I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code: You don't have permission to access /po/ on this server. So I go to the logfile; which says this: Code: [Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I am having problems gaining access to the BackupPC admin web page. The error:
[Tue Feb 22 16:43:59 2011] [error] [client 192.168.0.2] (13)Permission denied: Could not open password file: /etc/BackupPC/htpasswd [Tue Feb 22 16:43:59 2011] [error] [client 22.214.171.124] access to /backuppc failed, reason: verification of user id 'myhtaccessuser' not configured
Why is this occuring, is there anyway of getting around this? I just cant remember originally on my old system how I set this up.
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.
Appear sometimes ago a message: E: Opening /etc/apt/sources.list - ifstream::ifstream (13: Permission denied) I'm trying update my computers but I don't get.. Please.. All my docs, movies and pictures are in this PC... What Can I Do to fix?
I'm trying to install Amanda 3.2 on Ubuntu 10.10 (Maverick) using Ubuntu 10.04 deb package. The installation was successful using the dpkg command. The problem crops up when configuring such amanda. When creating a user amandabackup using passwd amandabackup and then enter in it through su - amandabackup a permission denied problem comes up. When enter amserverconfig Dailyset 1 etc etc the server response with : amservingconfig: critical (fatal): Cannot create debug file "/var/log/amanda/server/amserverconfig.2010120307947.debug": Permission denied and continues The permissions are set to rw 1 amandabackup backup. I can't understand why it's telling me permission denied each time.
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.
I have Ubuntu10.10 in my HP-laptop. I am trying to install ANSYS. There is an install file in setup. When I try to give install in terminal, being in the same directory it says, command not found. I tried ./INSTALL, it says "bash: ./INSTALL: Permission denied". I also tried from my home folder with full path for the install file, as the readme file says, "To install, enter the full path to the installation program on the media or to the downloaded installation files". I don't know what to do. I have these setup file in my external hard drive.
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
I'm trying to configure my /usr/share/ettercap/etter.dns for dns spoofing with ettercap. but when I change the file and try to save it ubuntu says permision deneight Even when I try doing this from the terminal with sudo. It seems there is know way to change the file.
An uncaught exception was raised: [Errno 13] Permission denied: '/media/e6f6ac46-4bfc-487b-9c81-aab706ead9e3/boot'
The above is the error message I get when I try to create an usb-flash boot drive. I downloaded the iso for Mint10 and use the "create startup disk" program to create the boot drive. I can see both the iso and the flash drive within the program, but when I click on "create disk" I get the above error message?
I have 3rd party software that I need to install. It is called VNMRJ. It is packed as one .tar. I extracted the .tar to the desktop (under root) and want to start the installation. However, during the installation process, all .tar files included the the package (sub directories) can't be extracted by the installation routine. For every .tar I get the error
tar: /root/Desktop/vnmrj21b_inova_01106/code/common/com.tar: Cannot open: Permission denied Installation of VNMR failed tar: Error is not recoverable: exiting now DONE: 112 KB
I installed MATLAB R2009a in my laptop (Fedora 14 x86-64), the installation was succesful but when I run MATLAB (in a console), appears a message: error while loading shared libraries: libut.so: cannot enable executable stack as shared object requires: Permission denied
I find a "solution", execute in a terminal: execstack -c libut.so
I used several times with differents libraries that I needed, but I run MATLAB in a terminal, MATLAB starts in a terminal, only a prompt ">>" and nothing.
I'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
I am running Ubuntu 10.04 as a dual boot on my laptop next to Win 7. I installed using all defaults, as I am pretty much a novice user. I also put 10.04 on my desktop at home, but did not install. I am running that machine ON the Win 7 partition. My problem is that on my desktop, I get a boot option of Windows or Ubuntu from the MBR, and Windows is the default. If I choose Ubuntu, I then get the Grub menu which defaults to Ubuntu (fine, I already chose that).
On my laptop (where I did the full install on its own partition) Grub takes over, which would be fine but for Ubuntu being the default. I really want the default to be Win 7. I have read several posts, and a tutorial on changing the boot order in Grub, but when I try to access the file mentioned (etc/default/grub) I get an error "Permission Denied". I have made myself Administrator, so I should have access to everything. I know I need to change the line GRUB_DEFAULT=0 to GRUB_DEFAULT=6 to make this work, but I cannot open the file. Is there an easier way of doing this? Honestly, if you want novice users to try out Ubuntu, sending them to command line is NOT the way. The great majority of people that might be willing to try Ubuntu will run for the hills at the simple suggestion of command line. Most everything else you do is handled by an app, why not this?
A few days ago I tried to install a driver for a Brother printer (HL-5040) in terminal mode by issuing "sudo dpkg -i --force-all hl5040lpr-1.1.2-1.i386.deb" on my Ubuntu 9.10 PC.
During the process several error messages were displayed. All of them say "permission denied" to access a directory /etc/init.d/lpd. Consequently, the installation failed and Synaptic package manager does not work any more and becomes broken.
Questions: Why did I get "permission denied" as a su? How can I get around the problem so I can re-install the driver?
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.