Ubuntu :: Mounting An ACOMDATA External Hard Drive
Jan 2, 2010
I'm using Ubuntu 9.04, and I can't seem to get my ACOMDATA external hard drive to work. It is plugged into the PC using a USB cable, and it is read as a removable storage device on both Win. XP and Win. 7. On Ubuntu, it is read for a split-second, then disappears. All of my USB ports are functioning perfectly. Are there any commands to mount this device?
I'm trying to get ubuntu 9.04 to recognize a Maxtor One Touch III USB external hard drive. This drive has been formatted and used on a Windows XP. I cleared everything off but am trying to see if I can arrange it so that I can back up from linux and access (if need be) from a Windows machine.
Here is what I get with fdisk -l:
/dev/sda1 * 1 14219 114214086 83 Linux /dev/sda2 14220 14593 3004155 5 Extended /dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
I have attached a 1.5 TB external hard drive to my new Ubuntu server. I mount it in /media/external. I used sudo mount /dev/sdx# /media/external but sdx# keeps changing. I added a line to fstab to mount it permanently but after couple of our it unmounts itself and /media/external is empty. It is in vfat format but webmin shows it as ntfs.
Quote: cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5).
My external hard drive (about 2 years old) won't mount. It wouldn't mount on Windows either. Other external hard drives (sdb1) mount perfectly.
I am wondering is there a Linux way of getting the hard drive to work again? The disc spins up so it's not a mechanical failure. I'm guessing here but is there a way of flashing firmware onto the external HD if that might be the problem?
(Seagate 2TB ST320005EXD101-RK)
Code: Select all# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda2 during installation
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have a HDD from a CCTV system that I suspect to be Linux based. I cannot see it in Ubuntu. I can see the partitions in the Disk Utility. All it says is Partition type: Unknown(0xd4). I need to access this CCTV footage.
I have a Seagate Freedesk external drive. I formatted it to ext3 (as per several posts regarding this)However I cannot mount the drive. If I go "places" "computer" I can see the drive (simply entitled USB Drive) but if I try to open it it says "cannot mount the drive". If I right click and select "Mount Volume" I get Nothing. How can I get this to auto mount like other usb drives? I am using Hardy on a Compaq Laptop.
I have been trying to use fstab, writing a script in /etc/init.d to mount my external ntfs usb drive. I have had absolutely no luck and I have tried just about every solution I could find on the web except for writing a udev rule which I have never done so I am not exactly sure how.
My solution for the interim is to put the mount command in the rc.local file. That works, but I don't understand why I can use fstab to mount it. Putting it in the fstab gives me errors like "unknown file system" or just "An error occurred during mounting of drive" and then the booting stops. I tried using both ntfs and ntfs-3g.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
My brother has an external hard drive that has some personal data on it that he doesn't want to lose. He was reinstalling windows on his machine and deleted both the partition on his internal drive and on his external drive. He installed windows on his internal drive only though. I want to be able to reaccess that data from the drive. All the data should still be on the drive since so write cycles have been done to overwrite it.
I guess deleting the partition removed the partition table or something so the drive doesnt mount. I would prefer to use linux (but windows is ok too) and a free as in beer tool preferably. there are normal recovery tools (I have used get data back before) that scan for any files anywhere that has been overwritten but I don't really need things that have been overwritten; just the data that is still there but not availible because it cant be mounted.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
I added a second internal hard drive to my system.It took a while to figure out how to mount it, and I thought all my problems were over.I want to use this for storage for Transmission since this would keep all the files independent of my other hard drive.One thing that I noticed is that when I restart my computer it doesn't automatically mount the drive (Transmission gives me an error message saying it's not able to access the drive).So I remounted it, and noticed that it restarts all my torrents.One thing that I noticed is that Transmission keeps the .torrent files in /tmp and IIRC there is an option to move them wherever you want to in Deluge (I don't know if this will help anything or not).I don't like Deluge, but if it's somehow easier.
So how can I retain my settings prior to restarting and make this permanent?I do like to turn my computer off from time to time, and I am quad booting with other distros that I like testing out.
I purchased a new hard drive, plugged it in, formated it, edited fstab to auto mount it, and though it is mounting the drive, it won't allow me write privileges. I can read the drive, but I need root access to write to it. The drive giving me the issue is sdd1. The others, I have no problems with. I can read and write to those without a hitch.
Running 10.10 64bit Kernel 2.6.35-23 I am noticing what I think is a big hiccup in my boot process my drive is mounting at around the 4sec mark then my system pauses for roughly 13 seconds, you can even it see it on the screen a blinking cursor comes up the entire time. Then during the rest of the boot my drive will re-mount at least 4 more times. Then during use of my system there will be random re-mounts throughout the use. Here is the mounting message
I just noticed the pausing recently after an update but have been seeing this re-mounting since install. Are these normal? They dont seem like it to me, and if they are normal why such a long time on the initial mount and every re-mount takes 4-5 seconds. Let me know if I can provide any further info as well.
I have installed Musix distro on my brand new amd 64 dual core computer but for some reason it is not showing in the media folder. Been a while since i mounted a slave and plain ubuntu seems to do it automatically so i forgot what commands i need to see it. Would love some help as the Musix forum is messed up. They have most of their forum in spanish and the parts that are english are not complete. I managed to sign up but that damn thing is really messed up. I signed up as over 18 but it sends you a form to have signed as under 18. Made 2 different users and still the same problem.
I just installed a new clean copy of Ubuntu 11.04 onto a Dell XPS M1710 laptop. I believe it has a generic Texas Instruments Firewire controller. Plugging in a standard Firewire disk does nothing. If I boot with the device and run �dmesg|grep firewire�, I get:
[ 1.327138] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.388103] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.888144] firewire_core: created device fw0: GUID 354fc0001a369961, S400
How can I install the necessary modules to make this work?
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
I have an 320GB hard drive with F11 installed. Lately, I got a 1.5TB new hard drive, on which I have installed F12. Now I want to use the 320GB as a second hard drive since I have lots of data on it. My question here is as I boot my desktop, how does it recognize to boot from the 1.5TB and consider the 320GB as a secondary? Is there anything I need to setup in BIOS? My motherboard has one extra SATA connection left for a second hard drive.
I am having issues mounting my non-OS hard drive (/dev/sda).I had the following information in my /etc/fstab file:/dev/sda /mnt/storage auto defaults 0 0This worked as expected; however, I decided the modify this so I can have it automounted to my home directory (/home/jesse/storage)./dev/sda /home/jesse/storage auto defaults 0 0This /mnt/storage remains intact even after rebooting the system.