Ubuntu Installation :: Laptop Won't Boot - Swapoff Failed: Invalid Argument

Jun 5, 2011

I have a SONY laptop, PCG-7181M model. It came with Windows 7 but I changed the OS to Ubuntu. Last night it asked me to upgrade to the new version called Natty Narwhal. I had to go to bed so I changed the sleep timer on the laptop to 2 hours, the time it would have taken the upgrade to complete. I woke up and the laptop was off, now only the grub menu shows up and the laptop won't boot. I tried doing this: - When the machine boots up, press Esc to get to the Grub menu - Select one of the recovery mode options. This will boot you up to a single-user root prompt. - Run sudo fdisk /dev/sda (this assumes that your hard drive is at sda) - Type p to see which hard drive partition is labeled Linux swap. In my case the partition was /dev/sda5. Type q to exist fdisk. - Type these commands:

[code]...

View 1 Replies


ADVERTISEMENT

Fedora X86/64bit :: Device-mapper - Reload Ioctl Failed - Invalid Argument Failed To Suspend LogVol00

Sep 10, 2009

I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.

I'm using the latest kernel but I still have this problem

Running Logical Volume Manager gui and attempting to extend the volume results in the same error.

View 3 Replies View Related

OpenSUSE :: Management - Update - Install Or Remove A Package - Subprocess Failed. Error: RPM Failed: Rpmdb: PANIC: Invalid Argument

Apr 9, 2010

Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.

[Code]....

View 4 Replies View Related

Ubuntu :: Error Failed: Invalid Argument

Mar 5, 2011

i downloaded baldurs gate II shadows of amn iso's, because i lost one of the CD's to the box, but anyways, I went to mount the third .ISO for installation, and BAM! my computer froze, so i waited five minutes, came back, and still frozen. shut it down for 20 minutes, pulled it back up, and it's got this error as follows; "Mount: mounting /dev/disk/by-uuid/65b0a6a-a366-435a-a086-58428cfe2bd1 on /root Failed: invalid argument

[code]...

View 6 Replies View Related

General :: Sendto Failed -1 : Invalid Argument?

Sep 10, 2010

I'm not sure why the sndto() is failing.

STATUS send_request(const packet_t * pkt)
{
int fd = -1; /* socket filedescriptor */

[code].....

View 1 Replies View Related

Ubuntu Servers :: RAID Won't Assemble: Failed To Add /dev/sda To /dev/md0: Invalid Argument

Jul 3, 2010

My hard drives kept dropping out of the raid array, so I finally identified the problem as a bad sata cable. I redid the wires and now when I try to assemble I get this:

Code:

mdadm -v --assemble --scan /dev/md0
mdadm: looking for devices for /dev/md0
mdadm: no recogniseable superblock on /dev/sde4

[code].....

View 5 Replies View Related

General :: SET Failed On Device Wlan0 ; Invalid Argument

Sep 29, 2010

I m unable to bring my wireless lan UP and getting the following error: SET failed on device wlan0 ; Invalid argument in dmesg i m getting : link not ready wlan0 Network card is : Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)

View 7 Replies View Related

Ubuntu :: ZoneMinder ZMU - Error - Failed To Get Channel 0 Attributes - Invalid Argument

Jan 23, 2010

I have a Sweex USB webcam which I am trying to setup with ZoneMinder, however I cannot find the settings for it, and when I run:

Code:

I get:

Code:

Code:

Provide settings, or how to fix ZMU?

View 5 Replies View Related

Hardware :: Failed To Start Scanner: Invalid Argument HPc6380

Jun 20, 2010

Trying to get scanning going with my all-in-one, and have been troubleshooting it for awhile, and nothing works. Could use expert advice on this topic for an HP c6380 All-in-One. Printing does fine. All attempts at scanning are failing. scanimage -L says the device is my webcam. I don't know if usb scanner is in /dev.

View 4 Replies View Related

General :: Read Swap Header Failed Invalid Argument (F12)

Aug 25, 2010

When I boot, after startup and before I log on, an error icon appears. I click - it shows a summary of the material that normally rolls by on a unix startup. One item is checked. It says:

Code:
Enabling /etc/fstab swaps: swapon: /dev/mapping/vg_knox-lv_swap:
read swap header failed: invalid argument
I have 1 disk - it has 2 partitions - one an 83 type with a file system in it, holds the kernel, mounts at /boot.

The second partition is an 8e type contains a volume group logically split between lv_root and lv_swap and physically located on sda2. As I understand it, the system is having trouble processing the commands for lv_swap. I am tempted to mess with these commands, but don't have enough know how to do so and am short on the time required to learn enough to master this subject.

View 5 Replies View Related

General :: Mount USB Mounting /dev/sda1 On /mnt/usb Failed: Invalid Argument

Jul 23, 2010

I am using an embed linux application and trying to mount a USB device. The USB worked fine in windows. I then put it on my Linux box formatted (I hope correctly) And then tried to do the following to mount it

Code:

Disk /dev/sda: 4040 MB, 4040748544 bytes
255 heads, 63 sectors/track, 491 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[code]....

View 10 Replies View Related

Ubuntu :: Error: Device-mapper: Reload Ioctl Failed: Invalid Argument

Jun 13, 2010

I'm having some difficulities with truecrypt and cannot figure out what's wrong since this is my first attempt to create hidden encrypted partition. I'm using ubuntu 9.10 64b with latest 6.3a truecrypt. After using truecrypt gui (just command truecrypt) I've tried: create volume-->create volumne within a partition/drive-->hidden trucrypt volume --> select some /dev/sdX by my choice --> select aes & sha512 --> password --> and format it.

when formating finished message "wrong ss, swith or wrong superblock of /dev/loop0" appeared. I've got no idea what could I do with it neither know whats program trying to do! Ok formating's done, then if you're trying to mount that partition then I would expect prompt for password, but that did not happen ...

EDIT: sudo mount /dev/loop0 /media/tmp/ also complaint about wrong superblock, but that does not ring any bell since i've got no idea what /dev/loop0 is or is for...

EDIT2: I've tried another approach also:

sudo truecrypt -t -c
sudo truecrypt -t /dev/sda3 --filesystem=none

but the first command finished creating 100G drive in 1 sec (nonsense) and latter one prints:

Error: device-mapper: reload ioctl failed: Invalid argument
Command failed

View 3 Replies View Related

Fedora Hardware :: Failed To Start Scanner: Invalid Argument HPc6380?

Jun 19, 2010

I am trying to scan with an All-in-One HP c6380. I get the message:Failed to start scanner: Invalid argumentwhen I press the scan button in the GUI.

View 14 Replies View Related

General :: Mount: Mounting /dev/loop0 On /mount_dir Failed: Invalid Argument

Nov 25, 2010

I am getting error while mounting loop dev over mount_dir. my step as follows:

#mkdir /mount_dir
#mount -o loop /mount_dir
mount: mounting /dev/loop0 on /mount_dir failed: Invalid argument

View 1 Replies View Related

Ubuntu :: Error - Mounting /dev/disk/by-uuid/[insert Hex Code Here] Failed: Invalid Argument

Mar 18, 2010

I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.

But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.

View 6 Replies View Related

Hardware :: Error Mounting - Failed To Read Last Sector (3907027119): Invalid Argument

Sep 7, 2010

I'm trying to mount my new Western Digital Elements 2tb hard drive, but every time I try to plug it into the computer I get this error message:

Quote:

Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument

HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),

[code].....

But when I tried opening the hard drive from nautilus I still got the same error message as above (no other volumes was connected at the time). I've also tried opening and watching it in GParted, and I can see it there as a volume that's not allocated. When I tried to allocate the hard it I got the message that it had no partition table. And that I cold make one. I tried and Ubuntu suggested to make a MS-DOS partition table for it. But there I got a little scared as I've not done this before. The external hard drive is brand new and was brought today. And I don't have the possibility to test it with Windows or Mac as I'm using Linux only on my machines.

View 6 Replies View Related

Ubuntu Installation :: 10.04 Upgrade Will Not Boot "invalid Argument" Error

May 1, 2010

I did the online upgrade from 9.10 to 10.04, using 64 bit. I was forced to as the 2 solutions to my incedibly slow internet lookups both required new package installs, both of which failed, so hoped it was sorted out in 10.04 TLS.

It all went to plan until it tried to reboot. I get this:

mount: mounting /dev/disk/by-uuid/1e4e276c-8741-42e7-b52e-05c195790d28 on /root failed: invalid argument
mount:mounting /dev on /root/dev failed: No such file or directory

[Code].....

I don't have RAID at all a single Samsung 200GB SATA drive as the boot drive. Can someone tell me where to start looking? Also how can a TLS release screw up so badly on a common Gigabyte motherboard?

View 9 Replies View Related

Ubuntu Security :: ClamAV - Clamscan With Libclamav Error (opcode And Bytecode) Failed To Run: Invalid Argument Passed To Function

Jul 23, 2011

after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:

[Code].....

View 3 Replies View Related

Ubuntu :: Boot Fails From HD - Error Getting Socket / Invalid Argument

Jun 20, 2011

I have an old PC with two hard drives (40 and 60Gb) and it uses dual IGhz pIII processors. It shares screen,mouse and keyboard with another PC.Both into Netgear modem. It ran ubuntu 8.04 and XP Pro on the drives above with no problems. Then I decided to try Mint 11 (34bit CD) - result after Grub blank screen other than flashing cursor at top left.No input from keyboard.
Tried Mint KDE 10 (34bit DVD) same result.
Tried Kubuntu 10 (CD) same result.
Reinstalled Ubuntu 8.04 no problem.
Upgraded via download from 8.04 to 10LTS hoping that this would somehow prevent the problem and have screen which says:-

starting up
[000000] ACPI no DMI BIOS year,ACPI =force is required to enable acpi
mount: mounting none on /dev failed: No such device
udevd[825]: error getting socket: Invalid argument
error initialising netlink socket
udevd[825] error initialising netlink socket
libudev: udev_monitor_new_from_netlink:error getting socket:Invalid argument
Segmentation fault
Gave up waiting for root device.Common problems:
Boot args (cat/proc/cmmdline)
Check root delay (Did the system wait long enough)
Check root (did the sytem wait for the right device)
Missing modules (cat/proc/modules; 1s /dev)
ALERT! dev/disc/by-uuid/"long number here" does not exist.Dropping to a shell.

Then it goes into Busybox and ends with "initramfs". I have tried altering the boot device in BIOS from HDD0 through 3 with the same result other than more bad language!

View 9 Replies View Related

CentOS 5 :: SCTP Setsockopt Failed Error Code 22 (invalid Argument For SCTP Events)?

Mar 11, 2009

We Are Using Centos 5 64Bit with Kernel 2.6.18.92 with Amd Athlon ProcessorThe problem when calling setsockopt it return error errno:22 InvalidargumentThis code run on Macos ,Sunsolaris ,But fail to execute on Centos 5 64bit & The SCTP mailing group told me that this problem belongs to centosexample form ibm webside

/*
server
*/

[code]....

View 4 Replies View Related

Ubuntu Installation :: Cannot Mount /dev/loop0 :invalid Argument

Apr 8, 2011

I'm having troubles installing ubuntu on my "Acer one 522" netbook, I have made a pendrive with unetbootin and ubuntu 11.04 natty and upon booting into the usb i get the boot loader displayed properly, start to load ubuntu, then about halfway through i get some screen tearing with a really small shot of the boot loader screen in the top left hand corner followed by some command lines saying "cannot mount /dev/loop0 :invalid argument".

View 1 Replies View Related

Ubuntu Installation :: Invalid Argument Error During Installation

Jul 3, 2011

i am trying to install ubuntu inside windows xp. But "invalid arguement" error occured.
log file is

[Code]...

View 3 Replies View Related

Ubuntu :: "Can't Load Vesafb.ko: Invalid Argument" On Boot?

Feb 13, 2010

Can't load vesafb.ko: Invalid Argument" on boot

View 1 Replies View Related

Ubuntu :: Laptop Boot Failure - Invalid Enviroment Block - Unable To Load Default Boot Entries

Mar 3, 2010

Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...

View 1 Replies View Related

Ubuntu :: TTY Fonts - KDFONTOP: Invalid Argument ?

Jan 15, 2011

I was trying to change the console fonts. I remember that I did successfully change the console fonts back when I was using Jaunty with this:

Code:

View 8 Replies View Related

Red Hat :: Error Inserting MD5 - Invalid Argument

Mar 24, 2011

I am running Red Hat with 2.6.18-194.8.1.el5PAE kernel version. I am trying to run encryptfs to encrypt a partition on my hard drive. One of the kernel modules necessary is the md5.ko. I noticed it wasn't loaded in when doing an lsmod. I tried running modprobe md5 and it fails to load:

[root@ ~]# /sbin/modprobe -v md5
insmod /lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko
FATAL: Error inserting md5 (/lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko): Invalid argument

I ran dmesg and grepped for md5, but I didn't see anything in there.

View 1 Replies View Related

Networking :: Invalid Argument With Iwconfig Command

Jan 31, 2011

I am trying to connect to a wireless network. I got a problem with network manager. So I try to connect manually

I found wireless network around by using "iwlist scan" command.

I want to connect to a network with ESSID "MCC(Mandalay)" and Key "mdymcctraining"

Here is my problem The output of "iwconfig" command is

Code:

What does it mean "invalid argument"? It means that my wireless pre-sharedkey is not correct? I am sure the key is valid. It is used by any others with window 7.

View 1 Replies View Related

General :: Cannot Run ARPD Command - Invalid Argument

Aug 17, 2010

I've a problem when I try to run arpd program to support my honeyd software but when I try to execute it then it shows this error message
./arpd 10.0.0.0/8
arpd: intf_get: Invalid argument
My arpd installation based on this tutorial [URL].

View 2 Replies View Related

General :: Dmsetup Create Invalid Argument?

Nov 3, 2010

I am getting the following error message when running dmsetup command:

dbacb01:~ # echo 0 4096 linear /dev/loop1 0 | dmsetup create new
device-mapper ioctl cmd 9 failed: Invalid argument
Command failed
dbacb01:~ # uname -a
Linux dbacb01 2.6.5-7.282-smp #1 SMP Tue Aug 29 10:40:40 UTC 2006 i686 GNU/Linux

View 1 Replies View Related

General :: When Type Ifconfig - Invalid Argument

Jul 1, 2011

When i type 'ifconfig eth0 192.168.25.1 255.255.255.0' the outcome is 'SIOCSIFADDR : invalid argument', but when i check the ip address using /sbin/ifconfig i see the ip address is updated to 192.168.25.1 and is up. When i restart the linux box,the /sbin/ifconfig is reset to 192.168.100.1 .what should i do so that the linux box /sbin/ifconfig should not change when am rebooting.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved