An uncaught exception was raised: [Errno 13] Permission denied: '/media/e6f6ac46-4bfc-487b-9c81-aab706ead9e3/boot'
The above is the error message I get when I try to create an usb-flash boot drive. I downloaded the iso for Mint10 and use the "create startup disk" program to create the boot drive. I can see both the iso and the flash drive within the program, but when I click on "create disk" I get the above error message?
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
I have a droid phone, and I have ubuntu 9 running on it. This is done by chrooting since the phone runs a linux kernel. And it works... I have a question though. tightvncserver does work, and its able to listen on 127.0.0.1.. Its how you view your X session. So you chroot to Ubuntu, then start vncserver. Then switch back to android and login to ubuntu via vnc client. but apache, mysql, and postgresql do not work. Well. They dont seem too.. except for mysql. Mysql will start but only if you tell it not to use networking by saying skip-networking in my.cnf
Mysql says: mysqld cant create ip socket permission denied Apache2 says it can find 127.0.0.1 but doesnt actually run same with postgresql... All seem to be compiled with arm architecture. So why does tightvncwork? Why is it so special? How can it listen on the loop back (127.0.0.1) when nothing else can...
I have /proc and /dev bind to the chroot side. I can run ifconfig okay, and I can run /etc/init.d/networking start okay.. But apache2, mysql, etc have problems binding. I have removed apparmor even though technically its not running, but I removed it and its configuration files, just because I thought perhaps mysql looks at apparmor, but I doubted it.
I'm using my AntiX M8 Live CD to repair a hosed Windows installation, I downloaded ComboFix to ~/home/Desktop and now I'm trying to copy (cp) the file to /mnt/ where I have already mounted the NTFS Windows partition. NTFS3G is integrated into AntiX, right? So why am I having permissions errors?
mepis1:/home/demo# cp -v Desktop/ComboFix.exe /mnt/SwSetup/ `Desktop/ComboFix.exe' -> `/mnt/SwSetup/ComboFix.exe' cp: cannot create regular file `/mnt/SwSetup/ComboFix.exe': Permission denied mepis1:/home/demo# So far, I can read it without any errors in Terminal and navigate through the whole filesystem in ROX-Filer, Do I need to edit /etc/fstab to be able to write to an ntfs drive?
i installed Slackware 13.1 64 bits in a asus laptop and until now everything is running ok. But when i tried to mount a usb pendrive, i just can mount it as root;well, i thought there would be no problem, i will change permissions with chmod and everyone could access, read and write on it the command :
mount -t ntfs /dev/sdb1 /mnt/kingston
and making ls -l the result is :
drwx------ 1 root root 12288 Dec 8 17:20 kingston
so next i wrote (as root):
chmod 777 -R kingston
and the message was "Operation not supported" i tried also changing the ownership permission :
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
I'm getting Permission denied even though I'm putting sudo in front of the command but, instead of asking me for a pass word it just says Permission denied "then" it askes for a pass. I enter the pass and it just takes me to the
prompt. I enter the command a second time and it says Permission denied again.
I have recently bought a new laptop, installed my first linux OS on it (Ubuntu 9.10) and an external hard drive with 500GB on it for backup. For the first few days my external hard drive was working fine, but then eventually it wouldn't let me copy/move/delete stuff to and from it. So I kept trying to change the permissions but it wouldn't let me.
I figured this would be a very very common problem, so I looked up some forums to try out the methods but they didn't work. So I thought I would ask you guys for help because I am pleased with the support. I wouldn't think this would be a hard problem to solve.
I have an external hard drive that has all of my Apple Powerbook G4 files on it. I plugged in my "Journal Extended" external hard drive into my new HP laptop with Ubuntu 10.10 on it.
All of my files are on the hard drive still, however lots of them have a little X on the folders and when I try to open them it tells me I don't have permission? How can I force the permission for everything on my external? It's my own files and I can't even access them lol.
Code: # traceroute -I 184.108.40.206 Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied Note that the command was done as root. This worked in 11.3.
And yes, it works without the "-I". But it should work with the "-I". One shouldn't have to boot into Windows, just to run "tracert" there.
I installed Ubuntu 10.10 beta yesterday and most of it is working very well. However, I ran into a problem with permissions today.I have a HDD containing my home folder and a HDD containing my data folder. The HDD with the data folder is mounted on /media/data/data_1.
I made sure I had set a+x rights on the file, tried executing it as root but the permission error stayed.When I copy that same file to my Desktop folder I can perfectly execute it.When it's located on the other hard drive I can't. I tried several command line scripts and they all work when I execute them from my OS hard drive,but not from another hard drive.
I have a cron backup scheme in which I rsync, then tar, then copy files on my internal hard drives to an external (USB) drive. When it works, it works. But I often get a "Permission Denied" message for all of these tasks. how the external drive is auto-mounted so I edited the etc/fstab so that the owner of the cron job is also the owner of the external drive (I think. Unfortunately, I'm not at that machine right now (it's at work), I can't give the exact fstab line (I will post it as an update to this thread next time I am at the machine).) BUT, I still get times when the cron backup runs fine and other times I get the Permission Denied. This is a shared machine that is dual-booted, so what I *think* is going on is that when the machine is rebooted to Fedora, but nobody logs in, I get a Permission Denied for the cron backup. It seems like on days when someone has logged in as the main user and left without logging out that the cron backup runs fine.
I can't copy a few files from my pen drive. Got the files from a public computer, with windows. I use fedora 10.
cp gives the following error---> cp const1.java /home/user1/Documents/scjp cp: cannot open `const1.java' for reading: Permission denied lsattr shows this---> lsattr const1.java lsattr: Permission denied While reading flags on const1.java mount shows this---> /dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
I recently switched from Ubuntu Maverick 32-bit to 64-bit so I could compile Android's latest revision, Gingerbread.
Everything went pretty smoothly and I managed to fix most issues that was caused due to the switch.
But each time I open terminal, the following error shows up:
Code: mkdir: cannot create directory `/mnt/cgroups/cpu': Permission denied bash: /mnt/cgroups/cpu/19088/notify_on_release: No such file or directory bash: /mnt/cgroups/cpu/19088/tasks: No such file or directory
I've tried manually creating that directory as root but the error remains.
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.
Appear sometimes ago a message: E: Opening /etc/apt/sources.list - ifstream::ifstream (13: Permission denied) I'm trying update my computers but I don't get.. Please.. All my docs, movies and pictures are in this PC... What Can I Do to fix?
I'm trying to install Amanda 3.2 on Ubuntu 10.10 (Maverick) using Ubuntu 10.04 deb package. The installation was successful using the dpkg command. The problem crops up when configuring such amanda. When creating a user amandabackup using passwd amandabackup and then enter in it through su - amandabackup a permission denied problem comes up. When enter amserverconfig Dailyset 1 etc etc the server response with : amservingconfig: critical (fatal): Cannot create debug file "/var/log/amanda/server/amserverconfig.2010120307947.debug": Permission denied and continues The permissions are set to rw 1 amandabackup backup. I can't understand why it's telling me permission denied each time.
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.