Ubuntu Installation :: Grub For Dual Boot (with Windows 7 Pro)?

Jul 8, 2011

11.04 installed on free space I had setup but it didn't install Grub2 for a dual boot (with Windows 7 Pro). It may have gotten confused with my disk setup. Drives and their groupings (Windows lingo):

- Windows 7 Pro on C-drive (appears to be sdb2), it is a SSD
- The free space was setup on this SSD and Ubuntu is located on sdb5 (Linux) and sdb6 (swap space).
- Applications stored on D-drive (RAID0 with 2 small SSDs using RST (Intel Rapid Storage Technology).
- data on a RAID card using HDs in RAID0.

Small wonder it got confused, if that is the problem. I have a LiveCD I can use to boot, is that the best? What are the commands to install. Is there a better way?

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: Dual Boot Windows Vista / Lucid 10.04, Grub Doesnt See Windows?

May 7, 2010

I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......

View 3 Replies View Related

Ubuntu Installation :: Dual Boot Using Windows Boot Loader, Not GRUB?

Nov 8, 2010

I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.

I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.

I feel like I'm halfway there, I just need to get Grub to load correctly or something.

View 8 Replies View Related

General :: Grub Boot Loader Installation In Dual Boot Machine After Windows 7 Installation?

Mar 23, 2010

I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.

View 4 Replies View Related

Fedora Installation :: Dual Boot With Xp - Grub Can't Boot Into Windows?

Jan 10, 2010

I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).

I installed grub on the Fedora disk so as to not touch the windows disk at all.

Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)

My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?

View 7 Replies View Related

Ubuntu Installation :: 32 To 64 Bit - Dual Boot With Windows 7 - Messing Up Grub

Feb 19, 2011

I'm running 10.10 32 bit and would like to reformat to 10.10 64 bit. However, I am dual booting with windows 7 under grub. I've had some crap experience (my fault) with grub before and would like to make sure I have a plan. I've downloaded the 10.10 64 bit. Can I simply boot and install 10.10 64 bit without concern of messing up grub? Horror story: Installed ubuntu once before with dual boot and somehow grub couldn't find windows

View 1 Replies View Related

Debian Installation :: 8.3 And Windows 10 Dual Boot GRUB EFI Removed

Feb 3, 2016

I've been using Debian for a few years but always on dedicated boxes and/or VMs.

Finally decided to dual boot Debian and Windows on my main Desktop PC.

Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.

The issue arrives when I reboot and load into Windows 10. It boots fine.

However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.

After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.

Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).

I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!

Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).

View 4 Replies View Related

Ubuntu :: Missing Grub And Dual Boot Menu - Windows Won't Boot

Jul 3, 2011

i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:

[URL]

Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.

View 8 Replies View Related

Ubuntu :: Grub - Unable To Boot Into Windows 7 On Dual Boot

Mar 23, 2011

I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub

Code:

Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic

[code]....

View 8 Replies View Related

General :: Dual Boot And Windows 7 But Use The Windows Bootloader Instead Of GRUB?

Sep 11, 2010

Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?

View 2 Replies View Related

Installation :: Dual CentOS - Windows 7 Boot - Had To Delete CentOS Partition And No Grub Menu

Sep 19, 2010

3 partitions (in order): Windows 7, CentOS and shared data partition.

I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).

GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).

Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.

Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?

View 2 Replies View Related

Ubuntu :: Dual-boot Windows 7 Without GRUB?

Aug 7, 2010

I am running a dual-boot of Ubuntu 10.04 and Windows 7. My current setup uses EasyBCD to pick between Ubuntu and windows. If I pick Ubuntu, it then fires up GRUB, which then goes to Ubuntu. My question is: Can I skip GRUB altogether in the boot process? I rather suspect that it's slowing things down a lot. I've set the GRUB default OS timeout to 0, but it still boots slowly, which annoys me. way to skip GRUB entirely and use only EasyBCD for both OSes?

View 4 Replies View Related

Fedora Installation :: Dual - Boot Into Windows 7 From GRUB - Black Screen Says "BOOTMGR" Is Missing

Apr 27, 2010

I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.

View 2 Replies View Related

OpenSUSE Hardware :: GRUB To Dual Boot 11.2 And Windows XP But Hangs On Boot

Apr 20, 2010

HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.

But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.

View 9 Replies View Related

Ubuntu :: Deleting Grub - Windows Dual Boot

Jun 2, 2010

I have my laptop NC6910p from HP with windows 7 and Ubuntu lucid as dual boot managed by grub loader.

Yesterday I made a mistake and formated the ubuntu partition as ntfs with a windows media because I needed to do a test in that partition. Now, off course, when I boot the computer is not finding GRUB and naturally not booting to windows.

I tried to boot with ubuntu live cd and did the apt-get install ms-sys but it just does not find the package. I can browse the windows files and all of that.

View 5 Replies View Related

Ubuntu :: Dual-boot Lubuntu - Windows XP Grub ?

Nov 3, 2010

After the last Lubuntu update Windows XP disappeared from the grub and it doesn't appear on the OS list. Is there any way I can fix or restore the grub to display XP again? I ran TestDisk and the XP partition is there undamaged, it also appears in the file system and I can access the files in Lubuntu; it's just not appearing in the grub anymore.

View 9 Replies View Related

Ubuntu Installation :: Win 7 Dual Boot - Revert Grub 2 To Grub 1?

Mar 26, 2010

So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?

View 7 Replies View Related

Ubuntu :: No Dual Boot - Windows Overwrite Grub File

Jan 5, 2011

I've recently left Windows behind for good and have come to Linux (Ubuntu.) However, I've run into problems after trying to dual boot windows 7 and ubuntu. When I restarted my computer, I got a black screen with white text reading "Minimal BASH-like line editing is supported". I have the Ubuntu live cd and was able to try Ubuntu without having to install it, but after I put in a flash drive with Windows 7 on it, the Ubuntu CD has stopped working entirely.

The weird thing is, the computer that I installed Ubuntu on, already had Ubuntu and Windows 7 on it. And every OS was booting successfully. The reason I deleted the Ubuntu that was already on the computer, is because there were many different versions. I wanted to do a clean sweep and only have Ubuntu and Windows 7 installed on the computer. I know that if you try to dual boot Windows 7 and Ubuntu, Windows will overwrite the GRUB file, making it unable to dual boot.

View 5 Replies View Related

Ubuntu :: Dual Boot - Windows - Grub Hard Disk Error ?

Oct 1, 2010

I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:

After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:

Code:

It's all on one hard drive which doesn't show any errors:

Code:

Partition table entries are not in disk order

Code:

Some partitions don't show a file system because they are luks-encrypted.

As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.

As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.

Finally, an extract from my /boot/grub/menu.lst:

Code: ...

The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.

I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.

I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.

Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?

View 9 Replies View Related

Software :: Dual Boot Grub - Windows XP BOOTMGR Not Found

Nov 30, 2010

Rebuilt an old box of mine and changed up the drives. Did not think it was an issue as I was formatting the drives and reinstalling the systems. I installed XP first. Then PCLOS. After PCLOS was installed XP would not boot and gave me an error saying the BOOTMGR was not found and to restart. I figured that I just had to map the drives as XP was installed on HD1 and not HD0. But no changes I made to the GRUB configuration seemed to work.I have run a script to get all the information you guys will need already. Let me know what I am missing here

Code:

Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdb

[code]....

View 14 Replies View Related

OpenSUSE Install :: Unable To Re-load Grub Following Windows 7 SP1 Upgrade On Dual-Boot?

Apr 28, 2011

A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.

I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.

FYI the PC has a single SATA disk installed partitioned as follows:

dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT

View 8 Replies View Related

General :: Editing Grub.conf To Make Windows Default In Dual Boot?

Mar 31, 2010

I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):

#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz

[code]....

View 4 Replies View Related

Ubuntu Installation :: Grub Dual Boot - Cannot Boot Win 7

May 3, 2010

I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.

View 6 Replies View Related

Ubuntu Installation :: Dual Boot - Windows 7/10.4 - No Windows Now After Upgrade

Apr 30, 2010

I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.

During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.

So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.

View 9 Replies View Related

Software :: Dual-Booting With Ubuntu Using Grub 2 And A Truecrypt Windows Installation

Apr 29, 2011

I've been trying to get a dual-boot system with a truecrypted Windows partition and grub 2 in combination to work successfully and to date, I haven't had much luck. I'm using the grub 2 version from Ubuntu 10.04.2 LTS.I understand from searching through Google that there is presently no easy way to chainload the Truecrypt boot loader from Grub 2 in a similiar way that was done with Grub 1. This is because the Grub 2 payload is much larger and actually overwrites some of the Truecrypt boot loader, preventing it from starting.Does anybody know what might be going wrong here? I've been looking for ages now and can't seem to find any solution to this problem apart from restoring the Truecrypt loader to the hard disk and trying to chainload Grub 2 from Truecrypt. I'd rather use Grub 2 as the main loader though as Ubuntu Linux will be the main operating system in use.

View 7 Replies View Related

Ubuntu Installation :: Grub Won't Dual Boot Vista But 10.04 OK

Mar 21, 2010

upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb

[code]...

View 2 Replies View Related

Ubuntu Installation :: Dual Boot XP And Kubuntu 10.10 GRUB?

Nov 20, 2010

My system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:

sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).

I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.

View 9 Replies View Related

Ubuntu Installation :: Dual Boot With XP From The GRUB Menu?

Feb 23, 2011

I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?

View 9 Replies View Related

Ubuntu Installation :: Dual-Boot - Grub Not Loading

Aug 1, 2011

I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)

When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?

Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).

View 2 Replies View Related

Ubuntu Installation :: When The GRUB Boot Menu Starts Up There Is An Option For Win 7 Boot But It Will Not Boot Windows?

May 2, 2011

I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are

Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved