Ubuntu :: Lost GUI After Running Grub / Get It Back?
Feb 5, 2011
Login in problems:
I was trying to fix the brightness on my toshiba T130 Satellite laptop and found these instruction [Note: I did not try XRANDR option]
If backlight control doesn't work with the 'XRANDR' option above, use this code...
Safe the file, run 'sudo update-grub' and reboot.
However after running these instructions and rebooting my laptop I lost the GUI, and do not know how to get it back.
If it helps the loader screen with the 4 dots has gone slightly skewed, and I've downloaded the most recent update changes.
I can get GUI through recovery mode and running it in failsafex, but I don't think this is a good solution.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
Alright so I lost a sd card that I had uploaded to my comp before it crashed but I wiped the card before I lost it and I want back what was on it..I have ran testdisk and photorec and it has only brought me back 5 or so pics, but when I search the card in deleted files through either program it lets me see the file names, and when I try to save it the computer doesn't read the jpeg file when I go to open the recovered file.
I am happy with ubuntu it's cool, but I want to go back to windows. I lost my windows cd. So I made a blank disc with an iso file. But the problem is. When I try to keep it inside my computer and restart it won't load. I think grub has something to do with this.
I have a harddisk which is partiotioned in C & D. I've installed WIN XP on C and WIN 7 on D. Then I installed Ubuntu 10.04 on D beside WIN 7. Now I can't access to WIN 7 and also to drive D in XIN XP and in Ubuntu. What can I do to get back WIN 7 and drive D ?
I'm using Windows 7 and Ubuntu in two differents partitions in my hard drive. I was on Windows 7 and decided to reboot. When the grub screen should have appeared, instead the computer rebooted itself. It continues to do so. I put Ubuntu 10.10 Live CD and it keeps "loading" forever, but doesn't hang. In the console, it said something like "input/output" error. I tried with my Win 7 DVD and it was the same: it doesn't reach the part where it shows the menu with all the installation options.
I tried with Gparted and it loaded fine. It showed all my partitions, but there wasn't (I think) more that I could have done with it. I tried then user Super Grub Boot. I finally could enter Ubuntu. Everything is fine except that it doesn't show my Window partition. It's like it doesn't exist anymore, so I can't backup my files. Now, I haven't tried loading Win 7 from Super Grub Boot (I'm going to do it just as soon as I post this), but this is pretty weird. Anyone have any idea what is going on and what can I do to this this?
I had everything backed up so it is no great disaster, but drop box lost a lot of my files. Some of the folders with missing files now have thumbs.db in them, but when you go to the dropbox site, you don't even see that.
I had thought about using dropbox as my main backup solution. That would be a big mistake.
I installed Ubuntu 11.04 on a usb stick and have been running it from there. I was messing around with the "Login Screen" utility and changed the session choice to "User defined session" (or something similar). I thought this would allow me to pick the session to use (Unity, Gnome) but that was wrong. So right now, when I login, I have a blank screen with no menu bars. If someone could give me the commandline command to run the "Login Screen", I should be able to switch it back.
I was running a patch of my wifi connection and now i have NO wifi at all. I am totally lost right now. i have been running throught all the threads but nothing is really working. Is there a way do a full system restore (like windows) that will undo all my mistakes? my wifi has always worked until i screwed something up!
I am running ubuntu 9.1 on a Dell Dimension 2400. After installing ubuntu on the pc, it was automatically recognizing my router and connecting to the internet fine via ethernet. Then, my roommate unplugged the router and it won't recognize it. I can't access my router settings, and ubuntu is recognizing it as "inactive" but every other computer in the apartment runs fine. My PC uses a broadcom ethernet controller, and my router is a Linksys wireless N.
So I am working on a clients PC, and after I saved their data on an external hard drive I left it plugged in while I reinstalled Windows for them.....I HATE Windows. Stupid OS doesnt know any better than to just go deleting everything. Ubuntu would have known better than to delete multiple hard drives like that.
Anyway, please tell me I can salvage this data for my client? It was probably just reformatted. The data should still be there right?
I upgraded my netbook (HP Mini 5101) from 9.10 to 10.04 yesterday. Everthing (including bluetooth) seemed to work, as it did before. Today I tried to install a 2.6.35 kernel from maverick backports (the kernel ppa), but it didn't work for me and I removed it again. Now my bluetooth is gone (bluetooth applet does not show any devices) but wireless still works.
I already tried to remove and reinstall the driver package via apt-get (sudo apt-get un/install bcmwl-kernel-source bcmwl-modaliases) but nothing helped. code...
I have a problem I don't know how to solve. Today I bought a netbook and while waiting for the new Ubuntu Unity release to come out, I thought of trying out Crunchbang instead of Windows that came with it. Browsing on my Ubuntu desktop machine, I found a guide for making Crunchbang live USB stick, and i followed the procedure. However, I made a very stupid mistake. The guide said I should enter the command: sudo dd if=/path/to/iso/crunchbang-10-alpha-01-openbox-i686.iso of=/dev/sdX bs=4M;sync
where "of=...." part should be replaced with the name of the HDD. I forgot that I have an external HDD mounted and mistakenly copied the data to it. After this, I cannot see the content of my external HDD anymore. Instead, i have this 620mb large Crunchbang-install device.
I know what I did was stupid, but is there a way to get the content of my HDD back? I have some valuable data on it.
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I was trying to free some memory as my /var was about to fill.I went to Add /remove software and ried to remove some of the unwanted software and it asked for dependency and i clicked ok.After a while i saw some of my aplication like Evolution,Empathy blackening and i killed the Uninstallation. I was sure by time that something wrong has happened and i did not switch off my monitor so that i can retain my application.I tried lot to increase teh /var so that i can update my yum and install some lost application but allin vain i tried Gparted which can only decrease the size . I had 40 GB unallocated space so i tried to boot from Live Fedora 12 DVD and was able to see my all the files and filesystem. All my data in /home was intact.I tried to go to grub and went to boot hte kernel and Initrd and was able to go to #root but again was not able to update the system as network was missing.The SYSTEM was Not booting and stuck in between. Tried to change the /var to var1 copied /var content to /var1 and made changes in teh /etc/fstab still did not work ,so finally went to repair with Live cd but could not get "Linux rescue" anywhere not even to upgrade option so finally installed the New linux without touching / and /home partition rest were deleted and formatted for new instalation.Now i could not see my data in /home directory although i could see data in /root(old) and all ..i am now lost ..my data is nowhere ..please help me.I can only see /home(old) but it says empty and shows 6 GB unused and 3.3 GB used when seen in Gparted .
I shut down my laptop this morning and headed to the office and fired it back up to find that I no longer had the use of any of my usb ports! messages are saying that the ports have been disabled. curious if an update broke something? the ports have been working fine, I use a usb mouse instead of the touchpad most of the time.
I've just had a phone call from an 8.04/win xp duel boot user who has lost the boot entry to xp after a 8.04 update. I guessed at a system upgrade but she checked and is still on Hardy. They write and only have the xp for printing as there is no Linux support for the cannon printer. Using the printer is important. I've said I'll pop round and try to sort it out. Any ideas how I can do this. Update grub in recovery mode maybe or if I need the command line what should I try? I'd like to know before calling as though I'm not quite a novice this isn't a problem I've had to cope with since grub 2 beta ( didn't solve it then either an am still using 9.04 ). Hacking legacy will be new to me. As this is a writers machine with all her work on it I'd regard it as a critical pc, don't want to mess things up for her.
I ran the compiz --replace command and I was playing about with Compiz. I wanted to active that rotating desktop cube. The screen froze when I activated it and I ended up doing a hard reboot by pressing and holding the power button.
Now, when I log in, the gnome bar at the top has gone, the window 'decorations' have gone (no minimize, etc) and the new gnome launcher on the left of the screen has gone
Any advice on how to get thing back to the way they were?
I tried a program called BarPanel, which replaces the Gnome Panels. The installation instructions told me to download the program installer (the program installs automatically for Debian/Ubuntu users). Then I had to go to System > Preferences > Sessions to remove the gnome-panel entry and add the BarPanel one. So far so good. On re-starting, the new panels were installed to my desk top in bright green! The problem was that a lot of the icons don't work. The action menu does nothing and there is no entry for Sessions in the System menu, so I can't go back and undo. I have re-installed gnome-panel under Synaptic, without any success. I un-installed BarPanel, so I now don't have any panels at all now! One good thing is that I have Cairo-dock on my desktop, so I have access to several programs, including the terminal.
Can someone out there give me the command line instructions to get the gnome panels back.
I was trying to rip a couple of video dvd titles.I stopped to install transcode.Then when I started I had forgotten to take out my Suse 11.1 disk, I realised after I had already cancelled, that was the reason the programme was asking me to insert the video DVD.Anyway to cut a long story short, I had a mad 5 minutes clicking and have lost part of the screen.I have closed k3b and reopened it, but I can't get the panes back.I have lost the bar at the very top the left hand pane and the top right hand pane.
Google brought me no love on this one, tried searching here with little luck as well. So I'm hoping somebody vastly more experienced than I can shed some light on my plight.
The situation: I have a CentOS 5.3 x64 server running the latest cPanel which works fantastic. I issued a graceful reboot and the server came back up (according to the DC) just fine to a login prompt. Apparently the system lost all of its IP address configuration. Primary IP, secondary IP's gateway, you name it and it was gone. Now my secondary IP's were showing in cPanel after I had the DC re-enter my main IP address/gateway. But listed as not active due to the fact that they were not anywhere to be attached to the interface. i.e. eth0:1 eth0:2 etc and so on.
I have no idea where to begin looking for this problem and am afraid to reboot it again (at least until I get my lantronix spider up there). I've never experienced this with any of my other CentOS/cPanel servers either. All similar configurations CentOS 5.3 x64, latest cPanel as well. My hardware is all Supermicro gear as well and has been solid in the past.
Maybe I'm just missing something, granted I've only been managing Linux based servers for about two years now. This is actually the first real problem I've ran into on any Linux distro, they are normally pretty solid. So I assume it's a configuration error on my part somewhere.