Ubuntu Installation :: Not Able To Boot After Installing NVidia Driver

Apr 3, 2011

I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.

Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....

View 5 Replies


ADVERTISEMENT

OpenSUSE Install :: No Boot Image After Installing Nvidia Proprietary Driver In 11.3

Jul 21, 2010

since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?

View 5 Replies View Related

OpenSUSE Install :: [11.3] Boot Splash Disappeared After Installing Nvidia Driver?

Jul 21, 2010

I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).

View 6 Replies View Related

Ubuntu Installation :: Internet Disconnection After Installing Nvidia Driver

Jul 6, 2010

last night i have fresh installed ubuntu 10.4 on my computer. Then after that, I installed the updates. Lastly, i installed nvidia hardware driver so that i could use its graphical effects. After rebooting my computer, i've noticed that i was disconnected from the internet. And I was surprised that it is the cause of my internet disconnection because when i remove it, my internet comes back. What should I do with this?

View 7 Replies View Related

Ubuntu Installation :: White Screen After Installing Nvidia Restricted Driver As Prompted

Jan 6, 2010

I've had Ubuntu installed on my desktop for a month now, and its all worked like a charm, so I'm thrilled. I then decided to install it on my old laptop as well to see if I could breath a bit more life into it, and to get used to working Ubuntu a bit more. The laptop had 18.6GB partitioned to C:// drive or windows XP, and an empty 18.6GB D:// drive, so I deleted the D:// drive in XP using the Microsoft disk utilities tool, all well and good. I then did a clean install of Ubuntu-9.10-desktop with an Ubuntu CD into the largest continuous free space, and it set it up nicely. When I first booted it up there were a ton of updates to install, as there had been on the desktop first time, which I dutifully installed. As on the desktop a little notice popped up telling me to install the NVidia Proprietary driver for the NVidia card (specifically "NVIDIA accelerated graphics driver (version 96)[Recommended]"), as it had when I installed it on the desktop, so I chose to install that and then restarted the computer.

On restarting GRUB2 loaded, and it booted Ubuntu. I then saw the little white logo on the black screen for a couple of seconds, and then the screen goes completely white, with some pixels left behind fading to white slightly slower. First time through I held down the power button to force shut down, and on restart exactly the same thing happened. This time I held down alt+sysrq and went through the R, E, I, S, U, B sequence, however as opposed to usual I didn't get a black terminal-like screen after hitting any of the buttons, although it did reboot on B. It did boot correctly in recovery mode, however I was at a loss what to do here. Incidentally, the same problem occurred when I booted to previous version of the kernel as well.

Then I decided that as I didn't have any data to lose, and it was still early in the day, I'd do a clean re-install. This time I chose to ignore the updates, and just install the NVidia driver as prompted to check that it was the driver causing the trouble. Having installed the driver and restarted I got exactly the same problem as before - definitely this pesky NVidia driver, not any of the updates.So here I am at clean install 3, having just got all the updates, but not having downloaded the NVidia driver as prompted, with little desire to go through yet more reinstalls. My questions are:

1) Do I need to install this NVidia driver? The rest of the computer specifications are fairly paltry by modern standards, and I won't be doing anything graphics intensive on it (the most graphical program will probably be Battle for Wesnoth) and I I don't need to install it, not installing it seems to be the easiest way to solve the problem.

2) If I do need to install it how would I go around doing this without getting my charming white screen?

3) Is there a way of removing the driver from recovery mode that doesn't involve a clean install again? I have tried sudo apt-get purge nvidia-driver, which tells me there isn't any installed. I have tried sudo rm /etc/X11/xorg.conf which made no difference. I have tried dpkg-reconfigure xserver-xorg and this didn't help. I have tried a couple of other commands as well but I can't remember them, however I would probably recognise them if I saw them again.

Onto System information - pulled from listed specifications and SysInfo:

General System Information
Release:Ubuntu 9.10 (karmic)
GNOME: 2.28.1 (Ubuntu 2009-11-03)

[code]....

View 1 Replies View Related

Ubuntu Installation :: Stuck On Checking Battery State After Installing Nvidia Driver 10.10

Apr 21, 2011

I just installed ubuntu on my m11x and am completely new to ubuntu. After installing the latest driver for the 335m I am stuck at checking battery state and there is no way I can get to the gui anymore. The only access I have to are the tty's and I don't know what to do. I have already tried finding a solution for a couple of hours, but cannot find any. Please help me solve this problem, I do not want to reinstall again.

View 2 Replies View Related

Fedora Installation :: Enable Nouveau Back After Installing NVIDIA Driver?

Oct 17, 2010

I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?

View 2 Replies View Related

Ubuntu Installation :: Invoking Gazebo Gives Error - Appeared After Installing NVIDIA Accelerated Graphics Driver

Nov 6, 2010

I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error

[code]...

View 1 Replies View Related

Ubuntu Installation :: Boot, Plymouth D Out Of Memory Nvidia Driver?

May 13, 2010

Upgraded to 10.04 with proprietary Nvidia driver. No plymouth at boot, but dmesg gives error below. On shutdown get large plymouth display. Tried several hints but none work.

2.985912] 1179648 pages RAM
[ 2.985914] 951810 pages HighMem
[ 2.985915] 149486 pages reserved
[ 2.985916] 642 pages shared
[ 2.985917] 208097 pages non-shared

[Code]...

View 2 Replies View Related

Ubuntu :: Boot Screen Low Resolution After NVIDIA Driver Installation?

May 29, 2010

I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.

View 4 Replies View Related

Fedora Hardware :: F13 Cannot Boot After NVidia Driver Installation

Aug 25, 2010

I have installed F13 and after reading some Nvidia Driver installation guides I managed to blacklist nouveu driver. I run the 'init 3' command and it gave me an error something like 'nouveu driver still in use' then I reboot the system and the fonts were bigger than I run init 3 command again and this time installation was completed then I went back with init 5 command. I opened nvidia x server settings I have cloned the monitors and I installed the flash player,totem vs. Than F13 gave me the notification about updates and with yum update command It has downloaded and installed those updates. Then I shut the system off. When I restarted system it does not boot up. I see the loading bar and It hangs on at the end like forever. I have installed fedora again and the process I have done was same so the result.

View 2 Replies View Related

Ubuntu Installation :: Black Screen Boot-up After NVidia Driver Install?

Nov 8, 2010

I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21

View 9 Replies View Related

Ubuntu Installation :: Nvidia Booting - Automatically Boot To The Gdm/desktop After Updated Gpu Driver?

Oct 11, 2010

Hey everyone I'm pretty new to ubuntu/linux so please bear with me . I recently installed 10.10 on my new htpc. The initial install went great, until I went to install the updated driver for my graphics card. What I did was I downloaded the driver off of nvidia. Then I did these steps:

1. ctrl-alt-f1

2. logged in

3. sudo services gdm stop

4. I then located the driver package that I downloaded and ran it, it seemed to install fine (except for an error about some install script? but it let me proceed)

5. sudo services gdm start

It went to the gdm/ubuntu desktop. However I then connected it via HDMI, and the resolution was way off (top bar was not even displayed on TV) and I tried many different settings but no luck in fixing it. Next after restarting it did not automatically boot to the gdm/desktop. Instead it stayed at the command line login (the ctrl-alt-f1 screen).

tl;dr : 1. How to make it automatically boot to the gdm/desktop after I updated my gpu driver

2. How to fix the resolution for HDMI from my gpu to my TV. (DVI works fine

View 1 Replies View Related

Hardware :: NVIDIA 8800 GTS - Dual Boot Fedora 10 Does Not See The NVIDIA Driver

Feb 5, 2009

I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.

Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.

I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.

Here are my specs:

CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W

It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.

I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.

View 1 Replies View Related

Ubuntu Installation :: Nvidia Driver Broken After Kernel Update / "System InstallArchive() Error" When Installing?

Jan 30, 2011

I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.

Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.

I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching

I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.

jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.

I tried installing nvidia-current via apt-get and I get these errors:

Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.

View 7 Replies View Related

Fedora :: Installing The Nvidia Driver On F12?

Jan 22, 2010

I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:

Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: Installing NVIDIA Driver On Kubuntu 10.04?

May 20, 2010

I want to install new nvidia driver for geforce 8600 on ubuntu 10.04 but I recive the following error: The binuteals is not installed on the system.

View 1 Replies View Related

Ubuntu :: Low Resolution Bootscreen After Installing NVidia Driver

Aug 1, 2010

My native resolution is 1366x768.

View 8 Replies View Related

Ubuntu Multimedia :: Installing Nvidia Graphics Driver On 10.04?

Oct 3, 2010

I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.

View 2 Replies View Related

Ubuntu :: Nvidia Driver Messed Up - Installing It Via Ctrl Alt F1

Jul 27, 2011

I tried installing it via ctrl alt F1, i managed somehow to install it,i needed to because the old one was conflicting with my card(8800 Ultra), and this showed up when i typed in startx. Using ubuntu 11.04 [IMG] [URL]

View 9 Replies View Related

Software :: Installing Nvidia Driver With '.run' Extension In Ubuntu

Jul 22, 2010

I am trying to install Nvidia card driver. The driver has got a .run extension and i don't know how to handle that, I've tried to extract like i did with .tar files but didn't work. I clicked the file while in X window and it opens a terminal and runs for a sec and said i have to exit X window and run as root. so i exit X window and login form CUI, navigate to the folder and type "NVIDIA-Linux-x86-185.18.08-pkg1.run" but nothing happens, so i add sudo and tried but All i get is "NVIDIA command not found". I guess this is not a problem but i just don't know how to handle the .run file. please help. I am using Ubuntu Lucid Lynx LTS. I' ve checked other threads and found some issues regarding Nvidia drivers but i wanna know how to handle the .run files.I've windows xp, 7, Puppy Linux and Lucid Lynx on my desktop and whenever i repair windows the GRUB got damaged. Is there a way to recover the loader without reinstalling the whole linux OS like getting into recovery console and fixboot,, fixmbr for restoring windows?

View 3 Replies View Related

Debian :: Jessie 8 - Installing NVIDIA Driver

May 15, 2015

I have installed before with ease following the Debian how to. On jessie 8 I have an issue with black screen, probably miss configuration but can't figure what?

View 8 Replies View Related

Fedora :: Installing The Nvidia 8800gt Driver On F12?

Dec 22, 2009

I have trouble installing the nvidia 8800gt driver on Fedora 12.It keeps on asking me to exit the x-window, but how?

View 10 Replies View Related

Fedora :: Does Not Start After Installing Nvidia Driver

Jul 30, 2010

I installed nvidia graphics card on my fedora 13. It is not starting since then. Just the logo of fedora comes up, progresses, and it stops. What can be done to boot the os?

View 2 Replies View Related

Fedora :: Advantage Of Installing The Nvidia Driver?

May 25, 2011

Currently I have F15 running with the nouveau driver. What is the advantage of installing the nvidia driver?

View 8 Replies View Related

OpenSUSE Install :: GUI Not Getting After NVIDIA Driver Installing In 11.3

Jan 8, 2011

I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.

HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m

View 1 Replies View Related

Hardware :: Installing Nvidia Driver In Fedora 10?

Dec 1, 2008

I am having a world of trouble getting my old GeForce2 MX400 to work in a fresh install of Fedora 10. I included the RPMFusion directories, so my yum repolist includes:

rpmfusion-free RPM Fusion for Fedora 10 - Free enabled : 324
rpmfusion-free-updat RPM Fusion for Fedora 10 - Free - Update enabled : 0

But when I type yum list | grep nvidia, nothing comes up. When I type yum install kmod-nvidia or yum install akmod-nvidia, it says there's no package like this. Have these been updated for Fedora V10 yet? If they haven't, I guess I will just have to use another distro. BTW, when I tried installing the driver from the NVIDIA website, it says it needs to recompile the Kernel, and after installing gcc and make, it still gave some weird error about how with kernel 2.6 it can't find the proper kernel headers or something like that. I heard somebody post that you shouldn't use the NVIDIA drivers, they mess up OpenGL, you should you Livna kmod-nvidia.

1) Would you recommend livna kmod-nvidia or Nvidia's own driver's for a GeForce2 MX400 and Fed 10?

2) Whichever you recommend, could you give some clue how to get around either problem I'm having?

View 12 Replies View Related

Slackware :: Installing Nvidia Driver 13.37-amd64?

May 22, 2011

how to install this driver?

I disabled X server and I blacklisted nouveau kernel, but when I try to install the driver it says Error: Could not create the kernel module.

View 14 Replies View Related

Ubuntu Multimedia :: Installing Nvidia Mx200 Driver - X Will Not Load ?

Dec 31, 2010

I am trying to setup a computer with xubuntu 10.10 for my dad. It is mostly working, but flash animations/games run somewhat poorly. I think I might be able to fix this by using the non-free nvidia drivers, but I cannot seem to get them installed.

Sysinfo reports that the video card is an nvidia geforce mx200, so I downloaded the nvidia 96 driver package from the repositories, ran the configuration program, & rebooted. As you may guess, x did not load.

I have been working on this intermittently for a few weeks, & I do not remember everything I might have tried to fix it, but here is what I am sure of:

Sysinfo reports that the video card is an nvidia geforce mx200

when i try "sudo modprobe nvidia," I get the message "FATAL: Module nvidia not found." "sudo modprobe nvidia-96" gives no such error.

When I check the Xorg.0.log, I find:

The nouveau driver does not seem to work either, but if I remove the xorg.conf file, x works okay. How to get Flashplayer running more smoothly.

View 6 Replies View Related

Ubuntu Multimedia :: Display Has Lines Through Everything After Installing NVIDIA Driver?

Jan 14, 2011

Im running Ubuntu 10.10 on an Nvidia ION gpu. I've installed the latest driver using the built in driver tool and by downloading from nvidia. Both times this has been the result at every resolution:[URL]

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved