Ubuntu Installation :: Boot Error "modprobe: FATAL Could Not Load /lib/modules 2.6.35-22 Generic Modules No Such File Or Directory"
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
i'm using Centos 5.3 (220.127.116.11-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/18.104.22.168-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
since the recent upgrade to Maverik every time I boot this error message appear on the top of the screen: "modprobe: Fatal: Could not load /lib/modules/2.6.35-22-generic/modules.dep: no such file or directory" fter that plymouth starts without any graphics and the first visible object is the login interface (GDM)
I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/22.214.171.124-0.1-desktop/build: No such file or directory. Stop. make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-126.96.36.199-0.1-desktop /lib/modules/188.8.131.52-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls184.108.40.206-0.1-debug 220.127.116.11-0.1-desktop 18.104.22.168-0.1-desktop22.214.171.124-0.1-default 126.96.36.199-0.1-xen
I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/188.8.131.52-smp kernel modules tree found for kernel "184.108.40.206-smp"
I tried to look into the directory and there was only modules under 220.127.116.11. So I tried to change the command into: Quote: mkinitrd -c -k 18.104.22.168 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
I get this when trying to launch a VB after making one with wizzard.
I downloaded the x86 server version for Lucid twice today. Both times before burn the md5 match those published on the Ubuntu site. I am attempting to install the system on a Dell poweredge 2500. 2x 1.4 gb P4 procs, 1 gb ram, 750 GB HDD (raid) Boot to installer. it goes through the standard language checks, keyboard, checks for cdrom, then attempts to start copying files.
It gets to 17% copy on fs-core-modules-22.214.171.124-generic-di and hangs there for 5 minutes or so. Then comes back with the error that it could not get the file and asks if I want to retry. all retries lead back to this error. As I said, MD5 is exact, burner does not complain of a bad burn, and disk is closed at the end of the burn. so, has anyone else been able to install Lucid server x86? burned four disks today, one pair on two different burners. All fail at 17% retrieving that file.
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:
init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.
Code: load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.
I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
I then went agead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
Check old driver and unload it. Build the module and install make: *** /lib/modules/2.6.32-71.el6.x86_64/build: No such file or directory. Stop.
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/126.96.36.199-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
"linux-backports-modules-nouveau-2.6.32-14-generic" is "stuck" on my laptop. It's a "Not Installed (residual config)" and when I try to I get "E:linux-backports-modules-nouveau-2.6.32-14-generic: subprocess installed post-removal script returned error exit status 1"