Ubuntu Installation :: Upgrade From 10.10 To 11.04 Error "written Fail At Stopping Automatic Crash Report Generation"

Apr 28, 2011

Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot

but it doesn't do it properly.

View 8 Replies


Ubuntu :: 10.04 - Stopping Automatic Crash Report Generation (Fail)

Jul 21, 2011

Recently installed Ubuntu 10.04 (I think) on my laptop as a dual boot with windows. Now, whenever I start my computer, the grub menu boots and I choose to run the generic ubuntu.

However, I get the message:
Stopping Automatic Crash Report Generation [FAIL]

And the screen freezes at that. No further progress is made and I have to restart my computer. The only way I can run ubuntu is by running it in safe mode with low graphics.

View 5 Replies View Related

Ubuntu :: Automatic Crash Report Generation - Fail

May 1, 2011

I'm a satisfied user of ubuntu 11.04 64bit (installed on a laptop). Everything works fine (unity, sound etc) no problems at all except that when I shutdown my computer on of the services is marked as FAIL.

In a boot log I found:
* Stopping automatic crash report generation[74G[[31mfail[39;49m]
Ok updating, nothing serious, can be ignored or uninstalled.

View 9 Replies View Related

Software :: Automatic Report Generation By LogAnalyzer

Oct 14, 2010

I am running LogAnalyzer 3.0 on one of our servers, and I wanted to know if anyone knows of a way it can be configured to generate reports that can be exported and e-mailed to the System Administrator?

View 1 Replies View Related

Ubuntu Installation :: "encountered An Unrecoverable Error" / Getting A 'Crash Report' Notification On Panel?

May 23, 2010

I was intending to do a clean install of 10.04.I have downloaded and burned desktop-i386.iso.After booting from CD and selecting install from the menu, I get the splash screen for a few minutes, then black screen, then purple ubuntu screen, then the error message "the installer has encountered an unrecoverable error. A desktop session will now be run etc.....".

I am thinking this may be related to ACPI, because when i 'Try Ubuntu without installing' it loads ok but I get a 'Crash Report' notification on the panel.

If again 'Try Ubuntu without installing' with F6 option "ACPI=Off" it loads up with no problem.

Another thing I noticed is that when I load with ACPI=OFF, my external drives automount, but if i dont turn ACPI off, and get the Crash report notification the external drives do not automount.

View 3 Replies View Related

Software :: Firefox And Wine Silently Fail To Open - Where Do Find An Error Report

Jul 30, 2009

Firefox 3.1 beta 3 won't load. When I open the application, the little bouncy icon bounces, and the task manager shows "Firefox Web Browser", but this only stays this way for about 15 seconds then just goes away. No error or anything.

I've had this identical problem when I try to open certain programs with Wine too. Is there some place I can find a detailed error report on these failures?

View 7 Replies View Related

Server :: Stopping Automatic Disc Check In Debian?

Sep 7, 2010

Whenever my debian based server is rebooted 35 times it does an automatic disc check. When it does this and completes the disc check it doesn't properly establish network comms and I can't get in using SSH and I can't even ping the server.If I reboot again, it operates as normal but the problem is that the server is remote to me and I need to travel to the site when this occurs.

View 6 Replies View Related

Ubuntu Installation :: Software Centre Is Not Working / "Crash Report Detected" Keeps Popping Up?

Jan 1, 2010

Hi everyone,

Encountering several problems with ubuntu. I have managed to burn iso to cd - I decided to bot ubuntu off the cd, I have been struggling with a couple of problems all to no avail. I have heard ubuntu is pretty damn good, and I was quite enthusiastic about it. But if I can't get this sorted...

Oh I should also say I have never used a command line and I have not a clue about xorg or whatever you call it.

anyway my first problem is Display settings. I can go to System > Preferences > Display, and the largest I can set my resolution to is 800*640 and the monitor is unknown...?

Problem number 2 - the ubuntu software centre is not working... Applications > USC > Could not launch Ubuntu Software Centre..

Problem 3 - In the bar at the top of the screen beside time and date etc, "Crash report detected" keeps popping up?

Problem 4 my @ and " keys have swapped places??? also my Pounds sign (I live in UK) has been replaced with # while # has been replaced with

I have been working for a couple of hours on it but nothing makes the slightest bit of difference. I will probably have some more problems soon to be honest - but your help with the above problems would be honestly fantastic.

edit: Yea I cant install flash player to watch videos on .....?

Applications > Acessories > Terminal will not bring anything up anyway!

Open office does not work

Niether does gnometris - but robots does lol

View 9 Replies View Related

Ubuntu :: Panel Weather Report Fail To Display

Mar 13, 2010

Has anyone else seen panel weather report fail to display anything rightly beside the current date? Stuck on incorrect date as well...

View 8 Replies View Related

Ubuntu :: Upgrade From 10.10 To 11.04 Fail - Error Window Appear ?

Jun 11, 2011

I have problem when I try to upgrade my Ubuntu 10.10 to 11.04 using Internet the upgrade start then this Error window appear.

The error is :

View 4 Replies View Related

Debian Installation :: Apt-get Upgrade Report 0 Held Back

Mar 3, 2015

Running Debian Stable AMD-64

Attempting to install valgrind from Synaptic Package Manager, I get a set of error messages: Packages held back? Broken? etc.

apt-get update; apt-get upgrade report 0 packages held back.

Synaptic Package Manager, clicking on "broken" lists no broken packages.

View 14 Replies View Related

Fedora Security :: Setting Up A Webserver And SElinux Keeps Stopping Httpd / Appache And Making It Fail

Jul 12, 2010

I am setting up a web server and SElinux keeps stopping httpd/appache and making it fail. Everything works fine when SElinux is set to permisive, so I know it is SElinux causing the problem. I have all the apache/httpd items allowed in the SElinux bool and even added the line the troubleshooter told me to add but the problem still persists. Here is what SElinux puts out:


several times and it does nothing. I have all the permissions set to Apache as owner and group and allow execution on all the files.

View 1 Replies View Related

Ubuntu Installation :: Can Not Calculate Upgrade / 'report This Bug Agains Update-manager Package'?

Dec 6, 2010

I keep getting this message while I try to run updates. The Update Manager says I have 35MB to install but it doesn't do it. Can anyone tell me what the problem is and how to maybe fix it? Also, how do I 'report this bug against the update-manager package'?

View 3 Replies View Related

Fedora :: 13 On Laptop Compiz Crash Report

Oct 28, 2010

just installed Fedora 13 on a pentium 4 laptop by Dell, with 1 Gb RAM.

As I opt for Compiz, it cannot start, there is a black pop up saying Crash, and some numbers follow. How can this be fixed?

Should I install KDE?

Is there an update of software?

I can opt for Compiz but worry that it will be faulty. That is the second attempt also produced the crash warning pop up but gave me the option of keeping it or going back after about twenty seconds, with the figures on the screen. I played it safe. Also can I try it, and manually go back?

Error report shows Compiz killed by Signal 11 SIGSEGV, this was added after post 9.

View 13 Replies View Related

Ubuntu Multimedia :: View A Adobe Flash Crash Report?

Aug 24, 2011

im needing to view a adobe flash crash report, or preferably watch the crash happen(in the code)

Ubuntu 11.04(up to date)
flash plugin - v11,0,1,98
flash aid - adobe beta, from adobe labs
Firefox - 6.0(according to the "about firefox")

i have installed and reinstalled both the flash player and flash aid is there a way to do this and how?the player works on some sites and not others is it possible that im up to date and there not?

View 5 Replies View Related

Ubuntu Installation :: Installation Of JRE Failed-error Report?

Aug 4, 2010

I tried to install JRE 6 After adding partner repository I wanted the updates by this command sudo apt-get updateI got the following errorE: Malformed line 54 in source list etc/apt/source.list (dist parse)what does it mean and how to rectify.

View 1 Replies View Related

Ubuntu Installation :: Automatic Upgrade To 11.04 Fails?

May 1, 2011

The Update Manager has tried to upgrade me to version 11 three times now, and fails each time.

First I get a warning, that probably isn't important: "Third party sources disabled

Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager."

After the upgrade I get this:

"Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a).

Upgrade complete The upgrade has completed but there were errors during the upgrade process."

The console has about six messages similar to this, all complaining about the vnc-e package:

"warning, in file '/var/lib/dpkg/available' near line 10992 package 'vnc-e': error in Version string '4.4.3_r16583': invalid character in version number"

View 5 Replies View Related

Fedora Installation :: F15 Upgrade - Cold Boot Error "Your System Last Boot Fail Or Post Interrupted Please Enter Setup To Load Default And Reboot"

Jun 30, 2011

I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.

View 12 Replies View Related

Ubuntu Installation :: Upgrade 10.04 To 10.10 Fail?

Oct 23, 2010

I tried to do a upgrade-manager -p ( or maybe -d , I forget ) and at the end it said the upgraded failed and my os was in a broke state. What can I check or do to complete the upgrade?

View 1 Replies View Related

Ubuntu Installation :: Upgrade From 10.10 To 11.04 Fail

Apr 28, 2011

Fail the upgrading...
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.

This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.

View 9 Replies View Related

Ubuntu Installation :: 10.4 Upgrade Causes Eclipse To Fail?

Apr 30, 2010

After upgrading to 10.4, Eclipse started showing the the following error:

Failed to load JavaHL Library.
These are the errors that were encountered:
no libsvnjavahl-1 in java.library.path
no svnjavahl-1 in java.library.path
no svnjavahl in java.library.path
java.library.path = /usr/lib/jvm/java-6-sun-

Synaptic shows libsvn-java as installed.

View 1 Replies View Related

Ubuntu Installation :: Certain Programs Fail To Run After Upgrade?

May 3, 2010

I have a laptop running Ubuntu 10.04 and also two dual boot desktop machines, both running Windows XP and Ubuntu. I have upgraded one of the desktops to Ubuntu 10.04 and since doing so Thunderbird will not run on the laptop or the desktop. On clicking the launcher there are signs of activity for a few seconds and then they stop and Thunderbird fails to open. Also there is no longer any sound on the desktop that I have upgraded. I am reluctant now to upgrade the remaining desktop in case I have the same problems

how to get Thunderbird running again, please. I have already spent a week unsuccessfully trying to get the sound working and have abandoned it, but I would like Thunderbird to start running again.

View 1 Replies View Related

Ubuntu Installation :: Online Upgrade From 10.10 To 11.04 - Fail

May 1, 2011

I was a little worried about doing an upgrade, via Update Manager, from 10.10 to 11.04.

I was right to be worried.

Boot hangs and booting in verbose mode, grub does come up, but going into the main latest kernel version shows;

VFS: Cannot open root device "sda1" or unknown block.

Please append a correct "root=" boot option; here are the available partitions

0b00 1648575 sr0 driver sr

May have missed some of the text as wrote it down.

sda1 was my original and only partition.

Have used my 10.10 live cd and file structure and files are all there,

Took the opportunity to shrink the single main partion and create primary partitions for /home and another for all the junk I accumulate. sda1 will still be my boot partition.

In the process of making a 11.04 boot CD.

View 4 Replies View Related

Ubuntu :: Administration Functions And Automatic Update Fail To Work?

Mar 27, 2010

I am using Ubuntu 8.04. Most of my Administration functions have stopped working. If I click on Hardware Drivers, Hardware Testing, Log In Window, Software Sources, Synaptic Package Manager, and Windows Wireless Drivers my pointer turns into the timer wheel, so I know it is working, but then it just disappears and nothing happens. When I click on Update Manager my computer freezes. If I try to update through the red Updates Available arrow at the top of my screen my computer freezes. I can update through terminal but the red arrow never goes away. I also have 17 updates that won't update. I have tried them one at a time through terminal but they just freeze the computer. The only way to unfreeze it is to shut the computer down.

View 4 Replies View Related

Fedora Installation :: Upgrade F12 To F14 FAIL ?

Nov 16, 2010

I'm using Fedora 12 and today i was trying to upgrade it on F14 ...I download DVD from fedora site burn it on disc and start Upgrade...On start i get error that findutils is corrupted and i need to abort instalation... I think ok maybe disc is not good burned.. i Burn one more disc i test it its ok ... buti get same problem...Ok i try "Preupgrade" software.... he download all i reboot system, upgrade is start ...and... same problem finutils is coruppted... So now i cant upgrade F12 to F14 version...Icons are changed, for system version is F14... some data is changed to F14 some is still F12 + i lost Audio card so i don have sound :S

What can make me problem or how to solve?
In upgrade.log in /root/ i have one line Upgrading findutils-4.5.9-2.fc14.x86_64

View 9 Replies View Related

Ubuntu Installation :: Power Fail During Upgrade / Resolve This?

May 3, 2010

The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.

The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.

Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.

View 5 Replies View Related

Ubuntu Installation :: Upgrade / Removal Of Software To Fail In 10.04

May 27, 2010

I need to determine which package is causing every upgrade installation or removal of software to fail in Ubuntu 10.04 I have had a problem since allowing some non-supported upgrades (not certain what they were for) in 9.10 (FAIL!) I hoped that upgrade to 10.04 would resolve the issue (I know FAIL again!). I am guessing I can;

a) Remove the offending package
b) Repair the missing/damaged 10.04 files
c) replace the 10.04 OS

I am running a dual boot one drive system with XP and Ubuntu each in their own partition and a 3rd partition where data resides

View 9 Replies View Related

Ubuntu Installation :: Fail To Upgrade Qbittorrent And Now Cannot Reinstall It?

Apr 28, 2011

I wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?

And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.

So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.

I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.

View 1 Replies View Related

Ubuntu Installation :: GRUB2 / RAID 10.10 To 11.04 Upgrade Fail

Apr 30, 2011

GRUB2 / RAID 10.10 to 11.04 Upgrade Fail.....

View 9 Replies View Related

Ubuntu Installation :: Will The 11.04 Automatic Upgrade Change Existing User Settings

May 27, 2011

However, the option to upgrade to 11.04 has recently become available in the Update Manager.

If I choose to follow this upgrade path, will my existing user settings such as nautilus shortcuts, wallpaper and other personalised settings be changed or reverted to default in any way?

Or will the upgrade execute, and leave everything looking and working exactly the same?

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved