Ubuntu Installation :: Python-lazr.uri After Upgrade To 10.04LTS 64bit?
May 28, 2010
After upgrading to 10.04LTR 64bit I encountered this problem below... I have already tried -f / --configure to no avail.
@ASUS-AMD64:~$ sudo apt-get upgrade Reading package lists. Building dependency tree Reading state information Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y
Setting up python-lazr.uri (1.0.2-1) dpkg (subprocess): unable to execute installed post-installation script: Exec format error dpkg: error processing python-lazr.uri (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: python-lazr.uri E: Sub-process /usr/bin/dpkg returned an error code (1)
View 6 Replies
ADVERTISEMENT
Nov 1, 2010
I initiated the on-line upgrade from 8.04 LTS to 10.04 LTS. When the upgrade finished and restarted the computer, I got the following messages:
ALERT! /dev/disk/by-uuid/32a1eb0a-c9a4-4867-ac4d-5fbb2acafa76 does not exist. opping to a shell! BusyBox v1.13.3 (ubuntu 1:1.13.3-1 ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
It leaves me at that initramfs prompt.
View 2 Replies
View Related
May 30, 2010
I've recently upgraded from 8.04LTS to 10.04LTS. About 90% of the time after boot-up, my mouse cursor seems to be corrupted; I can vaguely see the arrow (or part of it anyway) underneath some squiggly lines. The application KeePassX is affected too; there are some display corruption issues. Sometimes (maybe 1 boot in 10) the mouse cursor looks fine. I have a Radeon 9200 and have looked in the Forum for similar problems but they don't quite match up to mine.
View 1 Replies
View Related
Feb 22, 2011
I am running 10.04 LTS inside Windowsxp.LTS is totally updated.What is more,in the settings section of update manager I have ticked to show normal releases as well.Still,update manager is not displaying "10.10 is available"Thus,unable to upgrade.
View 3 Replies
View Related
Feb 11, 2011
I tried to upgrade to 10.10 using update manager but it gave the error below each time i tried.
View 7 Replies
View Related
Apr 9, 2011
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
View 6 Replies
View Related
May 23, 2010
After upgrading to 10.04LTS, I have this issue with ALL video players. Once the dvd begins to play, all I see is a white screen - no image. However, the sounds plays fine. What can I do to correct this?
Aside from this one issue, everything went fine in the upgrade process and I'm very happy with this new version.
View 9 Replies
View Related
May 7, 2010
I attempted a distribution upgrade from 8.04LTS (32 bit) to 10.04LTS (32 bit). Once converted, I had no wireless or wired internet, along with numerous other bugs. After relentless hours of trying to resolve the problems, I converted back to 8.04LTS and installed the b43 drivers; I have wireless, however, still no wired connection. I've provided the outputs of the "sudo lshw -C network" terminal command below both before conversion to 10.04 and after reversion back to 8.04LTS. You'll notice that the NIC is not even listed after reversion (this is the same output that 10.04LTS gave me as well).
1.) Does anyone know if the terminal command will identify the NIC if the NIC Driver (assuming it's tg3) is not installed?
2.) Does 8.04LTS and 10.04LTS have a pre-installed NIC driver that is not compatible with the bcm5705?
[Code].....
View 2 Replies
View Related
May 1, 2011
On upgrade I ran into this catch-22, and have almost 500 packages in limbo because of it. Any ideas on how to fix python-gobject or pycompile or whichever is angry?
Setting up python-gobject (2.28.3-1ubuntu1) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 322, in <module>
main()
File "/usr/bin/pycompile", line 299, in main
options.force, options.optimize, e_patterns)
[Code]...
View 4 Replies
View Related
Oct 7, 2010
I had problems with python stuff and so update manager did not work. Also many other problems, PiTiVi was installed but did not start eg... After many trials of this and that I removed python-gtk2 and so also ubuntu desktop. But was unable to get it back. Now I cannot even shut down. While it is not possible to install desktop or anything else, would it be possible to fix this by upgrading the whole system to 10.04 (10.10?)? Would it fix python installation. How could I do it. Some info tells to change sources.list and run apt-get upgrade, but some tell not to do so.
t@t:~$ update-manager
Traceback (most recent call last):
File "/usr/bin/update-manager", line 26, in <module>
[code]....
View 9 Replies
View Related
Nov 27, 2010
I'm encountering a python error in the beginning of the upgrade. See screenshot. How can this be solved or should I indeed file a bug report? Problem is that except for taking the picture, I've been unable to save the info.
View 3 Replies
View Related
Jan 25, 2010
i have a question about upgrading Ubuntu 9.1 32 bit to 64 bit. 32 bit is installed (triple booted ) and working fine, but i would like to upgrade to the 64 bit version. Is there a way to do this without re-installing the entire operating system? I downloaded the 64 bit version and i made a disk out of it. when i insert the disk (while booted in ubuntu) i get the message A distribution volume with software packages has been detected and i can choose from start package manager or run upgrade. when i pick upgrade, it starts to do its thing, but then fails with the message 'Unable to locate any package files, perhaps this is not a Ubuntu Disc or the wrong architecture?'. i booted from the disk and checked it, it says there are no problems with it.
is it even possible to do this without re-installing ubuntu completely?
View 2 Replies
View Related
Mar 30, 2011
How can I upgrade python-2.4.3 to python-2.5?
View 1 Replies
View Related
Apr 21, 2011
I'd like to upgrade from 32 bit to 64 bit ubuntu. Is it possible without reinstalling the whole system?
View 4 Replies
View Related
Aug 6, 2010
I'm running Ubuntu 10.4 64bit, and I would like to run python 32bit.The current Python version used is the 64bit one.What can be some good ways for installing the python 32bit version without compromising the OS. I'm kind of new to this, so I don't really know if I could substitute the python version, or know how to make it available by using short commands such as python or easy_install.
View 1 Replies
View Related
Mar 22, 2010
Short of the story is I have an AMD64bit system for my 'server'. I find that there is lacking package support for ubuntu 64bit. Some apps I want to install work fine on 32bit ubuntu but not in 64bit ubuntu. More importantly the 64bit package for my ati drivers don't work, however they do on a 32bit version of ubuntu.
It would make sense to do a fresh install of ubuntu 32bit to avoid problems like this in the future. However my server has been running for years.. since ubuntu6. And it is highly customized. It would take too long to configure my server from scratch, I really want to avoid that. So I'm wondering, next time I do a dist upgrade.. say from 9.10 to 10.04. Is there a way I could trick the update manager in to upgrading to 32bit packages/kernel etc?
View 2 Replies
View Related
Apr 11, 2010
I've just upgraded my 9.4 to 9.10 on my 64bit desktop PC. Shortly afterwards I noticed that MySQL had gone away. There was no mysqld running. I tried a restart to no effect. So tried an un-install and re-install with the Package Manager. This failed! There was quite an extensive message in details, which started:-
invoke-rc.d initscript mysql, action "start" failed
dpkg: error processing mysql-server-5.1 (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent prevent configuration of mysql-server
And it goes on, but that's the essence of it. I subsequently tried a complete removal and re-install, to no avail.I notice that /var/log/messages contains:
Apr 12 01:10:15 Mintaka kernel: [ 2538.821153] type=1505 audit(1271031015.407:259): operation="profile_replace" pid=9328 name=/usr/sbin/mysqld
Followed by many:
Apr 12 01:10:15 Mintaka kernel: [ 2538.885370] type=1503 audit(1271031015.477:260): operation="open" pid=9355 parent=9354 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
View 1 Replies
View Related
May 24, 2011
I've a 64-bit Ubuntu Linux machine. Linux version 2.6.28-14-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 Ubuntu 9.04
Linux Debian 5.0 ( 2.6.28-14-generic x86_64)
When I tried to install the python-dev package on it using the command sudo apt-get install python-dev, I got following messages.
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed: python-dev
0 upgraded, 1 newly installed, 0 to remove and 271 not upgraded.
Need to get 978B of archives.
After this operation, 24.6kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
python-dev
Install these packages without verification [y/N]? y
Err http://in.archive.ubuntu.com jaunty/main python-dev 2.6.2-0ubuntu1 404 Not Found [IP: 91.189.88.45 80]
Failed to fetch http://in.archive.ubuntu.com/ubuntu/...buntu1_all.deb 404 Not Found [IP: 91.189.88.45 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Tried with --fix-missing option as well. Same errors in this case also. How I can install python-dev package on 64-bit Ubuntu Linux machine?
View 2 Replies
View Related
Jun 23, 2011
How can I programmatically determine if my python script is being run with a 32 or 64 bit interpreter? Better yet, is there a one-liner I can run that will print out the word size of the current python session?
View 6 Replies
View Related
May 24, 2011
I'm using a Ubuntu Server 10.04 but I would like to get hold of some precompiled packages [URL] from a later repostiory (11.04).
How would I go about to do this?
View 1 Replies
View Related
May 3, 2010
I just purchased a HP G2-144DX.
Ubuntu 10.04 installed like a charm (I only need to find out why the headphones work but the main speakers do not), but at the end when the procedure ejected the CD, I immediately got:
I/O Error on Device sr0
repeated over and over for a couple dozen blocks.
I did a hard reset and the system is acting normally, but I'm wondering if other people have had the same problems?
Also, when running glxgears, is a score of 3000 normal for the Intel GMA HD video chipset?
View 3 Replies
View Related
May 19, 2010
Which package do I need to get libg2c.so install on 10.04LTS
View 3 Replies
View Related
Apr 30, 2010
I have somewhat managed to fix the laptop, x100e, by not being on battery and installing the ATI driver. But then the wireless doesn't work, nor do the drivers I had working with 9.10 (RT8192SE). So, that's scrapped. A laptop without wireless is pretty useless.Workstation does a complete lockup on login aswell. HasNvidia 9300 onboard card. But at this point, I don't want to find out what else is waiting when I fix that.I was really expect a rock solid release since it was going to be LTS. But at the moment it's pretty useless to download and I have been using Ubuntu since 7.xx series.
View 2 Replies
View Related
May 27, 2010
I am having trouble installing Ubuntu Server 10.04LTS on an IBM x3650 server (Model 7945 K2G). The install CD cannot find the drives, so I cannot continue with the installation. Manually selecting mptsas as the storage driver doesn't work either.I have tried various permutations:
1. 64 / 32 bit Ubuntu Server
2. Using weBIOS to configure a RAID0 redundant virtual drive or not
3. Loading BIOS defaults or messing with most of the related settings
This particular server makes use of the ServeRAID M1015 controller (based on an LSI SAS2008 device).
View 5 Replies
View Related
Aug 28, 2010
I just upgraded my server, and now I am stuck at "Kernel panic- not synching: VFS: Unable to mount root fs on unknown-block(0,0)" I have read other suggestions about booting to previous kernels to reinstall latest kernel, but that doesn't work since I can't boot to any kernel. How can I fix this with the restore cd or from grub2 command line. Reinstalling is not an option as I have lots of configurations that I don't want to lose.
View 5 Replies
View Related
Dec 1, 2010
I recently upgraded from 9.04 to 10.04LTS , i wanted to start a fresh and i click the option for Ubuntu to use entire hard-drive. However on closer inspection Ubuntu has created two partitions , one sized at 289 GB and the other at 8.5GB the 8.5GB partition is the one with the os installed on it. It is sadly locked and i cant combine the two partitions :/.
View 2 Replies
View Related
Dec 26, 2010
I just bought a USB Hard Drive to install ubuntu to show friends. I was able to boot the Live CD but I noticed the option to install to USB was missing. I believe I last saw this in 8.10. So, I went searching the forums for solutions but all I found was the Windows Executable "usb-installer.exe" . So, I try to look for this, its not there. Does anyone know what I need to do to do this? I'm going to be using this as a portable install across lots of different computers, Does this make a difference?
View 6 Replies
View Related
Apr 6, 2010
When I tried to install scribus, it shows: could not mark all packages for installation or upgrade. The following packages have unresolvable dependencies. Make sure that all required repositories are added and enabled in the preferences. python-tk: Depends: python (<2.6) but 2.6.2-0ubuntu1 is to be installed
View 1 Replies
View Related
Feb 25, 2010
I have been running 8.04LTS on a Sony Pentium III with Intel 810 chipset as a desktop system but with the servers installed so I could prototype web sites. The updates two days ago (Feb 23) have broken my theme display and screensaver. I can't get the background image to display like it used to do and none of the Applications Menu icons are showing. I have a second 8.04LTS system on a P4 Intel motherboard that got the same updates and is working fine, nothing broke that I can see.
I tried to use the 'Screens and Graphic' application to set the screen back to what I wanted but it wouldn't 'stick'. I finally hand edited xorg.conf so that it would boot up in a screen that I could use. Still, the 'X' close and min/max icons in the window corners still don't show. This makes it inconvenient to use though it still works as a web server. I dont' know where to look from here.
View 9 Replies
View Related
Jun 3, 2010
just upgraded from 9.10 to 10.04LTS and upon first reboot it gets stuck at the splash screen.. it just keeps loading over and over, nothing happens.I don't have the liveCD as I just did the download from the internet via Synaptic Softwarethis is what I tried:hit ESC when GRUB menu loads.. tried to hit "e" on the boot option and nothing happens.. I was told changing quite splash to nomodeset would fix it but it doesn't even say quiet splash, unless someone wants to walk me through it.I'm soo frustrated, I have tons of e-mails and documents that I need to save.is there a fix to get me back in just so I can copy my emails and docs and do a fresh install?
View 1 Replies
View Related