Ubuntu Installation :: Gnucash Doesn't Display Account After 11.04 Upgrade

Apr 30, 2011

i have a large data file for gnucash of several years in age. when i did the upgrade, gnucash starts and loads, and the main account appears to load, but there is nothing displayed. just an empty gray space where the alternating colors of the ledger should be.the account listing loads, and i can view other smaller accounts just fine. but the main ledger does not display. however, if i click on some areas of the screen, it will display what i assume is the underlying text in the bottom status bar.

and when a window or some other graphic element 'over writes' any area, some remnants of the former image remain.

View 9 Replies


ADVERTISEMENT

Software :: GNUCash Crashes - Cannot Open Specific Account

Mar 12, 2010

I have been using gnucash for years and never had any problems but now every time I try to load it it crashes upon trying access an account. The sequence is that it first tells me it cannot get a lock on ANY of my files reporting that they may be in use by somebody else; this is impossible. However when I do load it the initial list of accounts installs.

However when I try to open any specific account Gnucash crashes. I am using Mepis 8.0 and Gnucash 2.2.6 directly from the repositories. I have removed it and reinstalled it but to no avail. I have tried to install version 2.2.9 as a tar file but I keep getting dependency errors despite the fact the files are installed.

View 1 Replies View Related

Ubuntu Installation :: No Display After Upgrade 9.10

May 8, 2010

I upgraded ubuntu 9.10 from the update manager- it had a couple of problems, and now when I boot there's no display- I'm pretty sure it's just the graphics driver since it loads up and plays the login sound.I'm currently running off a CD version of 9.10 and when I chroot the drive with 10 and sudo apt-get upgrade it says there's some stuff that depend on fglrx, and that it's not there.There were proprietary drivers installed before the upgrade- Is there an easy way to just run with non-proprietary drivers? Or to install non-proprietary drivers to another drive?

(I don't really know what I'm doing, if I need to boot to recovery mode and do stuff could someone please tell me how to do that? The only info I can find is maybe possibly press Esc during the os boot and that doesn't seem to work for me)

View 2 Replies View Related

Ubuntu Installation :: Display Doesn't Wake Up After Suspension

May 14, 2011

I upgraded from 10.11 to 11.4 and as far as I can see most things work as they did before. However, I have my machine to "go to sleep" (is that suspension or hibernation?) after 2 hours and when I, now after the upgrade, press the "wake up button" the machine fires up but the screen remains down. Ie, the screen is actually not receiving any signals from the computer? Any setting I can change? It worked fine with 10.11!

View 1 Replies View Related

Ubuntu Installation :: No Display After Upgrade To 9.10 (ATI Radeon)

Jan 23, 2010

I upgraded my HP Elitebook 6930p from 9.04 to 9.10. When X starts the display shows random lines. I can boot into "recover" mode from GRUB and get the command prompt. 9.04 worked fine so I'm pretty sure it's not the video card. The video card is ATI Radeon HD 3400.

View 4 Replies View Related

Ubuntu Installation :: Shaking Display After Upgrade

Sep 10, 2010

I have a problem since an update some weeks ago but I cannot remember which one, because I thought it would get fixed so I didn't revert back.The display shakes very often depending on the type of window displayed and I think it has to do with the hardware driver (nvidia 185 restricted). Was there an update not long ago?

You can look at the problem there:http://www.......com/watch?v=Es0CVNmXGJ8.I had to record it with an external camera because using GTK-recordMyDesktop the recording is flawless.As you can see sometimes it's almost unusable.It has nothing to do with compiz or emerald or awn or any effect, because even with everything turned off I have the same problem.

View 3 Replies View Related

Ubuntu Installation :: Upgrade To 10.10 Root Can't Open Display

Oct 12, 2010

I just upgraded from 10.04 to 10.10.After the upgrade I can't open any GUI programs running as root.

Or using gksu I just get the password prompt and then nothing happens.Same thing if running from the System->Administration menu.This is the same for all programs, not just Synaptic.Any idea of how I can debug this issue?

View 9 Replies View Related

Ubuntu Installation :: Garbled Display After Upgrade To 2.6.32-* Kernel?

Feb 4, 2011

I used Ubuntu 9 (Karmic Koala) for some time with no problems. When I upgraded to Ubuntu 10 (Lucid Lynx) I ran into graphics issues.After I log in, the screen scrambles (a purple/green mess)--impossible to decipher anything, although I can get out by marking the spot on the screen to click for a restart, so Linux is working behind the scenes.If I start in recovery mode with basic graphics, I have no problems at all (other than limited functionality). If I start the old 2.6.31-22 kernel, I see a bunch of "unmountable" errors in the startup script, but I can use Linux normally with no apparent problems. I'm running an IBM ThinkPad A30 with ATI Mobility graphics. Just to reiterate, the screen looks fine until I log in, at which point it goes bonkers. I've tried lowering the resolution, to no avail. I'm not running any proprietary drivers. What do I need to change in order to fix this?

View 2 Replies View Related

Ubuntu Installation :: Natty - With Graphics Driver - Gnucash And Shutdown

May 4, 2011

I just did an install of Natty into a separate partition and incurred several problems. I have a Dell-DXP061 with 4 GB of memory and an Nvidia GForce 7300LE and a Dell 27in. monitor at a resolution of 1920x1200.

Initially it booted in to Ubuntu Classic as expected due to needing a proprietary video driver. So the first thing I did was to install the recommended Nvidia driver and attempted to reboot. It would not start either Unity or Classic. So I did a re-installation and then selected the experimental open 3D driver and was then able to bring up the system in both Unity and Ubuntu Classic. I installed a number of programs including cairo-dock, which I really like, emacs23, and gnucash. I have used gnucash for years and consider it a necessity. However, the Natty version will not display correctly the "gnucash-data" file I created with version 2.2.9 that I have been running on 10.10. This is almost a show stopper for me.

When I try to do a restart, the screen goes black, "Ubuntu" appears with the little dots, three of the dots change color and the system hangs. The system only stops when I hold the power button to effect a complete power outage. Interestingly the LiveCD did not seem to have a problem with restart.

I can see how a causal user might like the Unity interface, but I don't think that I am interested. I guess I will stick to gnome for a while, at least until Gnome3 and then I am not sure where I will go.

View 2 Replies View Related

Ubuntu Installation :: 10.04 Terminal/Boot Splash Doesn't Display Correctly?

Apr 19, 2010

I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.

View 9 Replies View Related

Debian Installation :: Can't Install Gnucash 2.4.7 On 6 Xfce Environment

Jul 8, 2011

I can't install gnucash 2.4.7 on Debian 6,xfce environment with did not install the gnome environment

View 4 Replies View Related

OpenSUSE Install :: Don't Want To Display Account Names?

Sep 22, 2010

How can I turn off the login names on the welcome screen? I don't want to display account names.

View 5 Replies View Related

Fedora :: Screensaver Doesn't Kick In Or Display Doesn't Suspend/sleep?

Jul 25, 2009

Anyone noticing intermittent problems with the screensaver not kicking in or the display not sleeping? This is in gnome under F11.I have the Power Management Preferences set to put the display to sleep after 30 minutes of inactivity and gnome screensaver is configured for 5 minutes idle time.On a regular basis, I'll leave my computer come back anda) the screensaver hasn't kicked inorb) the screensaver kicked in, but the power management features didn't kick in to put the display to sleep.It seems to be an intermittent problem and usually it goes away after I restart X, but then at some point it comes back. In the past, I've gotten in the habit of being logged in for weeks/months at a time but I find that I can't go more than a few hours without logging out and back in or else the screen won't go to sleep.

View 14 Replies View Related

Ubuntu Installation :: Login Doesn't Start After Upgrade

Mar 16, 2011

I have dell d630- 64bit version So i upgraded to the latest alpha and my system gets stuck at: as far as "Checking battery state" and hangs, i can login to the separate console and run startx but then no window manager is comming up so again, another ubuntu upgrade and another failure

View 2 Replies View Related

Ubuntu Installation :: Monitor Doesn't Work After Upgrade?

Apr 29, 2011

Before ubuntu can even boot I get this on my monitor

Out of range Please set to 1280x1080 @ 60Hz

I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.

View 2 Replies View Related

Installation :: UX Server Doesn't Start After Upgrade To Ubuntu 10.04 / Fix It?

Jun 14, 2011

Recently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...

View 2 Replies View Related

Ubuntu :: Ssh Doesn't Work When Log Into Other Account

Jan 12, 2010

ssh works fine on root but when i log into my other account, the ssh doesn't work, it just times out when i putty it. I used this to try and start it from terminal in my reg acc, and then as the su.

sudo /etc/init.d/ssh start
After that didn't work i did this
sudo apt-get remove openssh-server
sudo apt-get install openssh-server
sudo /etc/init.d/ssh start

and still nothing. I have no clue why it only works on root and no other accounts.

View 9 Replies View Related

Ubuntu :: Gwibber Doesn't Let Add Any Account On 10.4 LTS?

May 20, 2011

I just added the ppa for gwibber stable and I installed the Gwibber 3.0.0.1 because the default gwibber on ubuntu 10.4.2 LTS doesn't let me add twitter account. Now, after launching the application,

View 6 Replies View Related

Ubuntu Installation :: Upgrade - Can't Read Anything - Touchpad Doesn't Work

Feb 8, 2010

This weekend I did a distribution upgrade to Karmic, but it didn't go very well. Upon reboot, I see a white ubuntu logo on a black screen. I hear the speakers pop, and the screen flashes several times, sorta like the blank screen is maybe changing video modes. After a while I see what I think is garbled text but is unreadable, and it looks like I can log on even though I can't read anything. Now, booting into recovery mode gets me to a readable prompt. There are no upgrades to apply. Typing gdm from here gets me to the desktop just fine. Also when booting, if I choose an earlier kernel the system boots fine also, except the touchpad doesn't work.

View 1 Replies View Related

Ubuntu Installation :: Update-manager -d Doesn't Have Upgrade Button

Mar 31, 2010

I'm on a fully updated and upgraded 9.10, and when I do update-manager -d, I don't get the button to do an upgrade to 10.04! What could cause this? I've tried the -d, -c, --check-dist-upgrades, --devel-release, -p, --proposed, and --dist-upgrade. I'm completely up to date on 9.10, but I want to upgrade to 10.04!

View 7 Replies View Related

Ubuntu Installation :: Forced Upgrade From 7.10 On Sparc - Doesn’t Recognize The Cd Rom

Aug 14, 2010

Got kernel panic when upgradeing from 9.04 to 9.10... Have a tough time with this sparc server. On newer disto it doesnt regognize the cdrom in installation what will result in no install. I tried all trix I found on internet about this issue but none of them did it for me. So I went back in versions. When I come to 7.10 gutsy everything seems to work, so now everything is up and running.

But now I want it back on version 9.04. Last time (a year ago) I did the same thing, and just do-release-update to current version. Now that doesnt work. Maybe becourse I need some updates to gutsy, and the gutsy repositorys is not available anywere. how I can pass this upgrade to 8.04? I set the APT::Get::AllowUnauthenticated true; to pass this far...

View 9 Replies View Related

Ubuntu Installation :: 10.10 Upgrade To 11.04 Mouse Doesn't Work--only The Keyboard Does?

Jun 24, 2011

I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?

View 2 Replies View Related

Ubuntu Installation :: 10.04 LTS AMD64 - Upgrade To 2.6.32-33 Doesn't Boot Anymore

Jul 18, 2011

This morning I switched my machine and the Update Manager prompted me to upgrade.So, as usual I did it. After upgrade it asked me to restart. Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.

View 9 Replies View Related

Ubuntu :: Empathy Doesn't Connect To MSN Account

Oct 21, 2010

Empathy used to work perfectly, it would connect to my account well. Now, for some reason, it just stays connecting with the little rolling circle thing next to the status. My account works on Pidgin though.. What could this be?

View 2 Replies View Related

Ubuntu :: Empathy Doesn't Work / How To Set Up Account

Jan 30, 2011

Im trying to set empathy up with my msn account. I have added the account but it just seems to lag and take a very long time to do nothing! I haven't been able to connect to my msn account yet. Can someone walk me through how to set up my account?

View 3 Replies View Related

Ubuntu Installation :: Upgrade 9.10 To 10.04: Keyboard Doesn't Work On X Login Anymore

Apr 30, 2010

Just before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?

View 7 Replies View Related

Ubuntu Installation :: Upgrade 10.10 Installed Through Wubi To 11.04 - Windows Doesn't Work

Mar 25, 2011

I want to upgrade Ubuntu 10.10 installed through Wubi to 11.04. Now, Windows doesn't work. I can't upgrade Ubuntu by it because it is impossible to download files. Can I upgrade it without connecting Ubuntu to the Internet and starting Windows?

View 5 Replies View Related

Ubuntu Installation :: Infra-red Remote Control Doesn't Work After Upgrade To Lucid

Apr 30, 2010

I've just upgraded my web/tv setup from 9.10 to lucid and everything seems to be working apart from my infra red remote control.The remote was working fine in 9.10 and was used to control mythtv-frontend however after the upgrade the remote appears to be controlling ubuntu natively, i.e. right left up and down control what is selected on the desktop where as previously the remote was set to only work within mythtv. Whilst native support for my remote control is muchly appreciated(if that is what this is) where can I configure the controls so that it is usable again?

View 1 Replies View Related

Fedora Installation :: Upgrade Option Doesn't Appear In Boot Menu

Jul 2, 2009

I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.

View 3 Replies View Related

Ubuntu :: Upgrade To Thunderbird 3.1 Locks Account?

Feb 26, 2010

I just upgraded from TB 3.0 to 3.1 and now I can't access my email account. (It has a lock on the account icon and there are no subfolders available -- see attached.)
What could be wrong?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved