Ubuntu Multimedia :: Natty NarWhal Netbook Has Destroyed Asus 1215T's Sound
May 4, 2011
My sound worked fine for the first few days.. then I noticed the mic wasn't working in skype so I tried messing with it in sound preferences. Now my speakers explode with this horrible distorted noise(semi-recognizable as whatever I'm trying to play) and sometimes freezes when I try to play any sound. Reinstalling just the drivers to avoid a fresh install, according to the stickied thread at the top, did nothing. Attempting to place the settings back to their defaults also does not appease this bloodthirsty beast.
I've been on a rampage through every lead I've found on trying to fix this problem but nothings worked so far.. it seems the problem is that the onboard speakers (Internal Audio; Analog Surround 4.0 Output) hates it's life in an Ubuntu OS too much to continue living. Not sure if the RS880 Audio Device [Radeon HD 4200] output is with it either.
Also heres my.. file report thingy(alsa-info.sh): [URL]
The laptop in question: [URL]
View 2 Replies
ADVERTISEMENT
Jan 7, 2011
I just installed Maverick on an Asus Seashell 1215T netbook with an AMD/ATI chipset. The sound output is working fine (with the exception that I have to manually set output to either speakers or headphones rather than just plugging in headphones), but neither the internal microphone nor external microphones plugged in through the mic jack work. I do have the sound device set to the internal sound (rather than HDMI) and the volume level set appropriately. Apparently neither microphone is being recognized. Any ideas on what could be wrong?Here is the relevant section from lspci -v:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 841c
Flags: bus master, slow devsel, latency 64, IRQ 16
[code]....
View 9 Replies
View Related
Feb 22, 2011
i ordered an AsuS Eee PC 1215T netbook off of Newegg:[URL].. i was confused and surprised to discover it didn't have an operating system, only the Express Gate Cloud. it was advertised as running on windows 7, but it's not installed. i called the ASUS tech support not once, but TWICE and they didn't know diddly squat. would anyone be able to walk me through how to install linux on it? the express cloud is a very basis system. there isn't a "my computer" function so i don't know how i would go about installing anything on it. from what i understand this little netbook has great potential, i just don't know how to harness it.
View 5 Replies
View Related
May 28, 2011
my logitech quickcam zoom works out of the box for taking local pics and local videoshots. It's seen by Cheese, camorama, However, it doesn't work on aMSN, nor on any video-enabled website. lsusb tells me: Bus 004 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Is there someone around who has got their logitech quickcam zoom to work and is willing to share his/her knowledge?
View 4 Replies
View Related
Aug 30, 2010
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
View 1 Replies
View Related
May 17, 2011
I've just upgraded from 10.10 to 11.04 and sorted out the mess that came along, now there's just one thing left and I'm all set. I have always used Emulate3Buttons and had it working on 10.10 earlier as well but now I can't seem to get it going.
I've edited my xorg.conf like this:
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSection
Nothing happens if I write "yes" or "no" (or true/false).
View 5 Replies
View Related
Apr 25, 2011
i heard about that Ubuntu now finally releasing it's new version of Ubuntu distribution. It will launch on 28 april.. how to use this version on ubuntu 10.10 is there any possible strategy to switch on Ubuntu 11.04 Natty Narwhal
View 11 Replies
View Related
Dec 23, 2010
I've been running Ubuntu on my laptop for a while, and I recently upgraded from 10.04 in Ubuntu using System -> Admin -> Update manager. However, when I now run System -> About Ubuntu, I'm told I'm running Natty Narwhal 11.04, rather than Ubuntu 10.10 which I was aiming for. I never noticed this earlier, though... I guess it's a month or two since I upgraded.Did something go wrong in the update and cause this to happen by mistake?I there a way for me to downgrade to 10.10?
View 1 Replies
View Related
Apr 19, 2011
This may sound like a silly question, but I can't seem to find the answer. How can I go about making Gnome the default desktop session in Natty?
View 1 Replies
View Related
May 9, 2011
I thought before breaking my working PC, i thought id better ask the question.Is it possible to download a GDM log in theme and get it running on Natty? I've googled loads of possibilities, but got a feeling that as Natty is GDM2 it can't be done.I've downloaded Tweak and been able to change the log in wallpaper and the icon, but i want one of those fancy log in screens that ive seen on Gnome eyecandy.
View 1 Replies
View Related
May 20, 2011
how to install pess 2011 on natty narwhal.?
View 1 Replies
View Related
Jun 1, 2011
I have Ubuntu 11.04 Natty and when I started it the first time it wasn't connected to the Internet. I refreshed and did the basic stuff. But it wasn't so simple. I went to Network Tools and Natty didn't recognize my router. I am not connected through Ethernet either. I can't do/can't afford to do an ethernet hookup. I don't want to spend my time running a cable to the floor below my CPU. Anyway, I have a Broadcom 4306 Network Controller. I am currently using my Windows to post. Also, I can't get drivers from Synaptic or anything (that includes NDISwrapper). Can I use Windows drivers without downloading NDISwrapper? I'm so confused and starting to think this is hopeless. Even worse: I don't have a disk for installing Ubuntu, I downloaded online alongside Windows with Wubi, Again, my network controller is a Broadcom 4306.
View 9 Replies
View Related
Jun 4, 2011
How do I enable wireless in Natty Narwhal? When I type in "lshw" it tells me: *-network=DISABLEDHow do I enable wireless? I'm going crazy trying to figure it out!Also, My Ubuntu has absolutely no Internet. Not even an Ethernet connection. I'm using my Windows for my Internet right now.
View 9 Replies
View Related
May 1, 2011
When I try to start Geany, it crashes with a segmentation fault. The current version is 0.20. I've tried to downgrade it to 0.19, but it didn't solve the thing.
View 2 Replies
View Related
Dec 27, 2010
I would just like to inquire how some members have versions of ubuntu 11.04.I am actually posting from England,but as far as I was aware this version is not available until april of 2011.Is the source code maybe available through certain channels.Or do you guys get distros a few months before us here.Because according to my vers 10.10,I have the latest upgrade.
View 2 Replies
View Related
Apr 30, 2010
I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?
View 9 Replies
View Related
Jan 14, 2011
A couple months ago, I created a dual boot between Windows 7 and Ubuntu 10.04 using wubi. I then upgraded to 10.10. What would usually happen is I would start up my laptop and it'll go to the Windows boot manager, letting me choose between Windows 7 and Ubuntu. If I would choose Ubuntu, it would go to a GRUB boot manager. It would let me choose between several different ways to boot Ubuntu, mainly that there were different options that were all the same except they had different numbers in the name, i.e. Ubuntu, whatever, 14.33.22.19.25 or something like that.
A couple weeks ago, I updated to 11.04. At first it worked good, but then a couple days later I updated a bunch of packages. It tried to CAT a GRUB file and failed. It gave me an error code, but I ignored it. Yesterday, I updated again, but since last time failed, it told me to do a partial upgrade. This I did, and it was successful. But now, everytime I go to GRUB and try to select any of the options, it tells me "Error: File not Found" and I cannot boot into Ubuntu. There are recovery versions for each choice, and using these I can boot into Ubuntu in low graphics mode and I can also get to a command line prompt.
View 6 Replies
View Related
Apr 1, 2011
I installed Natty Narwhal yesterday and everything was fine.Today, however, I installed some updates.I tried restarting my computer but it never gets to the desktop.It keeps crashing and looping back, if that makes sense.I can't start in fail-safe graphics mode either.
View 5 Replies
View Related
Apr 11, 2011
in the grub menu once I select windows and press enter the screen goes dark and then it takes me back to the grub menu again.
both ubuntu 11.04 and win xp are installed on the same harddisk
Code:
setparams 'windows (on /dev/sda1)'
insmod part_msdos
insmod ntfs
set root = '(/dev/sda_msdos1)'
search --no-floppy --fsuuid --set=root XXXXXXXXXXXX
drivemap -s (hd0) ${root}
chainloader +1
View 9 Replies
View Related
May 1, 2011
I just upgraded to Natty Narwhal. When I first logged in a pop-up dialogue appeared saying that my computer did not fulfil the hardware requirements to run Unity. That cannot be possible this is the output of the lscpu command:
Code:
Architecture: i686
CPU op-mode(s): 32-bit
CPU(s): 2
Thread(s) per core: 2
Core(s) per socket: 1
CPU socket(s): 1
Vendor ID: GenuineIntel
CPU family: 15
Model: 3
Stepping: 4
CPU MHz: 2999.900
L1d cache: 16K
L2 cache: 1024K
This is is the output of the free command:
Code:
total used free shared buffers cached
Mem: 1251612 916332 335280 0 74220 383576
-/+ buffers/cache: 458536 793076
Swap: 860156 0 860156
Summarized that is:
Pentium 4 3GHz core running two threads
1.2GB of ram
View 2 Replies
View Related
May 6, 2011
im using Natty right now,did an upgrade from my install of maverick...Since ive upgraded to natty, my mouse pointer seems to not like some links or some buttons like "OK" or "Cancel" or anything , like a page has 100 links , randomly say link at number 54 and number 2 wont be "clickable"..Here's the link to video : http:[url]....Ive tried removing my old mouse and using a new one ,same problems..
View 5 Replies
View Related
May 8, 2011
I recently upgraded from Maverick Meerkat to (classic) Natty Narwhal Ubuntu Linux. I am running on a Toshiba Satellite A665 (Intel i7). I use a wireless internet connection. Under Maverick, I had no issues. Under the update, I am finding that occasionally things stop working: The indicator Applet looks fine, but from a terminal, I find that I am no longer able to ping my own router (less than 10 feet away.) This behavior occurs after working fine for a few hours. I am unsure if anything in particular triggers it (I will report back if I determine a particular cause). I have a few other computers (2 running Windows, and the other Maverick Meerkat) -- and they are unaffected. Turning wireless off and on resolves the issue for me on Natty. Rebooting also works. Here's some hopefully relevant technical details about my system:
Code:
~$ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]...
View 9 Replies
View Related
May 10, 2011
I have installed ubuntu 11.04 on my HCL Me Laptop. The OS is not getting halted when I use the shut down or the restart menu from the GUI. It is not shutting down when used the commands 'sudo shut down now' or 'sudo poweroff now' or 'sudo halt now' or 'sudo init 0' also. Except when used the 'shut down' command, the command line hangs at:
init: plymouth-upstart-bridge main process (1981) terminated with status 1
checking for running unattended upgrades.
When used the 'shut down' command, the violet screen where the word ' ubuntu ' is written appears and hangs. I have updated my OS yesterday, but it is not fixing the problem. All the time I am using power button to have a forced shutdown. I loved the natty nerwhal.
View 8 Replies
View Related
May 10, 2011
I am having some trouble using the compiz config settings on the new "Natty Narwhal" 11.04. On 10.4, it worked seamlessly; the 3D desktop cube worked, 3D windows worked, and rotating desktop cube also worked. On Natty Narwhal, nothing works-- at all. It may seem kind of childish for me to download compiz config just for the cube, but the fact that compiz config alone isn't even working is kind of making me nervous. Though, it would be great if someone could help me with the cube.
View 2 Replies
View Related
Jul 25, 2011
I have a Broadcom BCM4318 that isn't working with the B43 or the other (I tried installing both and while they supposedly installed successfully, neither shows up in the Additional Drivers tab for me to enable.) I tried using both sets of directions stickied up at the top of this forum. Neither seems to be working for me (no guarantees on whether I did it right) though the B43 is apparently the one I need.Disclaimer: I'm a total newbie to using command line and a new convert from Windows so I'm rusty at navigating and making things work, though things are finally starting to make a little sense after two days of hacking at it.
View 5 Replies
View Related
Apr 6, 2011
I think from upgrading to Ubuntu 11.04 Natty Narwhal. Whenever programs ask me to send reports (bug reports) they fail to redirect me to the proper launch pad bug report page. It just loads up my home page and acts like it's finished. Even if I have Firefox previously open, nothing happens.
Liferea was doing the same thing until I changed it from using the Gnome Default to Firefox. Perhaps this is a gnome default failure or something?
View 3 Replies
View Related
Apr 17, 2011
I'm running Ubuntu 10.10 Maverick Meerkat and I'd like to know when does the update manager upgrade the system to Ubuntu 11.04 Natty Narwhal. I do not want it to do the upgrade too early,as this might cause problems.I heard they're going to release Natty by the end of April,when it passes the beta stage but it will take 3-4 months for the bugs to be fixed. Also,please answer my other thread,it has new posts: [URL]
View 2 Replies
View Related
Apr 25, 2011
I was going to install the Beta for Ubuntu 11.04 using the command update-manager -d. Everything went fine accept the fact that I had maybe two other programs running the same time as the update wich made my computer performance get really high wich ended in overheating and that my computer (using a laptop, of course) shut off. When I started my laptop again it will not go any further than the Ubuntu start screen saying something like "The device / cannot be found or is not ready yet". Can I all my files although I haven't done any backup?
View 6 Replies
View Related
May 27, 2011
i have lenovo g450 and has installed windows 7 ultimate for a long time ago. i want to try ubuntu natty in my lenovo with dual boot system. after loading natty disk and click on install ubuntu it said that this computer currently has no detected operating system and i have to choose erase disk and install ubuntu or something else. i have created drive c with 50 gb for dual boot.
View 9 Replies
View Related
Jun 21, 2011
I'm currently trying to setup a static IP address for my computer, but everytime I set the static IP my network does not works.
My lspci -v shows the follow.
Code:
Ethernet controller 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device 7529
[Code].....
Even after restart the system my network only works when I use dhpc to resolve my IP Address.
View 6 Replies
View Related
