Ubuntu Installation :: Backups Before Fresh Install Of Natty?

May 9, 2011

I've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?

View 4 Replies


ADVERTISEMENT

Ubuntu :: Cups Does Not Start On A Fresh Natty Install On A Samsung N150?

May 14, 2011

Code:
sudo /etc/init.d/cups restart
results in

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Gateway NV57H26u - Sounds Drivers Not Working Properly After Fresh Install Of Natty

Sep 1, 2011

Sounds drivers not working properly after fresh install of Natty.

View 3 Replies View Related

CentOS 5 :: Scheduled Unattended Backups With Alerts If The Backups Fail

Feb 3, 2011

I've been a DOS/Windows guy for 20 years, and recently became a SW test lab helper. My company uses CentOS for a lot, so I've become familiar with it, but obviously not as comfortable as I am with Windows.

Here's what I have planned:

machine: Core 2 Duo E8400, 8GB DDR2, 60GB SSD OS drive, ATI 4650 video card, other storage is flexible (I have 3 1TB drives and 4 750GB drives around that can be used in this machine.)

uses: HTPC, Network Storage, VMWare server host: SMTP, FTP server, and Web server virtual machines

I've figured out how to do much of this, but I haven't figured out how to do backups in Linux. I've been spoiled with Windows, with the built in backup system so simple to use. I find myself overwhelmed with the array of backup software, and unable to determine which to use. none of them seem to do everything I need them to do, but some come close, I think. I'm hoping someone here can help me out in figuring out which program to use and how to use it.

Here is what I need the backup software to do:
1. scheduled unattended backups, with alerts if the backups fail
2. a weekly full backup with incremental every 12 hours
3. removing the old backups when the new full backup runs, I would prefer to keep 2 weeks of backups, but that's not necessary
4. a GUI would be preferable, since my arthritic fingers don't always do as I want them to do. I typo things a lot, and the label worn off my backspace can attest to that.

View 7 Replies View Related

General :: Rsync Incremental Backups Rather Than Full Backups?

Nov 12, 2009

How do you get Rsync to do incremental backups rather than full backups? At the moment I have a script that will create a backup folder (if it doesnt already exist) then copy the source files into the backup directory with the command

rsync $VERBOSE --exclude=$TARGET/ $EXCLUDE --exclude '/Ls-wtgl1c8/**' -rt --delete $source/ $TARGET/$source/ >> $LOG_FILE

Target is where the files will be backed up to Sources is the dir(s) to be backed up Exclude files is the list of files not to backup
log file is where the output will be saved to. At the moment it only does full backups, but I would only like to do incremental, how would this be achieved? Am I missing out an option in the Rsync that is required.

View 9 Replies View Related

Ubuntu Installation :: Should Rather Do Fresh Install Of 10.04 ?

May 29, 2010

I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.

I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better

View 7 Replies View Related

Ubuntu Installation :: Fresh Install Without USB Or CD?

Oct 5, 2010

I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.

The HD partitions are
/dev/sda1 (ext4) 15gb mounted as /
/dev/sda2 (extended)
/dev/sda5 (linux-swap) 2gb
/deb/sda6 (ext4) 20gb mounted as /home

How can I do a fresh install??

View 1 Replies View Related

Ubuntu Installation :: Fresh Install 10.04 Not Starting?

May 26, 2010

I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...

View 9 Replies View Related

Ubuntu Installation :: 10.04 - No Grub After Fresh Install

Jun 8, 2010

I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.

As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.

View 9 Replies View Related

Ubuntu Installation :: Upgraded To 10.04 With Fresh Install?

Oct 2, 2010

I want to use my old home partition as home whereas currently there is a 35gb partition that was my old home and a new 'home' within /. how to make my old home recognised by my new install of Lucid.

View 1 Replies View Related

Ubuntu Installation :: Can't Get Fresh Install Of 11.04 Work

Apr 30, 2011

I trying to dual boot Ubuntu/Windows 7 on my computer. Here is my problem:

Info:
I used Wubi and ubuntu-11.04-desktop-amd64.iso.
Main OS: Windows 7 Pro 64bit
Videocard: Nvidia GT 240

Problems (underlined) as they occured:

1) Installed Ubuntu within Windows, rebooted, saw Ubuntu loading screen (with dots) and then I get graphics corruption (it's really bad I can't recognize anything in the screen).

Then I booted in recovery/failsafe graphic mode and I let the installation finish, then automatically rebooted.

2) Let it boot without pressing anything and instead of graphic corruption it boots in terminal.

Tried startx command but it says something relative to "x not found". Then I found out I had to install proprietary Nvidia drivers so I:

3) Booted again in failsafe graphic mode (in recovery mode) and tried to install it but... no internet connection.

I tried "sudo ifconfig eth0 up" and I got: eth0: ERROR while getting interface flags: No such device

NOTE: If I let it boot itself (terminal) I HAVE internet connection (found out with wget and ping commands).

View 1 Replies View Related

Debian Installation :: Netinst - Fresh Installation Of Lenny Or Squeeze (either Or) And Not Install Exim?

Feb 26, 2010

I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?

View 9 Replies View Related

Ubuntu Installation :: Natty Install, Will Only Boot Once After Install?

Apr 28, 2011

I've installed 11.04 64bit several times, and here's what happens. On install and reboot,seems to work fine. Then on 2nd boot, 2 things:1) grub has changed, the count-down counter is gone.2) will not boot in normal mode, I have to boot in reduced graphics mode, and even then only boots about 50% of the time, and then hangs on shut down.Help! I'm running 10.10, and it's got problems on my new laptop too, and was hoping 11.04 would get me where I need to be. I do NOT want to go back to windows.Some more info:Dell Vostro 3550, with Intel i3, and Radeon discrete graphics.3GB DRAM

View 8 Replies View Related

Ubuntu Installation :: Fresh Karmic Install Runs CPU At 95% To 100%?

Feb 5, 2010

Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.

But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%

View 9 Replies View Related

Ubuntu Installation :: How To Do A Fresh Re-install In Dual Boot

Mar 27, 2010

I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?

View 3 Replies View Related

Ubuntu Installation :: Can I Install Fresh U10.04 LAMP Without Suhosin

Jun 5, 2010

I'm going crazy with the problem I posted on yesterday about Wordpress not working properly on my Ubuntu systems on the LAN. http://ubuntuforums.org/showthread.php?t=1501043

After comparing results from phpinfo() with those from my public server, making a few adjustments and still seeing the same results, the biggest thing still to be tested is the Suhosin version of PHP. My public server doesn't have the Suhosin version installed. I can't figure out how to change the PHP to one without Suhosin, but I've seen some mentions of it not being installed by default on a fresh version of 10.04.

Is this true, and if so how can I build a LAMP server without Suhosin?

View 5 Replies View Related

Ubuntu Installation :: Fresh Install Not Working Correctly / What To Do?

Jul 2, 2010

I installed Ubuntu 10.04 from a Live CD today. Everything seemed to go fine, I chose to wipe the entire disk. However, it would only startup once. Now, when I turn on my laptop, all I get is a blank screen.

I had a look at my partitions with GParted on the Live CD and noticed that there was a 1 MiB unallocated space just before it. code...

View 7 Replies View Related

Ubuntu Installation :: Fresh Install Fails On Boot?

Sep 13, 2010

Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.

Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.

Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.

View 2 Replies View Related

Ubuntu Installation :: Fresh Install Doesn't Recognise HDD?

Oct 25, 2010

I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).

I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.

View 8 Replies View Related

Ubuntu Installation :: Gdm/gconf Errors After Fresh Install?

Nov 11, 2010

I did a fresh install of Ubuntu 10.10 i386 on Asus EeePC S101 (1GB RAM, 32GB SSD). On the first boot of the freshly installed system I get 2 error popups several seconds after the screen goes into black graphical mode:popup 1:

Code:
Could not update ICEauthority file /var/lib/gdm/.ICEauthority
After I close that popup, I immediately get another:

[code]....

View 2 Replies View Related

Ubuntu Installation :: Fresh 10.10 Install Radeon Hd Driver?

Dec 25, 2010

I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.

When I type fglrxinfo I receive:

X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 14
Current serial number in output stream: 14
When I type aticonfig I get:

aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!

View 1 Replies View Related

Ubuntu Installation :: Fresh Install Of 10.10 Hangs After Reboot?

Mar 30, 2011

I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.

View 7 Replies View Related

Fedora Installation :: Fresh F12 Install But No GUI

Feb 16, 2010

I recently bought an F12 DVD (from a UK supplier) which I took to be a "full distribution". But looking back on the web site it was not described as such. After booting I selected the Replace Existing Linux System option and it listed the installation of 204 packages - much smaller than the 933 packages when I installed F9.
The kernel is now FEDORA (2.6.31.5-127.fc12.i686.PAE)

My problem is that I am now faced with a very intimidating terminal. I am sure the installation did not offer a graphical interface. I have tried to get Gnome running by following the Installation Guide :-
1) 7.4.2 Booting into a Graphical Environment
I type in -gedit /etc/inittab
and I get back --bash: gedit: command not found

2) 15.3 Switching to a Graphical Login
I type -yum group install "GNOME Desktop Environment"
Response -Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.

3) Again under 15.3 - bullet point 3)
Type -/etc/inittab
Response --bash: /etc/inittab: permission denied

I have now run out of ideas. I'm sure it is not supposed to be difficult but I don't understand the implications of the command line responses. I really don't want to be condemned to a win dependency.

View 8 Replies View Related

Ubuntu Installation :: Fresh Install Of 8.10 Over 9.10 Causes Grub 'no Such Disk' Error

Jan 27, 2010

I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:

Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc

[Code]....

View 5 Replies View Related

Ubuntu Installation :: Fresh Install Which Gets Stuck At Partitions Formatting 33%?

Feb 16, 2010

Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.

View 5 Replies View Related

Ubuntu Installation :: UNR 9.10 Fresh Install On HP 110-1081tu Netbook - No Wireless

Mar 9, 2010

I just got my self a netbook. I bought the one with linux because I figured that if they sell it with linux, it's probably using h/w which supports linux. I played around with the Mi variant it had pre-installed, but it was a bit limited and slow, so I installed UNR instead.The install went fine, and UNR is really nice to use and feels faster than the Mi too which is great. However, wireless isn't working. It's got a broadcom chipset (BCM4312) which I think needs a proprietary driver, but when I use the Hardware drivers tool, it doesn't have any options to install a driver.

View 2 Replies View Related

Ubuntu Installation :: Which Partition Table Type To Use On Fresh Install?

Apr 19, 2010

Using ubuntu minimal install 9.10 for a htpc. My boot drive is a 2Gb disk on module. When using advanced install I am eventually given the option to format the drive and ultimately the option to pick what sort of partition table type. I am not sure what to pick; it appears to have msdos as a default. Here are my options:

aix
amiga
bsd
dvh
gpt
mac
msdos (default?)
pc98
sun
loop

Some appear to be obviously bad choices; but I am not sure. Any ideas on which would be a better pick for me? I have already used msdos and it seems to work fine.

View 6 Replies View Related

Ubuntu Installation :: Pixelated Plymouth After Upgrade/fresh Install?

Apr 25, 2010

I upgraded from Karmic to Lucid via Terminal, and everything is working nicely. However, after switching the desktop on, the OS loads OK up to GRUB loading, when new Plymouth is supposed to kick in. But all I get is a pixelated image. The five dots still flash correctly signalling the OS is loading. Apart from that, I did not notice anything else wrong.

Just to check whether it was the upgrade process to have gone wrong, I did a fresh install of Kubuntu RC, this time. As soon as I inserted the live CD, however, I could tell the end result would be the same, for the same pixelation appeared while the CD was loading. And in fact, after installation, I got the same problem (see uploaded photo). So, I'm guessing, maybe it depends on my graphic card? I'm on a Matrox G450, which has always worked fine (for example, on Kubuntu it uses kwin without a hiccup). I'm currently on Kubuntu, but the issue occurs both on it and Ubuntu, where Compiz is deactivated (don't even know if that matters), and I'm only on Metacity. If Plymouth can't be correctly displayed by my card, shouldn't it have a sort of fall-back mechanism allowing users like me to have a close-to-normal experience?

View 2 Replies View Related

Ubuntu Installation :: 10.04 Fresh Install On Laptop - Blank Screen

May 1, 2010

My laptop: MSI AMD Athlon 64x2 Nvidia GeForce GO 6100.

I've done a fresh install of Ubuntu 10.04 and I end-up with a blank screen. I've also tried a fresh install of Xubuntu 10.04 and Kubuntu 10.04 and I get the same blank screen.

Ubuntu 9.10 was working perfectly though. So what do you think happened?

I installed the Ubuntu 10.04 livecd on my desktop and it works perfectly so I think it is not a burning problem.

View 5 Replies View Related

Ubuntu Installation :: Fresh Install 10.04 - Unable To Boot One Of OS (Mint)?

May 10, 2010

I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.

Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.

Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please

[Code]...

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved