I have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 22.214.171.124-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD cpu family : 16 model : 10 model name : AMD Phenom(tm) II X6 1100T Processor stepping : 0
Assume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
I have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I've a program that launches new processes, and wait for them to die before it exits. So, for example, my program is a process, and it launches 3 more processes, and when the 3 child processes end, it will exit.
As you see, at end of the example, the program used a total number of 4 processes.
1 - Now, I'm running this program in a CPU with 4 cores. This means that the program used each core for each process?
I have a dual-core computer that I just upgraded to lucid lynx. when looking at the system monitor, one of the cpu's is always running at 100% and its not always the same one. Is this normal or do I have an issue? I would really like some info.
I want to generate core dump files from my program when it crashes. Its a pretty big process and has about 10-11 threads in it.I have followed the documentation to enable core dump by setting ulimit to unlimited etc. I quickly tried "A demo program creating a core dump" from the following webpage, which succeeds in Segfault and dumping a core file in the directory that I configured.However, I tried running my original program and caused it to crash. I did this by making calls to kill(), raise() or the same null pointer access as shown in the webpage above. In each case, my program crashed but did not generate a core dump file. Am I missing something?My program is in C++ and my environment is Redhat 9.0 (kernel 2.4.20)
Going through the "Why do I NOT get a core dump?" section on the same webpage as above, I can see two potential problems. One - there are issues with the suid/sgid (bullet # 6). I am not able to change any settings with suid because my system does not contain either /proc/sys/fs/suid_dumpable or /proc/sys/kernel/suid_dumpableTwo, my program has threads in it and the bullet # 8 is the problem.
We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")
With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.
With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.
However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.
Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.
Some errors that appear on 32-core nodes:
ib_query_port failed (-16) for mlx4_0 ib_query_port failed (-16) for mlx4_0 mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16) mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
Interested to find out if this is normal or not. I am running a Intel Core 2 Duo processor and the system monitor keeps showing one of the cores at 100%, and the other fluxuating normally. Is this normal or a bug with the system monitor. I am running Compiz, but that is pennies to the comp. It seems that about every 1.5 minutes the cores "swap" the 100% usage, but it always ends up with one core at 100% and the other core doing normal stuff.
my laptop fan was blazing like crazy for a while with only firefox and pidgin open. and even after closing firefox, it still continued. i took a look in htop, and appears that python is sucking 100% of 1 of the two cores all the time. it occasionally swaps core, but it always keeps 1 core completely occupied. i'm currently on lucid x64.
I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
I just installed Windows 7 Ultimate on my computer and I want to install Fedora Core 11 and dual boot my system. I have been on the net looking around, but I can't seem to find any suggestions on how I would do this. Can someone help me or give me a URL(s) that will give me a step-by-step guide on how to install Fedora Core 11 on a Windows 7 computer?
I have the latest everything (kernel, nvidia drivers and kde) and there seems to be a problem in that if I click on the K menu, or grouped windows in the taskbar, or anything in the notification area which causes the computer to freeze for 7 - 12 seconds. Anyone have any ideas what could be causing this?
It's an AMD 64 dual core with a GeForce 210 pci-x graphics card. The issue happens either with out without compositing.
I downloaded the x86 server version for Lucid twice today. Both times before burn the md5 match those published on the Ubuntu site. I am attempting to install the system on a Dell poweredge 2500. 2x 1.4 gb P4 procs, 1 gb ram, 750 GB HDD (raid) Boot to installer. it goes through the standard language checks, keyboard, checks for cdrom, then attempts to start copying files.
It gets to 17% copy on fs-core-modules-126.96.36.199-generic-di and hangs there for 5 minutes or so. Then comes back with the error that it could not get the file and asks if I want to retry. all retries lead back to this error. As I said, MD5 is exact, burner does not complain of a bad burn, and disk is closed at the end of the burn. so, has anyone else been able to install Lucid server x86? burned four disks today, one pair on two different burners. All fail at 17% retrieving that file.
I have fresh install of Ubuntu 10.04 LTS Added Wine from Software Center but have no any Win apps loaded or running yet. I have also enabled visual Effects and the system installed and enabled NVidia's driver for the video-card after which the picture quality improved. Here is the screen of my CPU monitor (sorry labels arre in Russian but the charts are quite intuitive) As you can see this 100% load "jumps" from one core to another periodically. On the Processes tab there is nothing fancy:
Less than 10% processes load. I have tried to play with CPU Clock Gnome widget, it doesn't really change the picture whether I use MAX CPU clock of 2Ghz or reduced power-saving 1,2 GHz. I have found couple similar cases on forum but see no solution so far.BTW, I have already launched the update manager and currently Ubuntu does not offer any new updates.
PS. In the attachement - Report of some built in System Diag Tool
Now this is a fresh install of Ubuntu 10.04. I have done nothing but follow the steps on installing flash and ati driver from the main site. I have this problem on my desktop too which also has ATI graphics but with a AMD cpu. The desktop was upgraded from Ubuntu 9.10 and the driver installed from ATI site like my laptop. This is really troubling because while the video is in full screen its using over 90% of my cpu?? Then my laptop gets really hot so I just switch back to Windows 7(which only uses 15%). Last time I had this problem was with the FGLRX proprietary drivers on Ubuntu 9.10 with the desktop.
Ubuntu 10.04 Intel Core 2 Duo 2.1GHz 4GB ATI HD 4650 1GB
I have installed Ubuntu10.04.1LTS in my Desktop amd64 computer. I also downloaded the same version for i386 processors and tried to install the OS for my HCL Pentium Dual Core T4300 @2.1Ghz 4GB RAM laptop, details of which are given in the following two screenshots: dscf0105.jpg and dscf0106.jpg I already have Debian Lenny 5.0.4 installed on the laptop dscf0104.jpg and the laptop works fine when I run the Debian OS or Knoppix liveCD image stored in the HDD of the laptop. We all know that the Ubuntu LTS live CD leads to the following option: Screenshot.jpg However, in my laptop the operation freezes before we can reach the above option. The screenshot explains the situation: dscf0107.jpg I know I could always use one of the alternate downloads and install the OS from it. But my point of contention is: where is the matter going wrong? Can't we use the graphical installer CD to do a CUI installation?
I installed Fedora 15 on my relatively new Laptop machine and stumbled upon an odd thing:Even though my CPU is an Intel i7-640M dual core (2x 2.8 Ghz) it somehow seems to be recognized as a quad. System monitor shows 4 CPUs (all of the used to some extend) and even "cat /proc/cpuinfo" gives me 4 processors:
processor: 0 vendor_id: GenuineIntel cpu family: 6
At the same time the system (while relatively stable) is incredibly slow when it comes to complicated calculations (I do neuron simulations on a custom C++ framework).
Compiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.
I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).
I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.
I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?