Ubuntu Multimedia :: Graphics Card Not Recognized - Monitor Native Resolution Not Available
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
ADVERTISEMENT
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Jan 2, 2010
I've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.
My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course
View 5 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
Jun 15, 2010
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
View 6 Replies
View Related
Apr 13, 2011
I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.
View 2 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Feb 4, 2011
Just tried and failed miserably to get an Nvidia 6200 based graphics card to play nice with my machine.After putting my ATI Radeon 9200 back in the box, my emulators have gone all kinds of strange.
ZSNES will crash as soon as I attempt to load a game full screen and will leave the screen resolution at the resolution ZSNES was running in (800 x 600, for example.GENS again will alter the screen resolution to whatever it was running in when the emulator is minimised. I'm running 10.10 with 1gb Ram, 128mb ATI Radeon card, P4 3ghz. Was all fine until I tried the new card and I did a fresh install only last week .
View 2 Replies
View Related
May 17, 2010
I can't set up the native resolution for the LED monitor of a Dell Inspiron 1564 laptop with openSUSE 11.2.YaST2 lists correct the graphics adapter as: "Intel Arrandale Integrated Graphics Controller" and the monitor having the resolution: 1366x768 However in /etc/X11/xorg.conf lists only modes with a 1024x768 resolution, which are not really "sharp" on the monitor Besides that it lists the Device as "Vesa-BIOS Graphics". Starting sax2 does not provide me with any option to change these settings (at least not in the graphics mode).
View 3 Replies
View Related
Mar 2, 2010
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
View 2 Replies
View Related
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Sep 1, 2011
Canadian hi-fi manufacturer Bryston is shipping a Music Player, which is in effect a pared down Linux box running some media player. The good thing is that it plays the files at their native resolution16bit/ 44. 1KHz for ripped CDs, 24/96 and 24/192 for hirez downloads, as well as other intermediate values.Does anyone happen to know which player they are using?
View 1 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Mar 3, 2011
I have a Mini-ITX VIA EPIA LT series motherboard running Slackware 13.1
Graphics card is not recognized properly.
But the graphics is OK the first half of the boot, then it turns weird and stays that way.
The screen is very dark, tux in the upperhand left corner is colored wrong. (Red, Purple, Green)
I did a Xorg -configure, and this is the content of xorg.conf.new:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 14 Replies
View Related
Feb 3, 2016
How to enable native screen resolution in X using VESA driver? I have IBM/Lenovo ThinkPad T61 with a native screen resolution of 1680x1050, but I am getting 1024x768 instead.
This is a fresh install of Debian 8.3 (latest stable) (Jessie).
The root cause of this is that nouveau graphics driver (which I was using before) was causing me kernel crashes. Full story here: [URL] .....
View 7 Replies
View Related
Feb 6, 2010
I'm running WoW in Ubuntu 9.10 with wine. My screen's native resolution is 1920x1200. When I play WoW in Windows I set it to 1920x1080 in fullscreen because that aspect ratio allows me to see more of the playing field. In windows it doesn't stretch the screen so I have a black bar at the top and bottom of my screen.
When I set it to 1920x1080 under wine, it stretches my screen. Is there any way I can make it not stretch?
I tried searching forums/google but I couldn't find anything related to my question.
View 1 Replies
View Related
Jan 5, 2010
I have three monitors. Two are hooked up to an ATI card and the third to an nVidia 6800 card. This third monitor is not being recognized. I tried installing nVidia's official Linux drivers but received an error that no compatible device is present. Going into System > Preferences > Display shows only my first two monitors. I'm running Ubuntu 9.10 x64.
View 1 Replies
View Related
Jan 4, 2011
the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time.
The exact message is:
The current settings cannot be applied. Possible issues may include:
- Display(s) cannot be enabled.
- Setting(s) cannot be applied due to insufficient video memory.
So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question:
First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. UPDATE: I got my active adapter in the mail today (it's DisplayPort to DVI) and so far things seem to be better. I can run my third screen, drag things seamlessly between them, and I am also running compiz. The adapter I'm using is a "B087B-005B" made by "Accell", UPC is "826388106239".
There's still a couple "annoyances" that need worked out though: The left most screen is always the primary monitor. Which means the "gnome bar" (is that what you call the applications-places-system menu?) is always on the left most screen. It also means that new dialogue boxes always opened centred on the left screen, which is counter intuitive. Especially if you're using a program like GIMP and the text editor or color picker pops up on the left. Does anyone know of a way to change it so that new windows always pop up on the center screen?
View 3 Replies
View Related
Sep 15, 2010
I've been trying a bunch of different solutions to getthis fixed. Let me give you the details: I'm currently on Ubuntu 10.04 Lucid Lynx. I have a Geforce FX 5200 graphics card and I have the nvidia proprietary drivers installed (version 96, I tried 173 as well but there's doesn't seem to be a difference).
My monitors native resolution is 1680x1050 but since my graphics card cannot handle that resolution I use 1280x1024. I've had this resolution working before on Ubuntu as well as Windows with the same graphics card. My problem is that in nvidia-control, the list of resolutions does not include 1280x1024, and the closest to that is 1280x900 which is not supported by my monitor. So the only tolerable resolution I can get is 1024x768.. if you've used this resolution then you know that it is not tolerable for long. So I tried to force the resolution by using xorg.conf.. Here it is:
[Code]...
For some reason this isn't forcing 1280x1024.. I'm still in 1024x768 and it still doesn't list it in nvidia-control.. What's weird is that on the previous release (Jaunty or Hardy) this xorg.conf worked fined and got me my 1280x1024.
View 4 Replies
View Related
Apr 5, 2011
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies
View Related
Dec 22, 2010
i have a fairly outmoded system:
mb gigabyte ga--m57sli-s4
cpu athlon 3800
memory corsair ddr2 xms 2gb
graphics nvidia gforce 8500gt
hdd western digital 400gb sata
monitor hp lcd hp1740
the screen plays up sometimes. it gets a yellow line down one side. it's the office type 4:3 aspect monitor which seem to be getting rarer. if i switch to a widescreen 16:9 format, would i need a new graphics card?
i don't play games. but sometimes there'll be stuttering when i'm watching a videos video. whether this is the screen or something else i don't know.
View 2 Replies
View Related
Feb 3, 2010
i don't know what this os want from me one moment everything is fine the next it's not first of all it started asking me to choose resolution on startup it said undefined b31 and i have to press enter then 366 for 1024x1280 32 bit how can i fix this problem how can i define 366 resoultion as default and how can i update the screen card driver for 10.1 i have ati hd 3650 agp card. and by the way what are the cool things i can do with graphics here except the rottaing windows.
View 1 Replies
View Related
Apr 26, 2010
I'm using an Intel Q45 graphic card, VGA and HDMI. I have two monitors and both work with Win7, splitting nicely. However in Suse it doesn't find the second monitor, the one on the HDMI port. However Suse does find that there is a HDMI port it could use. It's just not set up to have a screen attached to it.Xinerama won't work. I tried it despite the fact that it shouldn't I have tried numerous xorg.conf setting according to a number of sites that were very helpful and very thorough. I tried to modify their advice but it simply didn't work out for me.It seems like the screen is simply not acknowledged within the system for some reason. I'm running OpenSUSE 11.2 with KDE4.4, factory and my other systems pick up the screen without a hitch. My home system did the same with a HDMI connection so if anyone can point me in the right direction or even better
View 6 Replies
View Related
Nov 22, 2009
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
View 14 Replies
View Related
May 20, 2010
I'm planning my next desktop build (currently only have a laptop that is falling apart), and one of the features I'm really looking forward to is multiple monitors. I'm thinking a 1920x1200 center monitor and two 1600x1200 on either side, but I'm not decided just yet. I don't know if I really need that resolution.
I have a few specific questions though. The only time I've ever messed with multiple monitors is way back when I had Windows, so I'm not sure what to expect on Ubuntu.
1: What is the best Graphics card brand/series to use? I've seen that ATI has more powerful hardware than nVidia for the same price range, but nVidia seems to support Linux better. I'm using an ATI card in my laptop now and have never had any problems with it (with either open source or proprietary drives, other than open source drivers didn't do well with 3d). I would also like these GPUs to be running F@H while I'm away, so GFLOPS is just important as gaming performance.
2: Since I want to use 3 monitors, I assume I should get 3 of the same graphics card or a card with 3 identical outputs (do those exist?).
Or can this be done some other way. For example, a more powerful card for the center monitor, and less powerful cards for the other two. Do those need to be the same brand, or could I use, for example, ATI and nVidia cards on the same desktop simultaneously?
3: Is it possible to have a virtual console on one monitor with a desktop on the other two, or do I need to set up a terminal on the desktop to use that monitor?
4: How can I run fullscreen SDL games with multiple monitors? Will it only show on one screen or stretch across them all? Is it possible to have a fullscreen game running on one monitor with the desktop visible on the others? How would the mouse focus work with that? Or does it just all depend on how I setup the monitors?
View 2 Replies
View Related
Jan 5, 2011
What graphics card will support (without too much fiddling) three 24" displays? I just got rid of my mac and am now going to get a linux desktop. I am not sure what distro yet, probably fedora although I am thinking about arch. I have some experience in linux, although nearly none when it comes to hardware configurations. I have two 24" BenQ monitors (DVI and HDMI inputs) and will buy a third 24" display with the pc.
Now I have been looking at some forums about triple monitor setups, but they are almost all about troubleshooting existing hardware compatibility issues. I guess I am at an advantage since I haven't bough any hardware yet, so here is my question. What graphics card would you buy to support 3 24" displays together (meaning that I want to be able to drag windows from one display to the next). I was looking at the ATI HD 5770 and some mention of the eyefinity stuff.
View 7 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
Feb 4, 2011
openSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250
Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.
Can I make the blank VGA options permanent?
View 5 Replies
View Related
Apr 9, 2010
I've no idea what the heck is going on with my TV capture card, i went to the other posts about my Hauppauge Inc. HDPVR-1250 model 1196 but it all didn't work i have the ubuntu-restricted extras installed but mythtv is not picking up the card. i'm running ubuntu karmic.
View 9 Replies
View Related
