Ubuntu :: Installation Not Completed - Black Screen On Boot

Aug 30, 2010

I have an Acer Aspire One that runs Windows XP. I downloaded both the full Ubuntu (latest version but can't remember the number) and the Ubuntu for netbooks- each on a separate flash drive. I thought I had the netbook version in my Acer when I booted it up, but I saw it was booting the full Ubuntu version. Instead of allowing it to finish installing to run from the flash drive, I stupidly shut it down and removed the flash drive. Ever since then, when I try to boot my Acer, all I get is the black screen of death. I've tried the flashit.exe to flash the BIOS, but no luck. So, I'm guessing it's not a BIOS issue.

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Can't Boot 10.04 Disc - Boots To A Purple Screen Then It Goes To A Black Screen With A Load Of Writing Nothing Else Happens After Screen

May 12, 2010

I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?

View 1 Replies View Related

Ubuntu Installation :: Can't Boot From Cd \ Purple Screen With A Couple Symbols At The Bottom, And Then The Screen Goes Black?

May 27, 2011

'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens

View 4 Replies View Related

Ubuntu Installation :: Cannot Boot / Hangs On Black Screen With A Flashing White Dot In Top Left Corner Of Screen?

Jun 1, 2010

After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.

my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.


i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.


pls let me know if there is anything i missed, and advice if possible in what to do.



thanks
kannanni

View 2 Replies View Related

Ubuntu Installation :: Black Screen When Trying To Boot Pc

Jan 28, 2010

Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.

[Code]...

I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.

View 9 Replies View Related

Ubuntu Installation :: Black Screen After Second Boot With Updates

Jan 4, 2010

I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.

View 2 Replies View Related

Ubuntu Installation :: FGLRX Black Screen At Boot?

Mar 1, 2011

I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage

View 2 Replies View Related

Debian Installation :: Black Screen On Boot?

Jan 8, 2011

after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.

View 10 Replies View Related

Fedora Installation :: 12 Boot - Getting Black Screen

Jan 19, 2010

I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/

View 2 Replies View Related

Ubuntu Installation :: Grub Broken + Black Screen On Boot

Jun 15, 2010

PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.

Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.

Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.

View 6 Replies View Related

Ubuntu Installation :: After I Boot Into Setup / It Stays At A Black Screen

Jun 16, 2010

Had Ubuntu installed, it worked fine but I had to format for a new partition (out of space) I program in Windows, I would consider myself a Windows geek, and would like to try out Linux. After I boot into setup, it stays at a black screen. It did that when I was installed Ubuntu, the first time. I don't know how exactly it ended up working, after a lot of different things I was able to get it to boot.

View 3 Replies View Related

Ubuntu Installation :: Boot To Black Screen Following Latest 10.04 Update

Jun 30, 2010

I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.

AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650

View 7 Replies View Related

Ubuntu Installation :: Boot Process Halts With A Black Screen

Aug 16, 2010

I'm trying to update an older laptop for my nephew. It was running Hardy Heron (Ubuntu 8.04 LTS) successfully.

However, after installing a clean copy of Lucid Lynx (Ubuntu 10.04 LTS), the boot process halts almost immediately with a black screen. There is no blinking cursor and no hard-drive activity.

When I hold down the "Shift" key after the rebooting the computer, I'm able to edit the grub2 boot options.

When I remove the "quiet" boot option, I'm able to see about a page of text before the boot process halts and displays the black screen. Here is the last bit of text that appears just before the black screen:

Code:
...
Begin: Running /scripts/init-bottom ...
Done.

At this point, the font style changes slightly. Then the text is replaced by the solid black screen. There is no blinking cursor, and the hard drive activity ceases.

I've tried booting in rescue mode: This also halts at a solid black screen.

This is an older laptop: I had to boot the installation disc with the boot option "noapic" in order for the installation disc to run.

However, the installation seemed to run normally. I was able to finish installing the system. But, after removing the installer disc and rebooting, we were met with that solid black screen almost immediately after booting.

I used the minimal install disc: [URL]

I've verified the MD5 checksum for the disc image. And I've successfully used this same disc to install Ubuntu for my mother.

But my little nephew is left without a usable system.

Could we be missing a boot option?

View 1 Replies View Related

Ubuntu Installation :: When Go To Boot - Just Flashes The Underscore On A Black Screen

Nov 3, 2010

I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?

View 1 Replies View Related

Ubuntu Installation :: Boot From USB Drive - Purple / Black Screen Comes Up

Feb 1, 2011

I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.

When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.

With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?

View 9 Replies View Related

Debian Installation :: Screen Goes Black On First Boot After Install

Aug 22, 2014

I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.

View 13 Replies View Related

Debian Installation :: Gateway - Black Screen Upon First Boot

Dec 28, 2014

I am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.

I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.

View 14 Replies View Related

Ubuntu Installation :: Acer Revo Aspire Black Screen On Boot?

Jan 23, 2010

Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.

View 1 Replies View Related

Ubuntu Installation :: Black Screen Saying Init Was Not Found Or Something In That Nature When Boot

Aug 23, 2010

Recently I tried installing Ubuntu via CD, I burned the Image like the website said, It booted then it gave a black screen saying init was not found or something in that nature. I tried a few more times with no luck. I am making another CD to see if it works, hopefully it will,. Its a relatively old HDD. It has Win 98 on it. 9.18 GB space.Quantum Fireball lct 10 3.5" series.

View 5 Replies View Related

Ubuntu Installation :: Black Screen Boot-up After NVidia Driver Install?

Nov 8, 2010

I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21

View 9 Replies View Related

Ubuntu Installation :: Xubuntu Live Cd Won't Boot - Hangs At A Black Screen

Mar 25, 2011

I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]

View 3 Replies View Related

Ubuntu Installation :: Black Screen On Boot (Unable To Follow Sticky)

May 1, 2011

after managing to install ubuntu onto a Samsung n220 netbook, when I boot up im presented with just a black screen. I have tried to follow the sticky [URL] but I am slightly lost. I can press CTRL ALT F1 and get a login prompt - tty1. The commands from the sticky do not seem to work or do anything, and certain ones listed come back with a "Command not found" error.

View 1 Replies View Related

Fedora Installation :: Black Screen On Boot After Fresh Installation Of F12

Nov 24, 2009

I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.

View 9 Replies View Related

Debian Installation :: Zenbook UX305 - Black Screen After Boot

Aug 16, 2015

On a Zenbook UX305, I did a fresh install of Debian. After booting, the screen turns black and I can't switch between terminals by typing Ctrl-Alt-F1..F7. After a boot with the keyword debug, the file /var/log/debug has the following contents:

URL] ....

View 4 Replies View Related

Debian Installation :: Black Screen With Cross Pointer After Boot

Sep 19, 2015

Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.

I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.

I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same

Not actually solved, but in the end just reinstalling got rid of the problem.

View 6 Replies View Related

Fedora Installation :: Boot Freezes At Black Screen After Update

Mar 12, 2009

Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.

I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.

View 2 Replies View Related

Fedora Installation :: Black Screen In Preupgrade From 10 On Boot (anaconda)?

Sep 6, 2009

i did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration

View 1 Replies View Related

Ubuntu Installation :: Boot From CD And Install Also Have Screen Black With 1000 Ligne Error?

Jan 1, 2010

Im newer in ubuntu i try to install ubuntu 9.10 in my Laptop HP DV5 Core2Duo 4Go Ram rin Windows 7 32bits and in Disc C: already windows 7 install on then i want install the both in th same HDD, like the same operation i make it in my Desktop Dell and it work perfectly, but now i have a error message please see Screenshot and I try to boot from CD and install Ubunto also i have screen black with 1000 ligne error

View 7 Replies View Related

Ubuntu Installation :: Boot The Disc After Restarting The Computer The Screen Just Turns Black?

Nov 8, 2010

I had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?

View 1 Replies View Related

General :: Acer A0A 110 Has A Black Screen During Boot Up Along With A Black Cursor?

Dec 8, 2010

I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved