I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
I am having the same problem. I did delete partition trying to create a new shared fat32 one.below fdisk -l screen..I booted from live CD and tried quite a few things already...I think I need a clear direstions for it is getting annoying...
Device Boot Start End Blocks Id System /dev/sda1 1 5906 47437866+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary.
I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
I'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
I purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
I've a new format in my HDD and put win7 and ubuntu 10.04. I made a partition about 50GB so that i can get files from ubuntu to windows and the other way around.I can see that partition in windows but not in ubuntu.
I have a partition to share files between Ubuntu and Windows, sometimes it becomes read-only but it's always reversible, this time it seems completely locked, all folders even have lock symbols and I can't change any file even if I open nautilus as root.
I can use it through windows with no problems, and have tried using PySDM to modify it but it's still the same.
I am dual booting windows 7 and ubuntu 10.04 using grub. I am using a 1tb samsung hard drive. Ubuntu has 750gb and windows has 250gb. I want 500gb of my HD to be FAT32 so I can put all of my music, pictures, and videos on it. I don't have more than 100gb used on either partition.
I have done quite a bit of searching and browsing, but I can't find a good step by step guide to do this. I am guessing I need to figure out how to use fdisk?
I have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
I'd like to wipe free space on a fat 32 partition, momentary by doing
cat /dev/urandom >garbage
That stops each time the file is 4GB big, as this is the maximum supported filesize for fat32 partitions. So I redo the command, only writing now to "garbage2" or so.Is there any more elegant way to do that? Maybe by script which automatically generates new file names, until the disc is full?
I want to mount my FAT32 partition automatically on startup. It gets mounted but the problem is that all the files in the FAT32 partition are shown as owned by root. Because of that I can't paste files or write to this partition. This is my fstab file
Code: # /etc/fstab: static file system information. # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sda5 during installation
I purchased a FREECOM 1,5TB external USB-HDD and find out that there was FAT32 as FS. I windos there are not posasible to make bigger FAT32-partition than 32GB. I wan't to have windos-FS to use my work and on my freinds computers.Do you think I could format to NTFS or keep the FAT32? I don't have any big files.
I'm having difficulty making my FAT32 drive capable of read/write. I followed the instructions here (http://ubuntuguide.org/wiki/Ubuntu:Maverick#Windows_Compatibility) and added the following line to my /etc/fstab file:
Code: /dev/sda4 /media/WinD vfat quiet,defaults,rw 0 0 However, when I rebooted the drive is still read-only
I dual boot, in the process of installing Windows 7 & Fedora 13 on a new drive. Back in the day when it was risky for the newbie to read/write NTFS, I created a "shared" FAT32 partition. Even though the later Fedoras could read/write NTFS fresh out of the box, I have kept the "shared" partition for my important files (email, documents, digital camera pics).
Now that I'm installing Win7 and Fedora 13 on a new hard drive and I'm partitioning my disk, I'm scratching my head trying to decide how I should format this partition. I was considering the FAT32 again, but I'd like 50GB, not just 32. At the same time, I'm thinking of making the size sacrifice because, and maybe this is just carryover from the olden days and groundless, I have an irrational worry about using NTFS for my most important files.Maybe someone could assuage my fears. Is it just as safe, at this point, for files to be on a NTFS partition and run under Fedora as they are under FAT32?
I accidentally deleted some video files on my digital video camera, the Hard Drive is FAT32 and the videos are saved as a .mod file.I've had good success recovering files in the past with Photorec but there is no option for .mod files with this software
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
i currently have both xubuntu 10.10 32-bit and windows 7 64-bit installed on my laptop which i use mostly for college work and basic programming (i'm still learning to program).i have a 150gb partition with win7 installed, a 20gb partition with xubuntu installed and a 15gb partition with my linux home folder on, the rest of the space is unused because i thought i may need it for something else in the future.the home folder partition is formatted to etc4, i now have a need to access this data from win7 for college work, i know that windows doesn't support mounting of etc file systems so i have hit a problem.
i thought about changing the type of partition from a ect4 to fat32 but will this delete my data? or ,are there any third party software packages for windows that will allow me to mount ect4?
is there a way to recover data from a hd partition type fat32...cause ...cause right now it shows up as unallocated space..earlier i tried installing windows in a unused partition located just above this partition....i need to recover the data real soon...