Ubuntu Installation :: Unable To Download 3rd Party Repositories After Upgrade To Natty

Apr 18, 2011

i've just upgraded to Natty, and there are lots of 3rd party software sources that were disabled during the upgrade, and i've enabled them again. But then when i try to refresh my update cache, they fail to download. these are the list of software sources that fail to download:

W:Failed to fetch http://linux.dropbox.com/ubuntu/dist...amd64/Packages 404 Not Found
, W:Failed to fetch http://download.virtualbox.org/virtu...amd64/Packages 404 Not found
, W:Failed to fetch http://ppa.launchpad.net/alecive/ant...source/Sources 404 Not Found


and now most of these softwares appear in my 'computer janitor' to be removed (which obviously i wouldn't want that..

View 1 Replies


Software :: Third Party Yum Repositories - Upgrade Php Version To 5.2.x In Fedora 5

Oct 27, 2010

I need to upgrade php-5.1.6 to 5.2.x on my fedora 5. I tried using yum and not getting proper packages. Is there any third party yum repositories for upgrading PHP in fedora 5?

View 2 Replies View Related

Ubuntu Installation :: Natty Upgrade - Failed To Fetch Repositories

May 7, 2011

I upgraded to natty on release day and everything went fine, but about three days ago when I went to update my sources, I get this:
sudo apt-get update
W: Failed to fetch [URL] Sources 404 Not Found
W: Failed to fetch [URL] Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.

I've looked through the forums, but similar problems are always tied to the mozilla repo, not this one. It seems important, so I'm not sure if I should just delete it or what. My sources.list looks like this:
# deb cdrom:[Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
# See [URL] for how to upgrade to newer versions of the distribution.
deb [URL] natty main restricted
deb-src [URL] natty main restricted
## Major bug fix updates produced after the final release of the distribution .....

View 9 Replies View Related

OpenSUSE :: WARNING - Unable To Download List Of Repositories Or No Repositories Defined

Feb 9, 2011

I am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.

View 2 Replies View Related

Ubuntu Installation :: Apt-get Update Is Ignoring 3rd Party Repositories?

Aug 10, 2010

Something weird happening today with a new 10.04 LTS server install.apt-get update is ignoring 3rd party repositories

xbmc@xbmc-HTPC:~$ sudo add-apt-repository ppa:team-xbmc-svn
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv A292248FCB9CFB8689A30B7A2BBD133164234534
gpg: requesting key 64234534 from hkp server keyserver.ubuntu.com


I just tried adding the same repository to my desktop pc as well separate install separate machine same error, while checking software sources in gnome nothing seems out of the ordinary. My desktop was updated today via the update manager.

View 4 Replies View Related

OpenSUSE :: Error - "Unable To Download List Of Repositories Or No Repositories Defined"

Jan 30, 2011

I am running Suse 11.1.I do the following:

Click on Software Repositories
Click Add
Click Community Repositories
Click Next.

I receive an error, "Unable to download list of Repositories or no repositories defined."

in the /etc/YaST2/control.xml the external repository is:download.opensuse.org/YaST/Repos/openSUSE_111_Servers.xml

View 9 Replies View Related

Ubuntu Installation :: Unable To Upgrade To Natty 11.04

May 9, 2011

I tried to upgrade to 11.04 from 10.10 but I get this error every time.

View 4 Replies View Related

Red Hat :: Add 3rd Party Repositories To YUM?

Apr 21, 2009

I normally add RPMFORGE / DAG to my RHEL 5 machines however I have a server and I can't remember if I added the repository to the machine so I was wondering how someone can check on the server if I have added this in the past. I know that in Debian / Ubuntu, I am able to cat /etc/apt/source.list and see the repository listed.

View 1 Replies View Related

OpenSUSE :: Unable To Download Repositories / Solve It?

Aug 20, 2010

Just reinstalled kde 11.3 on second hd. Everything seems to be okay except for getting additional repositories. Under yast I get the message unable to download list of repositories or no repositories defined. Any ideas on what I can check?

View 9 Replies View Related

Ubuntu Installation :: Updating The Repositories To Natty (11.04)

Aug 14, 2011

After my system was updated to Natty, even though Software Sources is set for LTS updates only, none of the repositories in Software Sources or /etc/apt/sources.list.d were updated. I have manually updated the Software Sources repositories, and removed the outdated repositories from /etc/apt/sources.list.d, but when I do apt-get update I still see references to previous Ubuntu versions. How do I update ALL the repositories?

View 9 Replies View Related

OpenSUSE Install :: Unable To Download List Of Repositories

Apr 29, 2011

After testing Opensuse 11.4 since it was released, I decided to go back to version 11.3. After installing 11.3 I find I cannot add the community repositories, such as Nvidia, Packman, etc. It attempts to download the repository list but gives the following error message : Unable to download list of repositories or no repositories defined. I've used this DVD before and it installed perfectly. I then tried installing 11.3 from a network cd but got the same error when trying to add a repository. At this point I don't know what to do. Joe

View 3 Replies View Related

General :: Adding Third Party Repositories In CentOS?

May 20, 2010

how to add third party repository in CentOS?

View 2 Replies View Related

Ubuntu Installation :: Upgrade To 10.04 Says 'Unable To Download Release Noted'

Apr 29, 2010

I've ensured that all current 9.10 updates have been installed, then tried to upgrade to 10.04.The message "Unable to download release notes - please check your internet connection" appears.Clearly my internet connection is working.I have had problems with Network Manager in the past (it is less problematic recently - see bug #481432 for details).If so, how do I get the upgrade started?

View 6 Replies View Related

Debian Installation :: Can't Download Files From Any Repositories / Sort It?

Apr 29, 2011

I am still having trouble installing Debian 6.0.1a (Squeeze) from either CD #1 (KDE version) or netinst version. I tried for a few months to install Squeeze with KDE desktop; now I am trying to build a server, which seems easier (no X.org and KDE problems to worry about.)

Part of the problem common to all my failed attempts (about a dozen!) seems to be that the installer tries to get packages or updates/upgrades from repos but for some reason fails.

I have a commercial all-in-one dslmodem/router/firewall which has very, very limited monitoring capabalities, just enough to show that the PC in question contacted the expected repos (I tried several in different regions) and also shows that no DNS requests failed during that time frame. I did try decreasing the security of the commercial firewall, but that seems to make no difference. I did try to save the install logs, but they didn't fit on a floppy. Any idea what could be going wrong?

View 5 Replies View Related

Fedora Installation :: Still 14 Repositories After Upgrade To F15?

May 27, 2011

I upgrade to F15 yesterday using preupgrade. Everything was OK but there's something wrong with repositories. They release version seems to be "14". I tried to fix it by using:

yum --releasever=15 --skip-broken distribution-synchronization
But everything nothing changed, this is the output of yum repolist":
Complementos cargados:langpacks, presto, refresh-packagekit


View 9 Replies View Related

Ubuntu :: Natty Download Speeds - Takes 20 Minutes To Download Language Packs

Apr 28, 2011

I just installed 11.04, and the software center is almost unusable. I'm currently clocking about 32kb/s on my modern laptop. Does anyone know how to fix this? PS- During install, it took 20 minutes to download the language packs, and it said I would be there close to forever for the update downloads.

View 8 Replies View Related

Ubuntu Installation :: How To Upgrade To Natty From 10.10

Apr 5, 2011

When i upgraded the whole process went all right then when I logged in, i mostly saw black and no unity bar could barley get around.

View 2 Replies View Related

Ubuntu Installation :: Can't Upgrade To Natty?

May 4, 2011

When I try to upgrade from 10.04 to 11.04 I always get this error:

Code: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
If I run sudo apt-get dist-upgrade, I get:

~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando rbol de dependencias


Apparently there's nothing wrong in apt.log, but i cannot upgrade and i don't know how to fix it. Any clue?

View 2 Replies View Related

Ubuntu Installation :: Upgrade 10.04 Failed: Couldn't Download The Upgrade?

May 16, 2010

I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 80]I tried to change from main server to US server, but I still get this error.

View 1 Replies View Related

Ubuntu Installation :: Upgrade To Natty : OS Does Not Load?

May 4, 2011

I have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?

View 1 Replies View Related

Ubuntu Installation :: Xorg CPU Hog After Upgrade To Natty?

May 17, 2011

I've just upgraded my Mythbuntu box to Natty. Now I have a completely unusable system due to Xorg taking 70% of CPU. Mouse movement is possible and I can just type but that is about it. Using MythTv is impossible.I'm running a standard mythtv build with the xfce desktop how to fix this one as it has rendered my PVR system impotent.

View 4 Replies View Related

Debian :: Unable To Download All The Update In One Go And To Complete The Upgrade?

Jul 16, 2010

My internet connectivity is not that fast. Since I am using Squeeze, there will be very frequent updates.

My problem is that I am not able to download all the update in one go and to complete the upgrade. As the number of files to be downloaded and upgraded increases, I can't seem to be able to reach the end point to complete any update.

Can aptitude upgrade just the files that have been downloaded so far, and resume downloading the rest in the next attempt? MS Windows will update the OS with whatever patches downloaded without waiting for the rest if I prematurely shutdown the pc.

View 5 Replies View Related

Ubuntu Installation :: Error: Upgrade From 10.10 Maverick To 11.04 Natty?

Feb 1, 2011

I browsed on internet to find how to upgrade to 11.04 and find the answer.Press Alt+F2 and enter the command update-manager -dAfter authentication, the manager showed the updates and at some point of time, I got the following error.

E: Encountered a section with no Package: header
E: Problem with MergeList


View 1 Replies View Related

Ubuntu Installation :: (some) Colors Shifted After Natty Upgrade?

Apr 29, 2011

I just upgraded to Natty and some images display shifted colors, e.g. bright purple instead of yellow and bright green instead of whatever there used to be. Some images also show properly. I attached a screenshot of a bit of Thunderbird where the bug is visible. Does anyone have any idea what is wrong, or how to diagnose the problem properly? EDIT: and, to make this even more interesting, the attachment I made to the forum displays even more ridiculously once it has been attached - I'm attaching a screenshot of that, too. (although right now I have no idea what it looks like on a working machine)

EDIT2: To reiterate the problem: apparently, Firefox and Thunderbird rotate colors in indexed images for some reason. I am trying to find a way to fix this, with no luck so far.

View 6 Replies View Related

Ubuntu Installation :: Wireless Broken After Upgrade To 11.04 (Natty)?

Apr 30, 2011

After upgrading my laptop from 10.10 to 11.04 I can no longer connect to my home wi-fi. It was working flawlessly for months before the upgrade. The network manager just keeps spinning and nothing happens.dmesg output just keeps showing this over & over again:

[ 1721.748149] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1721.820199] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1721.820204] ipw2200: Copyright(c) 2003-2006 Intel Corporation


View 4 Replies View Related

Ubuntu Installation :: No Grub Menu After Natty Upgrade

May 4, 2011

I upgraded to Natty yesterday and my system boots into it ok but I don't get a grub menu (and so no other options like recovery mode which I really need right now). I tried purging grub and re-installing it on /dev/sda but still no joy. Here's the info from the Boot Info Script. I've also tried uncommenting GRUB_GFXMODE=640x480 in /etc/default/grub but that doesn't help. How I can get the menu back?

Boot Info Script 0.56 from 8 February 2011
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb .....

Devices which don't seem to have a corresponding hard drive: sdc
StdErr Messages:
unlzma: Decoder error
unlzma: Decoder error

View 4 Replies View Related

Ubuntu Installation :: Natty Upgrade - LVM Grub (No Such Disk)

May 5, 2011

I've had this problem on a couple of Ubuntu server upgrades and am keen to get to the bottom of it. Basically, with an Ubuntu 10.10 server installtion where LVM has been used, running through the do-release-upgrade process works perfectly until the reboot stage. Then grub complains with "no such disk" and dumps me out to the grub shell. From here, I can see (from ls) the following:

(hostname-swap_1) (hostname-root) (hd0) (hd0,5) (hd0,1) (fd0)
I can enumerate the filesystem on (hd0,1) which seems to contain the /boot filesystem and the filesystem on (hostname-root) seems to contain the / filesystem.

If I execute:
linux=(hd0,1)/vmlinuz-image-2.6.38-8-server root=(hostname-root)
It boots, but into busybox saying that the target filesystem doesn't have requested /sbin/init.

View 1 Replies View Related

Ubuntu Installation :: Initramfs-tools After Upgrade To Natty?

May 11, 2011

When I upgraded my 64bit System76 machine to Natty, I received an error message that initramfs-tools had failed to be upgraded properly. Nonetheless, when I restarted everything seemed to work as it was supposed to.However, every time I do an update the problem with initramfs-tools recurs. I get the following error message:

Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic
Syntax error at or above line 20 in file '/etc/lilo.conf'


View 5 Replies View Related

Ubuntu Installation :: Smooth Upgrade To Natty With Only 1 Hitch?

Jun 27, 2011

Successfully upgraded to 11.04 over the weekend, and all seems to be working well. The only issue I've got is with the grub menu. I used to be able to run:

sudo gedit /etc/default/grub
followed by:
sudo update-grub

after kernel updates, in order to change the default OS to boot (I've been dual-booting Ubuntu and xp for several years now).

View 2 Replies View Related

Fedora Installation :: Unable To Add Firefox Due To Repositories Not Found After Install?

Jun 25, 2009

After install I tried to add firefox but it wasn't found in any of the repositories. I thought it was supposed to be in there. Thunderbird also wasn't. What repositories do you guys add after install?

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved