Ubuntu Installation :: Get A List Of Pre-installed Packages?
Jun 10, 2011
I'm working on a script that keeps track of user explicitly installed packages (no deps, no default packages), where can I found a list of ubuntu natty preinstalled packages ? Is there some file in the filesystem or in installation disc ?
View 3 Replies
ADVERTISEMENT
Mar 3, 2010
How can I list what i have installed for current packages, excluding what normally comes with a fresh install of 9.10?
View 8 Replies
View Related
Feb 19, 2010
I wounder how I should do to find out what packages I have explicitly installed on the system, NOT including the dependencies. The purpose is to get a figure of what packages I need to install when I reinstall my system.In Gentoo one can look at the world-file (/var/lib/portage/world) which is a list of my explicitly installed packages, not including system packages (located in /var/lib/portage/system)
View 1 Replies
View Related
Apr 8, 2010
I'm reinstalling an ubuntu machine that does not boot anymore. I have a complete backup of all the files that were on the harddrive.
I would like to make a list of all the programs that were installed, so I can re-install them on the fresh install.
I've found the following procedure, but this method requires that the machine still boots. (and my machine does not boot anymore) code...
Is it possible to get a list of installed packages from the backup of an ubuntu machine?
PS, My appologies for my English, I'm dutch
View 1 Replies
View Related
Sep 14, 2010
I'm using ubuntu 10.04 Is it possible to get a list of all packages installed after the initial installation?
View 4 Replies
View Related
Nov 25, 2010
I know I can do a dpkg --get-selections to get a list of installed packages. Is there a way to get the version of the package listed as well?
View 1 Replies
View Related
Feb 23, 2011
In MacPorts, the ports I would be looking for are the requested ports. They have a system so that when you install a port, that port is marked as requested. Also if you want to keep a port that was installed as a dependency, you can set it to be requested manually. Does the Debian system have the same functionality? It seems that there are some utilities that get that done..
View 3 Replies
View Related
Mar 28, 2010
how do I save installed packages in a list and restore ...
rpm -qa > installed-software.log
yum install $(cat installed-software.log)
sorting rpm packages by size
rpm -qa --qf '%{SIZE} %{NAME}
' | sort -n
View 4 Replies
View Related
Jun 23, 2010
I'm migrating to a new Lucid Lynx machine, and I'd like to install all of the packages that I currently have installed on my old machine.Is there a way to query a list of all packages that are currently installed on a particular system, such that I could simply throw this list at apt-get on a new system
View 3 Replies
View Related
Sep 17, 2010
I'd like to list all packages I installed since the installation. The tricky part is that I don't care for dependencies - only clean list of what I ordered to install. I went through man pages and I did not find anything relevant. Also /var/log/apt/history* doesn't say what I requested and what came as a dependency.
For gentoo-aware folks, I am looking for something like "world" file.
View 1 Replies
View Related
Dec 20, 2010
I am having to reinstall ubuntu because of my silly mistake. Anyway, my questions is, when booting from live cd, how would I get the terminal to print out what I have listed on my actual hard drive? I know this works if I am logged into my actual Ubuntu hard drive, but I can't do that: dpkg --get-selections > installed-software.I am trying to get a list of installed packages because I can't actually boot into my current ubuntu hard drive
View 2 Replies
View Related
Feb 11, 2011
I know dpgk --get-selections will list all installed packages, but is there a way to also get the repository each belongs to as well.
View 3 Replies
View Related
May 12, 2011
I want to see all packages of a software in Ubuntu.
View 7 Replies
View Related
Apr 20, 2016
How do you list only installed packages that were not installed automatically? I see in aptitude that it will list whether they were installed automatically or not, but it is hard to find them because the are a lot more installed automatically than non-automatically.
View 1 Replies
View Related
May 3, 2010
I can't remember if branch is the correct term but I am talking stable, testing or unstable.
i have looked through the dpkg and aptitude man pages but can't seem to find if there is a way to search which packages on the system are installed from a specific branch. Is there a way to do this?
View 2 Replies
View Related
Feb 19, 2010
how to get yum to list all of the packages currently installed from a specific repository?
View 2 Replies
View Related
Apr 21, 2011
I want to list all installed packages by keyword. For example I want to know what packages were installed related to "game". How can I do that in Fedora?
I tried 'yum list installed', 'you search' ... but still can't find a solution. I'm not a yum expert .
View 2 Replies
View Related
Feb 12, 2010
way to have apt or dpkg print out a list of all the installed packages? Preferably in a format that I can simply add 'apt-get install' in front of.
View 2 Replies
View Related
Jan 5, 2010
I would like to know what packages are currently installed in my linux machine. My machine is running CentOS 5.4. There is no GUI. All I have is command line interface.
View 2 Replies
View Related
Jul 29, 2011
Is there any way that I can get a list of packages (on the command line) that have been installed manually i.e. all those that haven't been installed as dependencies? I think this must be possible as apt seems to know which dependency packages are no longer required i.e. apt-get autoremove
View 2 Replies
View Related
Jan 11, 2016
I have realized that in not installing suggested packages I've missed out on a ton of doc files, which would really come in handy while I'm away from internet access.
Is there a way take a list of currently installed packages and find out which of them have doc packages available? Possibly install them in a single step? I have been playing around with aptitude and apt-rdepends, but I'm not quite sure how to go about this. Somehow take a list of installed packages, run it through an apt-cache search, and end up with a list of -doc packages to install? My bash-fu isn't the greatest, and I suppose this could be a bad idea to begin with.
View 4 Replies
View Related
Jun 25, 2010
I have a system that will not boot as /usr has been destroyed and I would like to get a list of installed packages before re-installing. I know that it's possible to get this using dpkg or apt, but I cannot run those.
Where in the filesystem is this information stored and what's the best way to get a list of installed apps from the files?
View 2 Replies
View Related
May 31, 2010
I have a dead system that was running Debian Linux (lenny). I can boot into emergency mode, but nothing else. I will likely have to reinstall Debian. I've read lots of things online about how to get a list of currently installed packages. Which is fine and dandy if the system is working and I can log into it. I'm basically wanting to extract such a list from a hard drive containing an installation I can't log into normally. I can access the filesystem just fine, and nothing related to aptitude has been damaged.
View 3 Replies
View Related
Jul 21, 2011
I was working on my flash drive install of Ubuntu, when I squashfsed my /usr. Long story short, I some how ended up with a working /usr, but with a few packages marked as installed, but not having its components installed (emacs). When I try to remove emacs (emacs23-nox), it gives me numerous errors about files (all relating to emacs) not existing (all in /usr). Thus my questions are as follows:
1) Is there a way to force the removal without it caring about missing packages?
-OR-
2) Is there a way to reload which packages are installed by checking which files exist, etc?
-OR-
3) Should I just nuke and re-install?
View 1 Replies
View Related
Feb 23, 2011
Can I keep the old 32bit_testing /home with all the hidden directories there when moving to 64bit_testing?
Is there a way to export a list of all installed packages in aptitude or synaptic, so that when reinstalling, it can be easily imported? (reinstalling the same system)
View 3 Replies
View Related
Feb 22, 2011
I need to get names of all installed packages in 2 machines and save them in 2 text files, then I want to compare these 2 files to know the differences between 2 files and from that I could know the differences between 2 machines. Is it possible to do that and what program I could use?
View 2 Replies
View Related
Nov 24, 2010
I've been google'ing around recently for some good solutions for creating local yum "update" repositories without syncing entire repositories. (or adding hundreds of exclude statements in config files)
I have several boxes with a common base build (centos 5.5/x86_64), one has nagios3, another has apache, and another tomcat6 (also a couple of others) For tomcat and nagios I'm obviously using 3rd party repositories (jpackage, epel, rpmforge to name a few) Everything is installed via RPM from kickstart.
I would like to make an updates repository which contains the updates for everything that's installed (including centos base).
Updates will be downloaded on a separate box, but not sure how to get the list of packages required on that box where the packages are not actually installed. I've looked at reposync and mrepo, but appear to be syncing from what's available rather than what's required.
I was hoping that I can provide an "rpm -qa" output, compare this to a "yum list" or perhaps running "yum check-update" on a list rather than installed packages. I could then use the yum-downloadonly module to get the packages which have changed from available sources.
View 2 Replies
View Related
Sep 16, 2010
I had clicked the link to change system packages to the ones in the packman repo. After hitting accept everything went well until it was at least 90% done, and then it froze, mouse stopped moving. So I waited a while, and after nothing happened I rebooted my computer. Now the first time I tried to go back into the software update section it gave me an error: "cannot read the list of installed packages"
and kicked me out. After trying to go in again this time it worked, however it won't install anything anymore and just gives me the error that whatever I want to install failed, for example trying to install VLC and dependancies gives me:
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument rpmdb: PANIC: fatal region error detected; run recovery error: db3 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery how do I recover the installed packages database, or rebuild it?
View 3 Replies
View Related
Apr 17, 2009
I've recently removed some packages and now have a problem with fonts. how to get list of removed packages (for example, last 10)?
P.S. I'am using yum-remove-with-leaves plugin.
View 1 Replies
View Related
May 31, 2011
I'm considering rebuilding my system. Is there any way to get the list of software that I added? I know I can see the list of installed software in Ubuntu Software Center, but that list includes items that were included. Rather than going through that long list to see what was included and what I added, is there a way to see only the items I added?
View 3 Replies
View Related