Ubuntu Installation :: Graphics Driver - 10.10 - Get A Black Screen Of Nothing On Restart

Aug 7, 2011

i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.

[Code]...

View 1 Replies


ADVERTISEMENT

Ubuntu :: Black Screen After Installing Graphics Driver?

Nov 27, 2010

just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.

Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.

View 2 Replies View Related

Ubuntu Installation :: Black Screen After Restart The Computer?

Jun 25, 2010

Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.

Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.

View 4 Replies View Related

Ubuntu Installation :: Black Screen With GMA HD Graphics?

Nov 20, 2010

I'm trying to run 10.10 off a USB. On one computer with a nice discrete AMD graphics card, the thing boots fine. On a Dell Latitude e6510 with Intel HD Graphics (the one that comes with a Core i7) I get to the boot screen, the initial text crawl, and then the screen blanks.

Now, I can hear the standard Ubuntu start up noise about 20 seconds later so I know everything is running, just the video driver is not.

I can not do a CD install or anything off the hard drive, only the USB. I'm wondering if anyone knows some edit you can do at the boot menu (using tab) to revert to some graphics safe mode.

View 4 Replies View Related

Ubuntu Installation :: Dual Boot With An I8xx Graphics Chip On 10.04 - Get Black Screen Of Death

May 26, 2010

I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.

Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.

View 6 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

Ubuntu Installation :: Black Screen Boot-up After NVidia Driver Install?

Nov 8, 2010

I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21

View 9 Replies View Related

Debian Installation :: Radeon ATI Gives Black Screen, Even With Nonfree-driver?

Jul 15, 2011

The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]

View 5 Replies View Related

Ubuntu Installation :: X201 Black Screen On Bootup With 10.04 RC (can't Get Intel Xorg Driver To Install)

Apr 27, 2010

Pretty much what the title says.. a few more details:

- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)

I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).

View 4 Replies View Related

Debian Installation :: Black / Blank Screen - Nvidia Driver Wouldn't Install

Apr 29, 2011

After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.

View 1 Replies View Related

Ubuntu :: Why Does 10.04 Crash - Screen Goes Black And Have To Restart

May 23, 2010

10.04 runs perfectly most of the time, then every once-in-awhile it crashes. The screen goes black and I have to restart. I had a similar problem with 9.10, so I reverted back to 8.04 which never crashed. I did a fresh install of 10.04.

View 9 Replies View Related

Ubuntu :: Sudden Black Screen Until Restart Computer

Jul 23, 2010

[code]...

this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu

View 2 Replies View Related

General :: Ubuntu 10.04 Upgrade - Restart Step Black Screen

Jul 25, 2010

so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!

View 1 Replies View Related

Ubuntu :: Black Screen On 10.04 Boot - Works On Low Graphics?

May 1, 2010

Ubuntu has been crashing on boot. I used a recovery mode kernal and went into failsafe mode, upon which point a msgbox told me to switch to low graphics. Then Ubuntu looked completely normal and functional with no problems. To me - an Ubuntu amateur, it seems like a driver problem and that running in failsafe mode will have its setbacks.

View 9 Replies View Related

Ubuntu :: Low Graphics Mode - Screen Suddenly Goes Black

May 30, 2010

The last few days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message:
Ubuntu is running in low-graphics mode
There is some buttons that tells me I can do different things (like reconfiguration ) but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution. I have not found any way to reproduce this behavior. It has happened after being logged in for several days and sometimes just after boot and login when I'm starting an xterm and in all time intervals in between the output of:

sudo lshw -C display
PCI (sysfs)
*-display
description: VGA compatible controller
product: 82G33/G31 Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0 .....

View 6 Replies View Related

Ubuntu :: Screen Sometimes Suddenly Goes Black And Go Low Graphics Mode

Jun 3, 2010

Recently upgraded to 10.04 after countless problems w/ Karmic & already problems with Lucid! The screen sometimes suddenly goes black, then goes into low graphics mode, if I let it, thereby changing screen rez & unless I reboot, I am stuck in this mode. If I don't choose temporary low graphics mode, I must reboot. Many others seem to be experiencing the same problem yet have been offered no solution by the developers. So.

View 9 Replies View Related

Ubuntu :: Boot To Black Screen After Safe Graphics?

Jun 6, 2010

In effort to fix garbled text when scrolling I attempted to boot into safe graphics mode. I now get to the login screen, enter password and then go to black screen.

Kubuntu 10.04 upgrade
geforce FX5200 graphics card
2gb memory
AMD XP2800+

View 1 Replies View Related

Ubuntu :: Installing New Graphics Card - Screen Went Black

Mar 30, 2011

I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.

I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...

After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.

fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind

It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10

View 7 Replies View Related

Debian :: Restart System Xorg (GDM) Don't Run - Black Screen

Jan 28, 2010

I upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.

View 4 Replies View Related

Ubuntu Installation :: NVIDIA Graphics Driver - Graphics Mode Option Via The Start (GRUB)?

Jan 26, 2010

I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.

View 4 Replies View Related

Ubuntu :: Black Screen After Installing New Drivers For Graphics Card

Jan 8, 2010

When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).

View 3 Replies View Related

Ubuntu :: Ati Graphics - 10.10, OC'ing - Get A 'black-ish' Screen - Get Into Text Mode From Booting Up?

Dec 31, 2010

What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........

How do i get into text mode from booting up?
How can i fix this?!

I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....

Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled

View 2 Replies View Related

OpenSUSE Install :: Black Screen (11.2) On Restart After Installing Some Items

Nov 11, 2010

A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.

View 5 Replies View Related

Hardware :: Intel Graphics And Games - Black Screen

Mar 17, 2011

I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).

lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....

I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).

View 14 Replies View Related

Ubuntu :: Just Changed Graphics Resolution In STARTUP MANAGER - Black Screen

Jan 18, 2010

I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?

the weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptop im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.

View 1 Replies View Related

OpenSUSE Install :: Dell M4500 Black Screen, No Video After First Restart?

Aug 22, 2010

having trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:

intel QM57 chipset
i7 extreme 920xm
quadro fx 1800m

am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.

View 2 Replies View Related

OpenSUSE :: Dual Monitor - Nvidia Driver With X Screen - Shows A Black Screen

Feb 5, 2011

I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.

View 1 Replies View Related

General :: 82845G Graphics Controller - Screen Goes Black After Logging In

Jan 14, 2010

I have installed the latest debian on a dell optiplex gx260 which has a 82845G chipset and there are some strange problems.The system is configured with autologon as a standard user. Sometimes, after logging on, the screen goes black but if I connect to it with vnc, I get a working desktop. Yesterday I booted it without a display attached to it and now I cannot set it to the right screen resolution anymore (1440 x 900) which was working fine before.

I have googled and searh the forum but cannot find the right information. According to Intel, the latest driver should be in the distro but I cannot find any details about that (version/date). grep Driver /etc/X11/xorg.conf returns

[Code]....

View 15 Replies View Related

OpenSUSE Hardware :: Intel I7 HD Graphics Gives Black Screen Sometimes On Boot Kernel 2.6.37 Rc7

Dec 30, 2010

Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.

I have tried the following so far to identify the issue or isolate it:

- Switching to the console screens has no effect, still the black / blank screen.

- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available

- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver

- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.

Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?

View 9 Replies View Related

OpenSUSE Hardware :: Black Screen With Radeon HD 4200 - With All Graphics Drivers?

Jul 17, 2011

I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:

* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen

[code]...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved