Ubuntu Multimedia :: Cannot Start Gui (no Screens Found) / Terminal "dual Screen"

Dec 7, 2010

I've experienced 3 1/2 years of Ubuntu bliss. I have run into the first issue that I cannot solve using these forums, and I'm at my wit's end. Problem: I cannot start gdm (gnome?). I get the "Fatal server error: no screens found" error. Also, my terminal screen is duplicated on the top and bottom of the laptop monitor, indicating something gone terribly wrong.

When the problem started: immediately after running standard update to 2.6.32-26 (this time). Last time, it happened after running a standard update, but that was weeks ago. I did a complete reinstall (three times, including once to 10.1)

My system:
Ubuntu 10.04.1 LTS (clean install + recent updates)
Kernel version 2.6.32-26
Also have 2.6.32-25. Neither one works in recovery mode, either.
Machine: Dell Inspiron 1420
Intel Core2 Duo
Nvidia GeForce 8400M GS

View 9 Replies


ADVERTISEMENT

Ubuntu :: X Wont Start After Dual Screen - No Screens Found

Dec 31, 2010

After installing a second screen and trying dual screens, i never backedup the x11 xorg.config file and recklessy overwrote my settings through that nvidia panel... Now to find that x wont start :(EE) no devices detected Fatal server error: No screens found

how i'd be able to share my xorg.config file with you guys, I am using my ipod now... Anyone knows anything? I tried reconfiguring and didn't work.. How do i share my file so you guys can find the flaw? Or how do i find the flaw myself?

View 5 Replies View Related

Ubuntu :: No Screens Found When Trying To Start X Server / Get That?

Oct 14, 2010

Running Ubuntu 10.10 x64, fully updated kernel and stuff, in VMWare Workstation 7.

Before I tried installing the Nvidia driver, I set up all my stuff, settings, etc. Restarted several times, everything went okay.

I then decided to install the Nvidia drivers for my GTS 250. I first tried the manual install (sudo sh NVIDIA-INSTALL-NAME.run) and it failed saying something about the nvidia.ko or nvidia.so. I tried using this page http://ubuntuforums.org/showthread.php?p=9203671 to fix it, but it still failed, so then I used the automatic method (sudo apt-get install nvidia-current) and it installed fine, then I ran nvidia-xconfig and restarted.

The VM started up, but no GUI came up, instead, a black screen with a terminal (I think it's called a Virtual Terminal) came up and asked me to log in. I tried the command "startx" from there, and it told me no screens were found.

What can I try?

View 2 Replies View Related

Ubuntu :: Dual Screen - Gnome Panel On Both Screens?

Jan 28, 2010

I reinstalled and forgot how I added a panel to my second screen, cause when you add a panel you choose left right top or bottom, but no option for second screen... finally I added a new panel, then right click on the new panel> properties, then unchecked "expand" then was able to move the new panel to second monitor, then set to whatever side and recheck "expand" then it sticks to the second screen, then add to panel, and select window list, then all new windows will be shown on the appropriate panel/screen

View 4 Replies View Related

Red Hat :: Script To Run Dual Screens If The Port Of The Screen Displayed

Sep 23, 2010

Red Hat Enterprise Linux 5.5 I want to script to run dual screens if the port of the screen displayed in

View 2 Replies View Related

Ubuntu Multimedia :: Fatal Error: No Screens Found?

Feb 15, 2011

I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.

I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.

View 1 Replies View Related

Debian Multimedia :: Startx - No Screens Found

Nov 19, 2015

I tried to install NVIDIA drivers to my asus computer . When I rebooted startx did not launch.

These are the commands and source i used to install nvidia driver

Code: Select alldeb http://http.debian.net/debian/ jessie main contrib non-free
apt-get update
apt-get install nvidia-glx nvidia-kernel-dkms nvidia-xconfig nvidia-settings
nvidia-xconfig
shutdown -r now

Here is my log

Here is my lspci | grep -i vga

Here is my xorg.conf file

View 2 Replies View Related

Ubuntu Multimedia :: Fatal Server Error No Screens Found 9.10

Jan 9, 2010

I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.

Resolved the issue of the display, now on to the grub menu.

View 3 Replies View Related

Ubuntu Multimedia :: Can Xrandr Supports Dual Screens

Dec 30, 2010

how Xrandr supports Dual screens. I am attempting to setup Dual Screens on a Ubuntu 10.10 System with an ATI twin head card (DVI + HDMI) Non-mirrored, separate desktops However on connecting a device to the HDMI output - the DVI screen output appears to loose all panels, icons. Only the mouse pointer & desktop background remains.

I believe the output is defaulting from screen 0 to screen 1. I found a solution by creating two devices in xorg.conf and assigning one for each separate screen. BUT this created a new problem of loosing my mouse pointer. how I can get my mouse pointer working or the correct way to setup dual screens.

[URL]

View 9 Replies View Related

OpenSUSE Multimedia :: Dual Monitor - Blank Screens On Both

Nov 25, 2009

with KDE everything works fine (both monitor show their configured displays correctly), however oddly with gnome when i try and setup dual monitor display, i get blank screens on both monitors, however on the display 0 on the left side there is a full column single pixel width green strip. the rest of display 0 and 1 are blank, however my mouse will move around both display correctly.

View 1 Replies View Related

Debian Multimedia :: 7.8 Startx - No Screens Found > Wlan0 Doesn't Exist

Apr 17, 2015

Installed Debian 7.8 KDE next to Windows 8.1.

Installed perfect perfect (except for network part). Grub came up, I selected Linux. After start up I typed

Code: Select allstartx

And I get the

Code: Select allFatal server error: no screens found

Also when I run

Code: Select allsudo iwconfig all I get is
Code: Select alllo        no wireless extensions

eth0            no wireless extensions

Running lspci I get (vga for startx problem and network for WiFi problem)

Code: Select allVGA compatible controller: Intel Corporation  ValleyView SSA-CUnit (rev 0e)
Code: Select allNetwork controller: Atheros Comm. AR9485 Wireless network adapter (rev 01)

View 6 Replies View Related

Debian Multimedia :: Can't Configure X-Server - Errors "device Not Found" And "no Screens Found"

Apr 15, 2011

I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".

I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything

View 8 Replies View Related

Ubuntu :: Get Start Up To Go The Desktop Screen And Not Terminal?

Mar 2, 2011

Although I have been using Ubuntu for a while, I am still a beginner.This is the second time that it has happened to me and I am unable to find a possible solution in my books on Linux and Ubuntu.Twice I have downloaded updates from Update Manager which required a reboot. Each time I have rebooted,terminal window has opened. I am unable to get out of terminal to the desktop or to enter any other program ( like office,etc). I know that the graphics are still in place as The Ubuntu 10.10 screen flashes on before the terminal black screen appears.(I am in runlevel 2 )A. How can I get out of terminal and onto desktop?

View 3 Replies View Related

Ubuntu :: Error: No Screens Found

May 9, 2010

I'm trying to install 10.04, but have hit a few bumps. The first time I tried to boot the live cd, the monitor frequency would go out of range. I fixed this by deleting the

Code:
ro quiet splash
from the end of the boot line, and replacing it with
Code:
ro vga=773 nomodeset

After booting with this modification to the kernel line, rather than booting into the live cd desktop, it takes me to a command setting. To try and get things moving I type

[Code]...

View 5 Replies View Related

Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"

Oct 28, 2010

I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.

The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:

1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??

View 9 Replies View Related

Ubuntu :: Gparted Error - No Screens Found

Oct 10, 2010

I downloaded the new gparted (6.4.1 I think) and when I try to run it from a live cd in the default settings it keeps telling me that it can't find my screens. I have an intel video card. I haven't had this problem with older versions of gparted. I suppose I could use an older version, but I'd like to know what the problem is.

View 2 Replies View Related

Ubuntu :: Nvidia 'No Screens Found' After Every Reboot?

Nov 7, 2010

Some background to summarise, I have installed 10.10 clean over the top of 10.04. I did not have X/display problems on 10.04. After installing the Nvidia display driver for my device (Asus 8800GT - display driver: NVIDIA-Linux-x86_64-260.19.12.run) in order to get dual-headed display working under TwinView (as I had previously have used on 10.04 problem-free) I cannot reboot/shutdown my machine without a Fatal Error No Screens Found message appearing at boot time.I can hibernate, but this is less than ideal, especially after installing updates which require a restart. Every time this does happen I can re-run the driver installation and all is well again.Below are two copies of my Xorg log. The first is the erroneous log, the second the successful log. Below that is my xorg config file generated via nvidia-xconfig.

ERRONEOUS XORG LOG FILE
[ 29.712]
X.Org X Server 1.9.0

[code]...

View 9 Replies View Related

Ubuntu :: Fatal: No Manageable Screens Found On Display :0.0

May 31, 2010

husam@ubuntu:~$ compiz setting manager compiz (core) - Error: Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager. compiz (core) - Fatal: No manageable screens found on display :0.0

Launching fallback window manager Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1e000b4 (Mozilla Fi)Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. Now, if i close terminal, window's will be bugged .

View 3 Replies View Related

Ubuntu :: Huge - Startx Does Not Work - No Screens Found

Oct 18, 2010

I was trying to install the nvidia drivers then when I reboot all I get is a command line. Startx does not work, it says no screens found. I was dumb and uninstalled the nvidia drivers too not realizing my internet didn't work in the command line. I need to install the drivers from the live cd unless there is another way. I don't want to have to reinstall!

View 9 Replies View Related

Ubuntu :: Compiz - No Manageable Screens Found On Display

Nov 18, 2010

It is no longer running my default when I log in it did go screwy yesterday I reinstalled my nvidia driver and it started allowing to to activate it. This is what it was saying:
Code:
compiz (core) - Fatal: No valid GL extensions string found.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

View 9 Replies View Related

Ubuntu :: Fatal Server Error: No Screens Found

Mar 22, 2011

Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?

View 9 Replies View Related

Ubuntu :: Virtual Box VM And Dual Screens?

Jul 18, 2010

I use multiple screens on my computer in work which is running Ubuntu 10.04 it runs great apart from the VBox VM. I run a windows VM as some apps we use in the office are not compatible with ubuntu and I can't get them running right in wine. In single screen mode I use the VM in 'seamless' mode so the windows start menu just sits on top of the ubuntu panel and I can flip from ubuntu to windows as I please in the same interface (im sure anyone that uses VBox will understand what I mean).

The problem comes when I use a second screen. If I try to run in seamless mode on the main screen it works ok apart from the fact that the windows start menu sits behind the ubuntu panel instead of on top of it. When I move the VM to the second screen I cannot run it in seamless mode at all, if I try the resolution goes hay wire and I only get half the screen (if im lucky). So I just run it in full screen mode which stops me from dragging windows from within the windows VM back to the first screen.

What I want to be able to accomplish is to run the VM in seamless mode on either screen but be able to drag windows accross both screens. Is that at all possible?

View 2 Replies View Related

Ubuntu Multimedia :: Web Camera Not Found At Start Up?

Mar 9, 2011

having a problem getting my web camera recognised at start up. when i boot my machine and run , cheese or skype no camera , if i unplug it and plug it back in it works fine . Till i shut down and boot up again .

View 1 Replies View Related

Debian Multimedia :: Output DFP2 Not Found Warning On Terminal

Feb 23, 2016

Every time I open my terminal a warning message shows up. The warning is the following:

Code: Select allwarning: output DFP2 not found; ignoring

There is no output DFP2 in my system. I ran xrarndr and the outputs are the following:

Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
   1920x1080     60.00*+
   1680x1050     59.95 
   1600x900      59.98 
   1280x1024     75.02    60.02 

[Code] ......   

HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm

   1920x1080     60.00*+  50.00    59.94 
   1680x1050     59.88 
   1600x900      59.98 
   1280x1024     75.02    60.02 

[Code] ....

HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)

View 2 Replies View Related

Fedora Installation :: GUI Does Not Load With StartX - No Screens Found

Mar 4, 2009

Just downloaded f10 last night. Install goes fine, but when I boot it goes to root command line. I enter in startx and recieve and error.

(EE)Unable to locate/open config file
(EE)open /dev/fb0: no such file or directory
(EE)No devices detected

Fatal Server Error:
no screens found
xinit: no such file or directory (errno 2): unable to connect to X server
xinit: no such process (errno 3): server error

View 4 Replies View Related

OpenSUSE Install :: 11.1 With KDE 3.5 - Screens Found But No Usable Configuration

Dec 27, 2009

I previously used 11.1 with KDE 3.5. Since I have /home on a separate partition I decided to install 11.2 from scratch to avoid any conflicts with KDE 4 installing. No problems on first reboot and some updates were installed. Now at each boot I'm dropped into text login. If I try <startx> I get <no screens found> and /var/log/Xorg.0.log gives <screens found but none have usable configuration>. However if I add vga=952 at the boot screen (for a 1280x800 laptop) I get into graphical login and everything works well (yes even KDE 4). Below is an snip from /etc/X11/xorg.conf.

Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 305 230
HorizSync 30-52
Identifier "Monitor[0]"
ModelName "1280X800@60HZ"
Option "DPMS"
Option "PreferredMode" "1280x800"
VendorName "--> LCD"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection .....

View 4 Replies View Related

Ubuntu :: Xorg Messed Up - Fatal Server Error (No Screens Found)

Apr 23, 2010

My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.

View 9 Replies View Related

Ubuntu :: Dual Monitors - Cursor Gets Stuck Between X Screens

Aug 5, 2010

I have dual monitors that I have set up with two separate X screens with the nVidia control panel. For some reason at times when I move my mouse between the two screens, the cursor will start flickering rapidly between the adjacent edges of the screens and the system will become completely unresponsive, forcing me to do a hard reboot (the keyboard doesn't have a SysRq key).

View 6 Replies View Related

Debian Configuration :: No Screens Found (EE) After Installing Nvidia Drivers

Jan 19, 2015

I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...

Here you have my output...

X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck

[Code] .....

View 7 Replies View Related

Fedora :: Fatal Server Error: No Screens Found Giving Up?

Jul 9, 2010

I installed fedora 10 on my laptop. But I am getting this error when it is booting up:

Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0

[code]....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved