Ubuntu Installation :: Errno 13 Permission Denied: U'C:\ubuntu\install\ubuntu-10.10-netbook-i386.iso

Apr 11, 2011

I recently got interested with with OS.. So I downloaded wubi in Ubuntu website. I opted for the Ubuntu Netbook Edition as am using a lappy. However, halfway through finishing download I got an error. The log shows:

OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.10-netbook-i386.iso'

View 1 Replies


ADVERTISEMENT

Red Hat / Fedora :: Setup Iptables - IOError: [Errno 13] Permission Denied

May 26, 2011

I am trying to set up iptables, I get this error message and dont' know what to do.

[Code]...

EDIT. I did chmod 777 /etc/sysconfig/iptables.old and it still doesnt work

View 9 Replies View Related

Ubuntu Installation :: [Errno 13] Permission Denied: U'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso'

Jun 29, 2010

I'm new to Linux, so I decided to try using Wubi to get started. THe problem is, when it finished installing 10.04, I got this message: OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso' Is there any way around this? It might just be that overly restrictive thing called Vista (which I have the bad luck to be using). I was considering getting a USB drive for Ubuntu anyway..

View 1 Replies View Related

General :: Xinit: Permission Denied (errno 13): Unable To Connect To Xserver

Jul 7, 2011

I am unable to start my xserver, using the startx command that I have been using for the past 5 years. It goes to the blue loading screen with the x for a cursor, hangs there for about a min or so then goes back to the command screen. I get an error:

Code:

giving up. xinit: Permission denied (errno 13): unable to connect to xserver waiting for xserver to shut down xinit: Server error.I have tried logging on as root and trying startx again. Same error.

View 2 Replies View Related

Ubuntu :: Error: "Note: Cannot Open TUN/TAP Dev /dev/net/tun: Permission Denied (errno=13)"

Mar 14, 2011

I have a problem setting up a TUN interface for OpenVPN. Running OpenVPN gives me this error: "Note: Cannot open TUN/TAP dev /dev/net/tun: Permission denied (errno=13)"

Which i tracked down to: "WARNING: Couldn't open directory /lib/modules/2.6.18-164.15.1.el5.028stab068.9: No such file or directory" (if i run /sbin/modproble tun). Does anyone know how to fix this?

View 1 Replies View Related

Ubuntu Installation :: Cannot Instal 10.10 Netbook Remix I386.iso

Oct 20, 2010

When I complete the download of the platform on USB it says error in downloading "casperfilesystem.squashfs." I go ahead and try to go through the steps of running unbunt, since it download on the USB, then at the last moment it says cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

View 1 Replies View Related

Ubuntu Installation :: 4.10 - Getting Permission Denied Error

Jul 19, 2010

I want to install Ubuntu 4.10. But I get error permission denied face. I do not have CD-ROM. How can I do this?Is it possible to install via USB? [URL]

View 2 Replies View Related

Ubuntu Installation :: Getting Permission Denied When Installing?

May 2, 2011

I made an my iso CD pop it into my laptop and install it Half way into the installation it goes premission denied c:/windows/users/ME/apptemp/local/temp/wubi11.04rev197 What am I doing wrong??

View 3 Replies View Related

Ubuntu Installation :: 11.04 Permission Denied Executing Over NFS?

Jul 20, 2011

We've run into an interesting issue in our environment:

If user joe1 has an executable that is NFS mounted, owned by him and permissions are set such:

--x--x--x a.out

he can't run it:

./a.out: Permission denied.

if he moves it to the local machine, say /tmp, it works fine with the same permissions.

joe can execute the file if he changes the permissions to r-x--x--x

this behavior seems to exist on the 11.04 clients, but not the 10.04 clients.

View 1 Replies View Related

Ubuntu Installation :: Windows Vista - 9.10 Installation Error - Permission Denied?

Jan 4, 2010

I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.

View 6 Replies View Related

Ubuntu Installation :: Sources.list - 13: Permission Denied?

Jan 25, 2010

Appear sometimes ago a message: E: Opening /etc/apt/sources.list - ifstream::ifstream (13: Permission denied) I'm trying update my computers but I don't get.. Please.. All my docs, movies and pictures are in this PC... What Can I Do to fix?

View 3 Replies View Related

Ubuntu Installation :: Permission Denied While Trying To Open /dev/sda1?

Mar 25, 2010

When, from the live cd I try to execute

Code:
e2fsck -y /dev/sda1
All i get is:[code].......

View 3 Replies View Related

Ubuntu Installation :: 10.10 - Amanda 3.2 Default Permission Denied

Dec 9, 2010

I'm trying to install Amanda 3.2 on Ubuntu 10.10 (Maverick) using Ubuntu 10.04 deb package. The installation was successful using the dpkg command. The problem crops up when configuring such amanda. When creating a user amandabackup using passwd amandabackup and then enter in it through su - amandabackup a permission denied problem comes up. When enter amserverconfig Dailyset 1 etc etc the server response with :
amservingconfig: critical (fatal): Cannot create debug file "/var/log/amanda/server/amserverconfig.2010120307947.debug": Permission denied and continues
The permissions are set to rw 1 amandabackup backup. I can't understand why it's telling me permission denied each time.

View 3 Replies View Related

Ubuntu Installation :: 11.04 - Failed To Mount (Permission Denied)

Apr 29, 2011

I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.

View 1 Replies View Related

Ubuntu :: ANSYS Installation In Terminal - Permission Denied

Jun 16, 2011

I have Ubuntu10.10 in my HP-laptop. I am trying to install ANSYS. There is an install file in setup. When I try to give install in terminal, being in the same directory it says, command not found. I tried ./INSTALL, it says "bash: ./INSTALL: Permission denied". I also tried from my home folder with full path for the install file, as the readme file says, "To install, enter the full path to the installation program on the media or to the downloaded installation files". I don't know what to do. I have these setup file in my external hard drive.

View 6 Replies View Related

Ubuntu Installation :: Unable To Complete 10.04 Install 'Permission Denied'

May 30, 2010

I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:

[code]...

View 1 Replies View Related

General :: Bit Torrent Client Ubuntu Netbook Edition Urlopen Error - Errno 111

Jun 13, 2011

I'm new to ubuntu and trying to use bit torrent, while installing there was an error message, but the program was still shown as installed. When I tried to use it i got this error "urlopen error [Errno 111]".

View 6 Replies View Related

Ubuntu Installation :: Etter.dns - Change The File And Try To Save - Permission Denied

Apr 18, 2010

I'm trying to configure my /usr/share/ettercap/etter.dns for dns spoofing with ettercap. but when I change the file and try to save it ubuntu says permision deneight Even when I try doing this from the terminal with sudo. It seems there is know way to change the file.

View 4 Replies View Related

Ubuntu Installation :: Cannot Create Startup Usb-flash Drive - Permission Denied

Jan 7, 2011

An uncaught exception was raised: [Errno 13] Permission denied: '/media/e6f6ac46-4bfc-487b-9c81-aab706ead9e3/boot'

The above is the error message I get when I try to create an usb-flash boot drive. I downloaded the iso for Mint10 and use the "create startup disk" program to create the boot drive. I can see both the iso and the flash drive within the program, but when I click on "create disk" I get the above error message?

View 7 Replies View Related

CentOS 5 :: Cannot Execute The Installation Script Gives An Error Permission Denied?

Aug 11, 2009

I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.

View 2 Replies View Related

CentOS 5 :: 3rd Party Software Installation - Tar Extraction Permission Denied

Jun 10, 2010

I have 3rd party software that I need to install. It is called VNMRJ. It is packed as one .tar. I extracted the .tar to the desktop (under root) and want to start the installation. However, during the installation process, all .tar files included the the package (sub directories) can't be extracted by the installation routine. For every .tar I get the error

tar: /root/Desktop/vnmrj21b_inova_01106/code/common/com.tar: Cannot open: Permission denied
Installation of VNMR failed
tar: Error is not recoverable: exiting now
DONE: 112 KB

View 5 Replies View Related

Fedora :: Libraries MATLAB Installation - Error While Loading - Permission Denied

Jan 18, 2011

I installed MATLAB R2009a in my laptop (Fedora 14 x86-64), the installation was succesful but when I run MATLAB (in a console), appears a message: error while loading shared libraries: libut.so: cannot enable executable stack as shared object requires: Permission denied

I find a "solution", execute in a terminal: execstack -c libut.so

I used several times with differents libraries that I needed, but I run MATLAB in a terminal, MATLAB starts in a terminal, only a prompt ">>" and nothing.

View 2 Replies View Related

Ubuntu Installation :: On Windows XP As A Dual Boot Using Wubi - Error Occurred: Permission Denied

Jan 16, 2011

I'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?

View 7 Replies View Related

Ubuntu Installation :: Unable To Install Inside Windows XP - An Error Occurred: Permission Denied

Apr 3, 2011

I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:

An error occurred: Permission Denied For more information, see the log file: c:...

View 8 Replies View Related

Ubuntu Installation :: Grub Configuration Error "Permission Denied"

Jun 4, 2010

I am running Ubuntu 10.04 as a dual boot on my laptop next to Win 7. I installed using all defaults, as I am pretty much a novice user. I also put 10.04 on my desktop at home, but did not install. I am running that machine ON the Win 7 partition. My problem is that on my desktop, I get a boot option of Windows or Ubuntu from the MBR, and Windows is the default. If I choose Ubuntu, I then get the Grub menu which defaults to Ubuntu (fine, I already chose that).

On my laptop (where I did the full install on its own partition) Grub takes over, which would be fine but for Ubuntu being the default. I really want the default to be Win 7. I have read several posts, and a tutorial on changing the boot order in Grub, but when I try to access the file mentioned (etc/default/grub) I get an error "Permission Denied". I have made myself Administrator, so I should have access to everything. I know I need to change the line GRUB_DEFAULT=0 to GRUB_DEFAULT=6 to make this work, but I cannot open the file. Is there an easier way of doing this? Honestly, if you want novice users to try out Ubuntu, sending them to command line is NOT the way. The great majority of people that might be willing to try Ubuntu will run for the hills at the simple suggestion of command line. Most everything else you do is handled by an app, why not this?

View 5 Replies View Related

Ubuntu Installation :: "Permission Denied" For Sudo Operation / Why Is So?

Sep 30, 2010

A few days ago I tried to install a driver for a Brother printer (HL-5040) in terminal mode by issuing "sudo dpkg -i --force-all hl5040lpr-1.1.2-1.i386.deb" on my Ubuntu 9.10 PC.

During the process several error messages were displayed. All of them say "permission denied" to access a directory /etc/init.d/lpd. Consequently, the installation failed and Synaptic package manager does not work any more and becomes broken.

Questions: Why did I get "permission denied" as a su? How can I get around the problem so I can re-install the driver?

View 3 Replies View Related

Ubuntu Installation :: Installed Via Usb Drive And Cd - Windows Xp And Windows 7 - Permission Denied

Jun 16, 2011

I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "

The log:

Also i try this v Ubuntu 11.04 Ubuntu 10.10

View 2 Replies View Related

Ubuntu Installation :: Getting A "permission Denied" During Setup?

Feb 22, 2011

I'm getting a "permission denied" during setup.

View 2 Replies View Related

Fedora Installation :: Error: Can't Create Transaction Lock On /var/lib/rpm/.rpm.lock (Permission Denied)

Nov 22, 2010

I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.

View 2 Replies View Related

Installation :: Permission Denied \ Opened Konsole, Entered Su And Entered Root Password?

Aug 19, 2010

I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved