Ubuntu :: Mount A HFS+ Partition In Ubuntu As Read / Write?
Jan 6, 2011
I saw a lot of people asking this question on the net and most (if not all) answers points out to disabling journaling on that partition, which is not always a good idea.
So here is 1-2-3 style how to mount HFS+ partition in Ubuntu, so that you are able to write on it:
I need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
How do i disable the linux file cache on a xfs partition (both read an write).
We have a xfs partition over a hardware RAID that stores our RAW HD Video. Most of the shoots are 50-300gb each so the linux cache has a hit-rate of 0.001%.
I have tryed the sync option but it still fills up the cache when copinging the files. ( about 30x over per shoot :P )
sudden of all all USB drives and sticks I put into a PC will not mount with read/write permissions (they did before). I can still copy to them, but only when I am root. I am on Maverick I've noticed though that if I run disk utility, then UNMOUNT the partition, Check File System, Mount the partition back, I get read/write access..
I am running Karmic x64 on a HP laptop that has a cd/dvd burner. I have a r/w cd with files on it and I wish to add/remove files to it. After it mounts automatically on insertion, I unmount it and remount with: sudo mount /dev/sr0 -t iso9660 -w /media/cdrom (I tried assorted other hare-brained things also) but it always says that the filesystem is read only. Do I need to use a different device than sr0? Is it even possible under Ubuntu?
We have a network with several computer. We have two file servers (don't ask why) an Ubuntu and an XP as well as many clients. Setting shares on Ubuntu was easy and all clients can see them read and write. but I can't get the Ubuntu clients to see the SMB shares on the XP properly. This is my fstab:
I don't want to have to download the kernel source and uncomment out CONFIG_UFS_FS_WRITE=yes and build a custom kernel ever time I update the kernel. Is there a better way? Like when Ubuntu.deb repositories claim a stable kernel is there an auto config script when installing from synaptic -or- aptitude? Like any way to add this one config opt to .deb kernel W/O building custom one from source?
I used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
On opening nautilus,it shows the XP ad Fedora partitions.Clicking on them mounts the partition.However,XP partitions are mounted in Read/write mode,whereas Fedora partition is mounted only in Read mode.What changes should i need to make in /etc/fstab to enable Read/Write access to Fedora partition as well?
I have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).
If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.
Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?
After installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
I'm having difficulty making my FAT32 drive capable of read/write. I followed the instructions here (http://ubuntuguide.org/wiki/Ubuntu:Maverick#Windows_Compatibility) and added the following line to my /etc/fstab file:
Code: /dev/sda4 /media/WinD vfat quiet,defaults,rw 0 0 However, when I rebooted the drive is still read-only
I'm trying to configure a per user samba login for full access to the user's home directory.Mounting the shared directory works flawless when mounting from Windows. I can read, write, create without problems. However, when mounting from Linux the shared space is readonly.
I have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
I have a Windows 2003 server with fiber attached volumes (NTFS) that I would like to mount readonly on a linux system to back it up to tape. The fiber device will allow me to present the volume R/W to one host and R/O to another, however, the R/O system doesn't see any of the changes made by the R/W server. In other words, how can I make a readonly volume refresh, scan for changes, or update without un/re-mounting it?
Is the "mount -o --bind" option what I want? From the MAN is doesn't seem right... the option "sync" seems slightly more promising but I think I'm just grasping at straws here. The best I have come up with is a cron job to unmount then mount the volume periodically.
I want to simply mount an ext4 file-system onto a normal mount point in Ubuntu (/media/whereever), as read-writable for the current logged-in user, i.e. me.
I don't want to add anything into /etc/fstab, I just want to do it now, manually. I need super-user privileges to mount a device, but then only root can read-write that mount. I've tried various of the mount options, added it into fstab, but with no luck.
Anybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?