xrandr or xorg config. When i run the xrandr iI end up with a message saying can't open display and also when i try the xorg confing. I installed kubuntu using wubi.
View 3 Replies
View Related
Oct 12, 2010
I was trying to add a new resolution mode to my monitor, but XrandR always fails. These are the steps I follow:
Quote:
$ gtf 1280 768 60
then I copy the result and type
Quote:
xrandr --newmode "1280x768_60.00" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
[Code]....
Finally I just can't create another resolution. And yes, my monitor should run in 1280x768.
View 9 Replies
View Related
Nov 21, 2010
I need to set the resolution of my display to 96 dpi.
The command that used to work was
$ xrandr --dpi 96
In Maverick, this gives me
[code]....
View 3 Replies
View Related
Sep 19, 2015
I've just completed my first pc build, and installed Ubuntu 8.2. My build was focussed around a legacy Apple Cinema 30" display, which has 2560x1600 @ 60fps resolution. The motherboard - Gigabyte H97N-Wifi - supports that display, although the display drivers are supplied by Intel, and are therefore nonfree. On startup, my display resolution defaults to 1200x800. This is what /var/log/Xorg.0.log says about it:
Code: Select all[snip]
[ 1.830] (II) intel(0): Output VGA1 has no monitor section
[ 1.881] (II) intel(0): Output HDMI1 has no monitor section
[ 1.882] (II) intel(0): Output HDMI2 has no monitor section
[ 1.882] (II) intel(0): Output HDMI3 has no monitor section
[ 1.933] (II) intel(0): EDID for output VGA1
[ 1.986] (II) intel(0): EDID for output HDMI1
[ 1.986] (II) intel(0): Manufacturer: APP Model: 9232 Serial#: 33555281
[code]...
I bumped into a webpage which stated that xrandr does not work with proprietary drivers, and if that's true, I can't get it to change resolution on my screen.
View 2 Replies
View Related
Jan 1, 2011
GNOME decided not to use the correct resolution ever. In Ubuntu, it got it automatically and that said it should be 1366x768, and when i run this:
Code:
xrandr -s 1366x768
I get
Code:
Size 1366x768 not found in available modes
So then I tried to run xrandr and find out what was available and I got:
Code:
$ xrandr
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected
[code]....
So when I try to change it to 1024x768, I get the same "not found in available modes" message.
View 9 Replies
View Related
May 5, 2010
I am running Fedora 12 on a T400 Thinkpad. When connector my external monitor prior to powering on the computer or if I restart it, I get a lot of resolution choices from xrandr. See below.
Code:
$ xrandr
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 303mm x 190mm
1440x900 60.0*+ 50.0
1024x768 60.0
[Code].....
Is there some daemon I need to restart to detect the monitor resolutions correctly, or is there a module I can reload?
There seem to several variables to reproducing the behavior. If I restart without the laptop without the monitor plugged in, log in, and then, plug the monitor in with the monitor powered on prior to plugging, all resolutions are detected properly. However, if I plug the monitor in with it powered off, then power it on, I only get the few options shown in above. Once I get the reduced number of options, it seems to stay that way till I restart regardless of how I unplug the monitor.
I have found a work-around by just forcing the modes with xrandr --newmode and xrandr --addmode, but I would much rather have the modes autodetected.
View 1 Replies
View Related
Aug 25, 2010
I am trying to find the maximum supported resolution of my video card by using xrandr. My card is an NVidia GeForce Go 7300 (in a laptop). The official documentation does not list specific resolutions that are supported. My laptop display is detected as "AUO" in the NVidia X Server Settings dialog (Ubuntu 10.04 amd64) and has a native resolution of 1280x800. However, I would like to know what is the maximum resolution that I could use on a display with the VGA adapter irrespective of whether the laptop's display is on. This is what I get from xrandr: Screen 0: minimum 512 x 384, current 1280 x 800, maximum 2304 x 864 default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0* 51.0 56.0 52.0
1024x768 52.0 50.0
[code]....
I am guessing the maximum width of 2304 would be for using TwinView with the laptop's 1280-width display next to a 1024 CRT or similar. Surely these cannot be the only supported resolutions. I would like to use a LCD display of width somewhere around 1600 pixels (in particular while turning off the laptop's screen so as to use the external LCD as the primary display) if possible.
View 5 Replies
View Related
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Oct 14, 2010
is it possible to increase the resolution on gtk themes to get rid of visible pixels? Or is there a set limit?
View 1 Replies
View Related
Jan 9, 2011
I have an AMD Radeon HD 6950 and I know that no driver will be released for a while that works (current one causes xorg to crash and creates a reboot loop). Until then I have a 1920x1080 monitor running at 1280x1024 bc there are no higher settings.Is there any way to increase the resolution until the driver support comes? I tried a method involving xandr but that didnt work.
View 5 Replies
View Related
Apr 2, 2010
I'm having problems adjusting my screen resolution. I'm using Nvidia Geforce FX5300 video card and Samsung T220P LCD screen with resolution of 1920x1200. After installing the Nvidia driver I went to system -> preferences -> display in order to change the resolution to 1920x1200. Unfortunately, the available resolutions were only 640x480 and 320x240. I tried to set the resolution manually, using the advanced button, but when I did this everything was extremely big on my screen.
View 1 Replies
View Related
Dec 16, 2010
I have my Xubuntu box connected to a 1920x1200 LCD monitor via a KVM switch. If the KVM is set to the Xubuntu box when I boot, all's well, but if the KVM is set to the other machine, Xubuntu boots into a 800x600 resolution. This behavior started with Maverick, when I was running Lucid. the correct resolution was set no matter the position of the KVM switch. Is there some place in Maverick that I need to set the resolution to 1920x1200 so it is set correctly regardless of the KVM?
View 1 Replies
View Related
Jul 31, 2011
I know this is probably a stupid question , but I started using Ubuntu 11.04 .
My screen resolution on windows was 1600x900
But on ubuntu (even after installing proprietary drivers) the highest I can get is 1024x768 .
I tried using xandr but couldn't work it out .
My xandr info
When i tried adding a new mode using the command
I got the following error
Now I'm not sure what VGA refers to , but Im using a vga port to connect my monitor
Also I'm using only one monitor.
View 9 Replies
View Related
Apr 13, 2010
Ive just installed Fedora 12, max resolution option is 800*600 can someone advise how i can adjust or improve the resolution to at least 1200*700?Hardware: HP D330m, 2.8GHZ, 700MB RAM, VGA is a Intel Extreme Graphics Display.
View 6 Replies
View Related
Aug 5, 2010
I was wanting to use StartUp-Manager to increase the resolution of the GRUB menu and the boot logo screen. Changing the resolution for the GRUB menu works fine. But the Ubuntu logo that should show up during the boot process is all scrambled across the screen. I tried multiple resolutions to fix it and none of them work. How do I restore everything back to their defaults? I tried putting the numbers all back to where they where when I first ran StartUp-Manager but that didn't fix it.
View 4 Replies
View Related
Apr 7, 2010
Does anyone know where to manually set screen resolution in the new 10.4 beta? Used to be in xorg.conf, but it appears that it doesn't exist in this release.
View 2 Replies
View Related
Apr 21, 2010
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
View 2 Replies
View Related
Apr 29, 2010
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
View 9 Replies
View Related
May 21, 2010
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies
View Related
Jan 5, 2011
I have tried EVERY solution that has been posted. the nVidia forumswon help. Every solution that involves editing the .conf file crash my system. I wanna have real resolution for my monitor not be stuck at this 800x600 bull$#!tnVidia Graphics CardPlanar PL1700 Monitor
View 1 Replies
View Related
Mar 5, 2011
I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.
View 4 Replies
View Related
