Ubuntu Installation :: WiFi Is Not Working On A Fresh Install Of 11.04 (32bit)?

Sep 1, 2011

I just got done with a fresh install of 11.04So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101USBelow info is from doing lspci command in the terminal.Code:Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 2 Replies


ADVERTISEMENT

Ubuntu :: WiFi Not Working On Fresh Install Of 11.04 (32bit)

Sep 1, 2011

I just got done with a fresh install of 11.04. So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101US. Below info is from doing lspci command in the terminal...

Code:
Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 9 Replies View Related

Ubuntu Networking :: Wifi Was Working From Fresh Install But Would Drop Out Often And Sometimes Freeze Laptop Resulting In Hard Reset?

Apr 20, 2010

Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?

View 1 Replies View Related

Ubuntu Installation :: Fresh Install Not Working Correctly / What To Do?

Jul 2, 2010

I installed Ubuntu 10.04 from a Live CD today. Everything seemed to go fine, I chose to wipe the entire disk. However, it would only startup once. Now, when I turn on my laptop, all I get is a blank screen.

I had a look at my partitions with GParted on the Live CD and noticed that there was a 1 MiB unallocated space just before it. code...

View 7 Replies View Related

OpenSUSE Wireless :: Fresh 11.2 Install - Wifi And Dhcp?

Dec 23, 2009

I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.

ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -

[Code]...

View 9 Replies View Related

Fedora Networking :: Broadcom BCM4310 - No Wifi After Fresh Install

Jun 27, 2009

I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:

kmod-wl
broadcom-wl
ndiswrapper

I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.

View 3 Replies View Related

Debian Hardware :: Fresh Jessie Install - Machine Doesn't Boot With PCIe WiFi

May 4, 2015

I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.

I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.

WiFi card: [URL] ....
motherboard: [URL] .....

View 1 Replies View Related

Ubuntu :: Fresh Install Not Working Correctly

Mar 19, 2010

I just built my PC and loaded ubuntu on it. When the ubuntu desktop comes up everything looks ok. but when I click on any of the drop down menus, or anything else for that matter, the computer freezes immediately. I,ve tried copying the iso boot file to a new cd and reloading ubuntu but the problem remains. I've also tried removing one of the two ram sticks but again, the problem remains.

PC specs:
Intel dh55hc board
Intel i3 cpu 3ghz
2 Corsair 2gb RAM sticks
750 western digital HD
Sony lightscribe DVD drive

View 9 Replies View Related

Ubuntu Networking :: Lan Not Working On Fresh Install

Oct 30, 2010

I just installed ubuntu 10 on my pc and unfortunatly I don't have internet. I only have one pc wired to my 2wire modem. I want to use dhcp, no static ip if possible.

View 5 Replies View Related

Ubuntu :: 10.10 Fresh Install - Sudo Not Working

Jun 17, 2011

Just did a fresh install of Ubuntu 10.10 sudo not working. This is the message I get.

hewjr@Hewjr:~$ sudo
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u username|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] [-g groupname|#gid] [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] file ...
hewjr@Hewjr:~$

View 8 Replies View Related

Ubuntu Multimedia :: Sound Not Working After Fresh Install?

Dec 25, 2010

I just installed lubuntu 10.04 on an old machine and cant get the sound to work. I have been through the sticky but cant seem to see the problem. Heres the useful output:

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Wireless And Ethernet Not Working After Fresh Install Of 9.1?

Sep 16, 2010

I just installed 9.10 to a dell inspiron 531s and neither the ethernet nor the wireless will find a signal. The results of sudo lshw -c network are

*-network
product: BCM4318 [AirForce One 54g] 802.11g wireless LAN controller
vendor: Broadcom Corporation

[code]...

View 1 Replies View Related

Ubuntu Networking :: Wired Internet Not Working On Fresh Install 10.10?

May 13, 2011

i have a dual boot system with xp and ubuntu 10.10 (which i recently installed). The internet works fine on my xp but on ubunutu it did not work.

i tried few things, like changing the proxy setting in mozilla firefox etc, but i did not work

i am attaching snapshot of ifconfig, resolve.conf and route-a commands for your referral

View 9 Replies View Related

Ubuntu Networking :: After A Fresh 11.04 Install DHCP Server Not Working?

Aug 1, 2011

After a fresh install of Ubuntu 11.04 (from 10.04) and spending several hours trying to figure out why the ad-hoc connection between my two computers (Fedora14 <-> Ubuntu 11.04) no longer worked - it had worked fine for almost 2 years with 10.04 - I've finally concluded it was a DHCP problem. This realisation (which was slow in coming!) dawned on me when I reversed my setup and configured the Fedora box as the DHCP server and everything was suddenly working perfectly! A quick internet search threw up an installation file called "isc-dhcp-server" which other Ubuntu 11.04 - related forums are also complaining about. My problem is that this file, although available in the repository, is not even installed!!!

It seems unlikely that the developers forgot to include DHCP support, so I hope someone can point me in the right direction.

View 1 Replies View Related

Ubuntu :: Sudo Or User Login Not Working - Fresh Install?

Aug 17, 2011

I have this weird problem after a fresh install of Ubuntu 11.04: I can enter desktop using autologin but if i open a terminal i cant run anything as superuser ried:

sudo -i
sudo su
sudo <command>
gksudo <command>

i get somthing like: error, invalid password etc etc 3 incorrect login attemtps Also if i ALT+F2 or close gnome session i cannot login back with my username, same error notes: 1. the password is right, i did a second install of ubuntu to make sure it was not my mistake 2. groups seems ok, user is in admin groups 3. I have a similar error, same computer but on an old installation that i ve updated since ubuntu 9.04 to 10.04, then 11.04 but. But here if i try the password a couple of times then i get it working.

View 4 Replies View Related

Ubuntu Networking :: No Wifi After Update 8/01/2010 9.10 32bit?

Jan 8, 2010

after the automatic update this morning and restart I could no longer connect to wifi. The router is visible, along with all the others, but when it tries to connect to it, it doesn't succeed.

This is what have been instaled: Commit Log for Fri Jan 8 10:58:42 2010

[Code]...

View 9 Replies View Related

Fedora Networking :: BCM4312 Not Working Under F11 With Fresh Install

Jun 12, 2009

Just tried new Fedora 11 yesterday, did a fresh install with ext3 /boot and ext4 file system, booting looks great, but wireless doesn't work. I have tried using broadcom-wl, dnmouse script, dnmouse broadcom f11 rpm, fwcutter but not ndiswrapper

Code:
# rpm -qa | grep broadcom
broadcom-wl-5.10.79.10-2.fc11.noarch

Code:
# lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)

Code:
# lspci -vvv | grep 4312
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN Controller
ifconfig only shows eth0, lo and pan0 interfaces, and got nothing from iwconfig...

Code:
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.

Even tried to blacklist b43 after installing broadcom-wl driver, but no luck. Broadcom-wl works fine with Fedora 10 on my laptop, is it possibly because of the new ext4 file system? Should I try ndiswrapper or install Fedora 10 again and do a preupgrade? I also use fedora at work.

View 14 Replies View Related

OpenSUSE Wireless :: BCM 4322 On Fresh 11.2 Install, Not Working?

Nov 13, 2009

Newbie here, but I'll attempt to display all the information requested in lwfinger's sticky:

/sbin/lspci yields:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN

[code]...

View 9 Replies View Related

Ubuntu Networking :: 10.10 Fresh Install - Wired Network Not Working Properly

Oct 24, 2010

I did a fresh install of Ubuntu 10.10, coming from 10.04 and the wired network connection sometimes works, and sometimes doesn't. Right now I manually removed current network from System-->Preferences--> network connections, define a new one, and reboot. This usually fixes, although I've had to do this two times in the past.

Other general info
Ubuntu 10.10 64bit, EVGA P55 motherboard, on board either net.

View 1 Replies View Related

Ubuntu Networking :: Network Card Working On 10.04 32bit But Not Working On 10.04 64bit!

Jul 25, 2011

I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"

lspci output:

Quote:

02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)

How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?

View 3 Replies View Related

Debian Configuration :: 8.0 With GNOME 32bit - WiFi Connection With WPA2

Apr 12, 2016

I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.

If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.

I. using my phone Android to create the Router-Wifi like this:

SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK

With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.

I tried to connect manually and i updated the file /etc/network/interfaces as the follow:

Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]

After this I tried to execute the follow command :

Code: Select all/etc/init.d/networking restart

And the system returns:

Code: Select all[  ok  ] Restarting networking (via systemctl): networking.service

but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.

View 3 Replies View Related

Ubuntu Multimedia :: Gateway NV57H26u - Sounds Drivers Not Working Properly After Fresh Install Of Natty

Sep 1, 2011

Sounds drivers not working properly after fresh install of Natty.

View 3 Replies View Related

Debian Installation :: Safe To Install Dual Boot Windows 32bit

Jan 28, 2011

is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?

View 14 Replies View Related

Fedora Installation :: Take The 686MB 32bit Iso Image And Put It On A 2GB Usb Drive And Boot / Install?

Feb 5, 2011

i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!

OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"

I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!

Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!

Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.

View 6 Replies View Related

Ubuntu Installation :: Should Rather Do Fresh Install Of 10.04 ?

May 29, 2010

I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.

I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better

View 7 Replies View Related

Ubuntu Installation :: Fresh Install Without USB Or CD?

Oct 5, 2010

I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.

The HD partitions are
/dev/sda1 (ext4) 15gb mounted as /
/dev/sda2 (extended)
/dev/sda5 (linux-swap) 2gb
/deb/sda6 (ext4) 20gb mounted as /home

How can I do a fresh install??

View 1 Replies View Related

Ubuntu Installation :: Fresh Install 10.04 Not Starting?

May 26, 2010

I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...

View 9 Replies View Related

Ubuntu Installation :: 10.04 - No Grub After Fresh Install

Jun 8, 2010

I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.

As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.

View 9 Replies View Related

Ubuntu Installation :: Upgraded To 10.04 With Fresh Install?

Oct 2, 2010

I want to use my old home partition as home whereas currently there is a 35gb partition that was my old home and a new 'home' within /. how to make my old home recognised by my new install of Lucid.

View 1 Replies View Related

Ubuntu Installation :: Can't Get Fresh Install Of 11.04 Work

Apr 30, 2011

I trying to dual boot Ubuntu/Windows 7 on my computer. Here is my problem:

Info:
I used Wubi and ubuntu-11.04-desktop-amd64.iso.
Main OS: Windows 7 Pro 64bit
Videocard: Nvidia GT 240

Problems (underlined) as they occured:

1) Installed Ubuntu within Windows, rebooted, saw Ubuntu loading screen (with dots) and then I get graphics corruption (it's really bad I can't recognize anything in the screen).

Then I booted in recovery/failsafe graphic mode and I let the installation finish, then automatically rebooted.

2) Let it boot without pressing anything and instead of graphic corruption it boots in terminal.

Tried startx command but it says something relative to "x not found". Then I found out I had to install proprietary Nvidia drivers so I:

3) Booted again in failsafe graphic mode (in recovery mode) and tried to install it but... no internet connection.

I tried "sudo ifconfig eth0 up" and I got: eth0: ERROR while getting interface flags: No such device

NOTE: If I let it boot itself (terminal) I HAVE internet connection (found out with wget and ping commands).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved