Ubuntu Installation :: Windows Installer Launch Error Message
Feb 1, 2011
I want to download and install Ubuntu to run alongside Windows 7 in a dual boot configuration. and downloaded the Windows Installer, but when I try to launch it I get an error message which I captured and attached to this post. What's really wierd is that once the message is displayed, I can't get rid of it. Even running the Task Manager to try to close the message doesn't work. I literally have to restart the computer to get rid of the message!
Am I suppose to be downloading the Windows Installer (Wubi) to a CD first where I run it from there? If so, the instructions don't mention that. Can't I download it directly to my C: drive and then run it from there? If so, why am I getting the error message?
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
I don't use F-spot regularly. I don't think I've used it for a few months. But when I tried to open it recently and every time since it crashes showing the following error: F-Spot Encountered a Fatal Error
Could not read add-in description.I removed F-Spot and reinstalled in Synaptic but it didn't fix anything.
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system Processor: Intel pentium IV Ram 1 GB Harddisk:- 160 gb
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
When i tried to launch 2012 installer using GUI based command , it gives the following error message :-
Error:-
It is Observerd that ( but not sure ):-
It is looking for = > ./u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs/libXm.so.4.
I tried soft linking libXm.so.3 with libXm.so.4 but it doesn't help. Also tried downloading Openmotif and installing, its asking for many dependency packages.
The following packages are also reported to be missing:-
When i try to download and run rpm on these, it gives dependency problem. And these dependencies seem to be deadlocked. I don not understand how i can go about it..
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
I have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
I use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is: <<BLACK SCREEN>> Grub loading. <<BLACK SCREEN>> underscore Ubuntu logo ubuntu login
So I don't know whats wrong. Right now my disk looks like this: MyDisk > MyDisk1 ntfs ( For windows 7 ) MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
I've noticed that a lot of laptops these days have fast web access buttons that quickly launch a linux os, or recovery buttons that seem to launch some other stripped down os.
So I was wondering, would it be possible to get these buttons to launch a normal ubuntu distribution? Have one button for ubuntu and the normal power button for windows?
That would be really sweet for dualbooters.
Or is it just technically/physically not possible?
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
I have downloaded ubuntu cd from bit torrent. Unfortunately my dvd rom is not working now. So i have decided to use windows installer. Can you give me any idea how to link this ubuntu which i have already downloaded from bit torrent?
I tried to install a pci wireless card, just to see if it was faster than my usb antenna. after trying to install the kernel, or firmware or driver, not sure which. i fallowed the instructions on the site that Terminal posted to me. Well... it didn't work. kept getting error msg's. now every time I install updates, new programs, or even uninstall something. weather it be in Terminal, synaptic, Ubuntu software centre, I keep getting firmware-b43-installer error. I'm not using the card, cause I couldn't get it to work. but how do I get rid of the error code that keeps coming up, even though I'm not trying to install it. This is what popped up in Terminal after installing Minitube.
I currently run windows 7, I am interested in dual booting, upon burning the .iso to the disc using imgburn, I had a few problems with the installer when I ran the live disc, I'll assume it was personal causes, I googled several things for a simple solution, I went with using the Disk Manager in Windows 7 to shrink my current partition which I only have one which is running Win 7 on 140 GB's, using the shrink function in windows I unallocated 20 GB of that partition, I used this option because the option in F11's installer would not work at all. I rebooted from disc, loading the distro, and run the installer via desktop choose the use free space option and I got an error crash when it tries to execute this option which isnt the only time I got this error bug causing me to exit the installer, I copied the debug information in the details, I hope this is something simple because F11 isn't worth this much time.
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
My daughter tried to create a bootable USB-stick version of ubuntu by following the steps on this site, which included using the "universal USB installer" utility from pendrivelinux.com. She was on a windows notebook (I don't know which version, probably XP), and had saved the .iso to the desktop.She's generally pretty good about following directions, but now, with no CD or USB stick in place, the windows machine HD boots directly into the installer "Try ubuntu or Install ubuntu" screen, with no trace of windows! Naturally, her SO (it's his work machine) is more than a little upset.
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
am using a PC104 with Linux and i need to control it with a controller that is connected via RS-232 or USB port. I need to launch one or more application some specific message come through RS-232 port. Is that doable? If yes how? I am beginner with C++ on Linux so i don't really know specif libraries. If possible i would like to use pure C and not C++.
I have a Samba server conecting to a windows XP machine that is in workgroup named CLOUDLESS. I have a share folder that resides in the server that can be accessed no problem by the XP client, but I got the following error message from the syslog:
Code: Apr 5 18:15:44 firefly nmbd[5656]: find_domain_master_name_query_fail: Apr 5 18:15:44 firefly nmbd[5656]: Unable to find the Domain Master Browser name CLOUDLESS<1b> for the workgroup CLOUDLESS. Apr 5 18:15:44 firefly nmbd[5656]: Unable to sync browse lists in this workgroup.
I am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
