Ubuntu Installation :: Installing 10.04LTS On IBM X3650 Server?

May 27, 2010

I am having trouble installing Ubuntu Server 10.04LTS on an IBM x3650 server (Model 7945 K2G). The install CD cannot find the drives, so I cannot continue with the installation. Manually selecting mptsas as the storage driver doesn't work either.I have tried various permutations:

1. 64 / 32 bit Ubuntu Server

2. Using weBIOS to configure a RAID0 redundant virtual drive or not

3. Loading BIOS defaults or messing with most of the related settings

This particular server makes use of the ServeRAID M1015 controller (based on an LSI SAS2008 device).

View 5 Replies


ADVERTISEMENT

Ubuntu Installation :: Double Failure With Installing 10.04LTS?

Apr 30, 2010

I have somewhat managed to fix the laptop, x100e, by not being on battery and installing the ATI driver. But then the wireless doesn't work, nor do the drivers I had working with 9.10 (RT8192SE). So, that's scrapped. A laptop without wireless is pretty useless.Workstation does a complete lockup on login aswell. HasNvidia 9300 onboard card. But at this point, I don't want to find out what else is waiting when I fix that.I was really expect a rock solid release since it was going to be LTS. But at the moment it's pretty useless to download and I have been using Ubuntu since 7.xx series.

View 2 Replies View Related

Ubuntu Installation :: Upgrade From 8.04LTS To 10.04LTS?

Nov 1, 2010

I initiated the on-line upgrade from 8.04 LTS to 10.04 LTS. When the upgrade finished and restarted the computer, I got the following messages:

ALERT! /dev/disk/by-uuid/32a1eb0a-c9a4-4867-ac4d-5fbb2acafa76 does not exist. opping to a shell! BusyBox v1.13.3 (ubuntu 1:1.13.3-1 ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)

It leaves me at that initramfs prompt.

View 2 Replies View Related

Ubuntu Networking :: 10.04 - 8.04LTS And 10.04LTS Have A Pre-installed NIC Driver That Is Not Compatible With The Bcm5705?

May 7, 2010

I attempted a distribution upgrade from 8.04LTS (32 bit) to 10.04LTS (32 bit). Once converted, I had no wireless or wired internet, along with numerous other bugs. After relentless hours of trying to resolve the problems, I converted back to 8.04LTS and installed the b43 drivers; I have wireless, however, still no wired connection. I've provided the outputs of the "sudo lshw -C network" terminal command below both before conversion to 10.04 and after reversion back to 8.04LTS. You'll notice that the NIC is not even listed after reversion (this is the same output that 10.04LTS gave me as well).

1.) Does anyone know if the terminal command will identify the NIC if the NIC Driver (assuming it's tg3) is not installed?

2.) Does 8.04LTS and 10.04LTS have a pre-installed NIC driver that is not compatible with the bcm5705?

[Code].....

View 2 Replies View Related

Ubuntu :: Mouse Cursor / Video Corrupted After Upgrade From 8.04LTS To 10.04LTS

May 30, 2010

I've recently upgraded from 8.04LTS to 10.04LTS. About 90% of the time after boot-up, my mouse cursor seems to be corrupted; I can vaguely see the arrow (or part of it anyway) underneath some squiggly lines. The application KeePassX is affected too; there are some display corruption issues. Sometimes (maybe 1 boot in 10) the mouse cursor looks fine. I have a Radeon 9200 and have looked in the Forum for similar problems but they don't quite match up to mine.

View 1 Replies View Related

Ubuntu Installation :: Use 11.04 Repository On 10.04LTS?

May 24, 2011

I'm using a Ubuntu Server 10.04 but I would like to get hold of some precompiled packages [URL] from a later repostiory (11.04).

How would I go about to do this?

View 1 Replies View Related

Ubuntu Installation :: 10.04LTS - Errors After It Ejects The CD?

May 3, 2010

I just purchased a HP G2-144DX.

Ubuntu 10.04 installed like a charm (I only need to find out why the headphones work but the main speakers do not), but at the end when the procedure ejected the CD, I immediately got:

I/O Error on Device sr0

repeated over and over for a couple dozen blocks.

I did a hard reset and the system is acting normally, but I'm wondering if other people have had the same problems?

Also, when running glxgears, is a score of 3000 normal for the Intel GMA HD video chipset?

View 3 Replies View Related

Ubuntu Installation :: Cannot Find Libg2c.so For 10.04LTS

May 19, 2010

Which package do I need to get libg2c.so install on 10.04LTS

View 3 Replies View Related

Ubuntu Installation :: Unable To Upgrade From 10.04LTS To 10.10

Feb 22, 2011

I am running 10.04 LTS inside Windowsxp.LTS is totally updated.What is more,in the settings section of update manager I have ticked to show normal releases as well.Still,update manager is not displaying "10.10 is available"Thus,unable to upgrade.

View 3 Replies View Related

Ubuntu Installation :: Upgraded From 8.04LTS 10.04.1LTS , Now I Can't Boot.

Aug 28, 2010

I just upgraded my server, and now I am stuck at "Kernel panic- not synching: VFS: Unable to mount root fs on unknown-block(0,0)" I have read other suggestions about booting to previous kernels to reinstall latest kernel, but that doesn't work since I can't boot to any kernel. How can I fix this with the restore cd or from grub2 command line. Reinstalling is not an option as I have lots of configurations that I don't want to lose.

View 5 Replies View Related

Ubuntu Installation :: Upgraded From 9.04 To 10.04LTS - Can't Use Hard Drive

Dec 1, 2010

I recently upgraded from 9.04 to 10.04LTS , i wanted to start a fresh and i click the option for Ubuntu to use entire hard-drive. However on closer inspection Ubuntu has created two partitions , one sized at 289 GB and the other at 8.5GB the 8.5GB partition is the one with the os installed on it. It is sadly locked and i cant combine the two partitions :/.

View 2 Replies View Related

Ubuntu Installation :: Usb-installer Missing In 10.04LTS Release?

Dec 26, 2010

I just bought a USB Hard Drive to install ubuntu to show friends. I was able to boot the Live CD but I noticed the option to install to USB was missing. I believe I last saw this in 8.10. So, I went searching the forums for solutions but all I found was the Windows Executable "usb-installer.exe" . So, I try to look for this, its not there. Does anyone know what I need to do to do this? I'm going to be using this as a portable install across lots of different computers, Does this make a difference?

View 6 Replies View Related

General :: Partition Apache And MySQL Database (IBM X3650 M3 6x300GB SAS)

Dec 17, 2010

how to configure a web/database server.

Given:

IBM x3650 M3 with 6 x 300GB SAS and 16GB RAM CentOS 5.5 (LAMP) Software RAID with LVM haven't tried hardware RAID.

Here's the task:

Task 1. 3x300GB SAS will goes to /boot, /root, /var* and swap (RAID1 for /boot and RAID5 for the rest with LVM). Task 2. 3x300GB SAS will goes to MySQL Database (RAID5 and LVM). * My web content will be stored here. (/var/www/html)

I know how to perform Task 1, but I'm not familiar with Task 2. So how it can be done? What specific directory should i used to store my database?

View 1 Replies View Related

Ubuntu Installation :: 8.04LTS Updates Broke Screen Displays

Feb 25, 2010

I have been running 8.04LTS on a Sony Pentium III with Intel 810 chipset as a desktop system but with the servers installed so I could prototype web sites. The updates two days ago (Feb 23) have broken my theme display and screensaver. I can't get the background image to display like it used to do and none of the Applications Menu icons are showing. I have a second 8.04LTS system on a P4 Intel motherboard that got the same updates and is working fine, nothing broke that I can see.

I tried to use the 'Screens and Graphic' application to set the screen back to what I wanted but it wouldn't 'stick'. I finally hand edited xorg.conf so that it would boot up in a screen that I could use. Still, the 'X' close and min/max icons in the window corners still don't show. This makes it inconvenient to use though it still works as a web server. I dont' know where to look from here.

View 9 Replies View Related

Ubuntu Installation :: Python-lazr.uri After Upgrade To 10.04LTS 64bit?

May 28, 2010

After upgrading to 10.04LTR 64bit I encountered this problem below... I have already tried -f / --configure to no avail.

@ASUS-AMD64:~$ sudo apt-get upgrade Reading package lists. Building dependency tree Reading state information Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y
Setting up python-lazr.uri (1.0.2-1) dpkg (subprocess): unable to execute installed post-installation script: Exec format error dpkg: error processing python-lazr.uri (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: python-lazr.uri E: Sub-process /usr/bin/dpkg returned an error code (1)

View 6 Replies View Related

Ubuntu Installation :: 10.04LTS Splash Screen Takes Way Too Long?

Jun 3, 2010

just upgraded from 9.10 to 10.04LTS and upon first reboot it gets stuck at the splash screen.. it just keeps loading over and over, nothing happens.I don't have the liveCD as I just did the download from the internet via Synaptic Softwarethis is what I tried:hit ESC when GRUB menu loads.. tried to hit "e" on the boot option and nothing happens.. I was told changing quite splash to nomodeset would fix it but it doesn't even say quiet splash, unless someone wants to walk me through it.I'm soo frustrated, I have tons of e-mails and documents that I need to save.is there a fix to get me back in just so I can copy my emails and docs and do a fresh install?

View 1 Replies View Related

Ubuntu Installation :: Update Manager Shows No Path From 9.10 To 10.04LTS

Nov 13, 2010

I'm upgrading my machines UDTE-64 from 9.10 to 10.4LTS. 9.10 is working fine. I just want to upgrade to a current LTS release.Update manager showed the way on one desktop and I upgraded successfully.On another desktop and a laptop, update manager does not show that a new release is available. It's fair game to tell me to use the live cd so long as I preserve user data.

View 5 Replies View Related

Ubuntu Installation :: Can't Upgrade From 10.04LTS To 10.10 - Same Error Each Time / Solve This?

Feb 11, 2011

I tried to upgrade to 10.10 using update manager but it gave the error below each time i tried.

View 7 Replies View Related

Ubuntu Installation :: After Re-installing Mysql-server-5.1 - Giving Error Message At End Of Installation When Trying To Start Server

Mar 3, 2011

I'm using Ubuntu 10.04 LTS - the Lucid Lynx.

I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".

But its giving error message at the end of installation when its trying to start the server.

The error message is as follows.

When i tried to start the server after the installation, i get this error message

Note : The file "/etc/mysql/my.cnf" is empty.

View 1 Replies View Related

Ubuntu Installation :: Grub Rescue Error During 10.04LTS To 10.10 Upgrade + USB Won't Boot

Apr 9, 2011

I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:

Code:

error: the symbol 'grub_xputs' not found.
grub rescue>

I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.

View 6 Replies View Related

Ubuntu Installation :: After Upgrade To 10.04LTS, Playing Dvd Shows White Screen

May 23, 2010

After upgrading to 10.04LTS, I have this issue with ALL video players. Once the dvd begins to play, all I see is a white screen - no image. However, the sounds plays fine. What can I do to correct this?

Aside from this one issue, everything went fine in the upgrade process and I'm very happy with this new version.

View 9 Replies View Related

Ubuntu Installation :: Network-Manager Missing After Update - Lynx 10.04LTS

Aug 20, 2010

I did the normal sudo apt-get update and upgrade this morning and after a restart, the network-manager is gone!

nm-applet command does not work anymore.

Can I add the LAN ethernet interface using ifconfig and connect to the net to install the network-manager again?

View 5 Replies View Related

OpenSUSE Install :: No Video After Boot With IBM X3650 And Embedded ES1000 Display Adapter?

Aug 2, 2010

I was wondering if anyone else ran into and issue with 11.3 with an IBM x3650 server using the embedded graphics card. As a reference this exact machine was working under 11.2. I am aware that there were significant changed in how video works in 11.3.

While installing and during the initial start of the operating system I can see graphical output, OPEN SUSE logo and such.

During the boot process the screen goes blank. The server is still running and I am able to ssh to the machine, but there is no access to the console.

Below is a segment of the /var/log/boot.msg that shows some errors. I can provide more logs if that would assist in tracking this down.

I did a quick google search on ES1000 and i2c and saw the same errors reported with Ubuntu version but nothing for OPENSUSE. There seemed to be a bug that was fixed in that kernel.

<6>[ 2.277737] [drm] radeon: cp idle (0x00008080)
<6>[ 2.277767] [drm] Loading R100 Microcode
<6>[ 2.277770] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
<6>[ 2.279454] [drm] radeon: ring at 0x00000000B0000000
<6>[ 2.279476] [drm] ring test succeeded in 1 usecs
code....

This is a new install and the machine is not yet in production so I have the option to experiment with it a bit.

View 4 Replies View Related

Ubuntu Installation :: Dell Netbook With 8.04lts The Network Manager Has Been Deleted And Unable To Install A New One?

Nov 16, 2010

I have a dell netbook with 8.04lts the network manager has been deleted and I am unable to install a new one

View 1 Replies View Related

Ubuntu Installation :: Installing My Sql Server ?

Sep 20, 2010

There are no .exe files which you just click on and then follow the instructions like windows. I'm having troubles installing my sql server. I need to install mysql-5.1.50-linux-i686-glibc23.tar.gz. The website is [url]. I tried some commands in the terminal but it's of no help.

I also need to install earlier versions of firefox (at least before 3.6). So I downloaded 3.5.13 from the mozilla website but have no clue on how to install it.

View 2 Replies View Related

Ubuntu Installation :: Installing DenyHosts On 9.10 Server?

Mar 8, 2010

i am trying to install denyhost on ubuntu 9.10 server, to make it run as daemon.I am following steps from this linkI have downloaded version 2.5 of denyhosts, but i cannot find thi sfile/usr/bin/denyhosts.py

View 1 Replies View Related

Ubuntu Installation :: Making Or Installing A FTP Server?

Mar 24, 2010

i need to make a FTP server, i tried using the forums but well.... it was no good, i tried with svftpd but i still lack of knowledge and everything.

View 3 Replies View Related

Installation :: Log Off All Steps When Installing Ubuntu Server?

Jun 13, 2010

I'm about to install Ubuntu Server 10.04 on my home server. I have looked around, a lot, without finding a nice way to record or log all the steps of the installation.

I see two general paths of how my problem might be solved:
Is there any installation log file which I could look in to see which options I choose? It would be best if it included all steps, including partitioning and, in my case, setting up an encrypted volume with a KVM-volume inside it.
Are there any ways to record the installation or take screenshots of it? It's done using the console (with no X window system available). Maybe fbgrab could work, but I do not know how to make it available during the installation.
I could also use a pen and paper. But that is error prone as I do not have the patience to write everything down. It's my last resort though.

View 3 Replies View Related

Ubuntu Installation :: Can't See HD While Installing Server 10.04 / Resolve That?

Aug 3, 2010

I'm installing ubuntu server 10.04 on HP Proliant DL140 G3, but in the partition part, HD doesn't appear.

two SATA disks are configured as RAID1, the card is HP Embedded SATA RAID, which came along with the server.

fdisk shows there're two disks, sda and sdb.

Ubuntu website says HP DL140 is certified.

is it because lack of drives?

View 2 Replies View Related

Ubuntu Installation :: Error While Installing Server 10.10

Jan 29, 2011

I'm trying to install server 10.10. I shose my language, than i give the command to install the server. At that moment my screens gets black. A couple of minutes later i get te following screen..

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved