Ubuntu Installation :: Amanda Client Install On Karmic

Feb 7, 2010

I have looked many places for good tutorial on configuration of amanda client with Karmic, but none of them are good enough. I basically got following message no matter what I change in Client side.

1. I am using 64-bit Ubuntu Karmic client with 2.5.2p1 amanda-client with xinetd.

2. The user is backup, group is backup.

3. The config file is located at /etc/amandahosts, and /var/backups/.amandahosts and /var/lib/amanda/.amand ahosts using soft link to the /etc/amandahosts file.

4. /etc/amandahosts file have following line.192.168.0.14 backup amdump.The 192.168.0.14 is server IP address.

View 1 Replies


ADVERTISEMENT

General :: Amanda Client Conf Errors - Info Dir /var/log/amanda/intra/curinfo: Does Not Exist

May 23, 2011

when i typed command /usr/sbin/amcheck intra on client side i got following error.(expecting a new tape)

NOTE: info dir /var/log/amanda/intra/curinfo: does not exist
NOTE: it will be created on the next run.
NOTE: index dir /var/log/amanda/intra/index: does not exist
NOTE: it will be created on the next run.

View 1 Replies View Related

OpenSUSE :: How To Install Amanda Client 3.2

Oct 23, 2010

I'm trying to install the client but getting failed dependencies:

libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586

where to find those files and how to install them? I'm running OpenSuSE 11.1

View 6 Replies View Related

Ubuntu Installation :: 10.10 - Amanda 3.2 Default Permission Denied

Dec 9, 2010

I'm trying to install Amanda 3.2 on Ubuntu 10.10 (Maverick) using Ubuntu 10.04 deb package. The installation was successful using the dpkg command. The problem crops up when configuring such amanda. When creating a user amandabackup using passwd amandabackup and then enter in it through su - amandabackup a permission denied problem comes up. When enter amserverconfig Dailyset 1 etc etc the server response with :
amservingconfig: critical (fatal): Cannot create debug file "/var/log/amanda/server/amserverconfig.2010120307947.debug": Permission denied and continues
The permissions are set to rw 1 amandabackup backup. I can't understand why it's telling me permission denied each time.

View 3 Replies View Related

Ubuntu Servers :: Amanda Backup Lucid Lynx 10.04 Installation?

May 11, 2010

After my 8.04 debacle here:I basically gave up on trying to write an install guide for Hardy and Amanda. Others had done it better and with how muddled I was by the end of getting a working server, I wasn't sure I could repeat it.Now in Lucid, I've managed to get another working amanda server going, I'm fairly sure I can repeat it and but I question:Installation with 'apt-get install amanda-server' uses the user backup in the group backup.Installation of the ZWC client uses the user amandabackup. while thankfully ZWC has included reg keys:

HKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install BackupUserHKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install RecoveryUserto change the user on the client, this is messy, requires regedit (which normally is locked out by group policy), editing the service in service.msc and creation of a new user account named backup in addition to the installer's default on each client.The actual question is:1) Is there a reason for the use of backup:backup? (rather than amandabackup:disk or amandabackup:backup)
2) Is there any sort of flag that could be set, script to change the user within the repo atinstall time.Or generally an easier way of doing this than compiling each time I do an install.

View 1 Replies View Related

Ubuntu Servers :: Login With Ldap Account From Client (karmic)?

Jul 11, 2010

how to login with ubuntu ldap server account from ubuntu client(karmic). Ubuntu server and client setup is done properly but not knowing how to login to ldap server graphically from ubuntu client. I don't want to login via SSH

View 2 Replies View Related

Ubuntu Security :: Unable To Install Amanda On Any Computers Or Server And The Port Is Not Forwarded By Modem Or Router?

Nov 17, 2010

I did a port scan on my server from outside my network and saw that port 10080 AMANDA is open.Amanda isn't installed on any of my computers or my server and the port is not forwarded by my modem or router. So why is this port open and how can I close it?

View 6 Replies View Related

Ubuntu Installation :: Gutenprint Can't Install In Karmic 64

Feb 8, 2010

This was my first attempt at compiling a program from source. Maybe I should have picked something easier but I am trying to install gutenprint (formerly gimp print)so I can use my new Epson scanner/printer.Should I remove this thing and start over?

View 1 Replies View Related

Ubuntu Installation :: Karmic Freezes During Install?

Feb 20, 2010

Ubuntu Karmic worked fine on my computer when it was first released but now doing a fresh install on my computer is totally impossible. The hardware is all the same.If I attempt to install from Live mode - karmic freezes when it's configuring Apt and ubiquity-dm crashes when installing direct from boot.I have switched to Mint but I would like to go back go to Ubuntu.

View 3 Replies View Related

Ubuntu Installation :: Fresh Karmic Install Runs CPU At 95% To 100%?

Feb 5, 2010

Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.

But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%

View 9 Replies View Related

Ubuntu Installation :: 9.10 Karmic Won't Install On IBM Intellistation 185 PowerPC

Feb 10, 2010

I'm a big convert on using Ubuntu on my x86/x64 machines.I have a nice IBM Intellistation 185 Power PC (ppc) with dual 970 processors and 8gb of ram (and 3 SCSI 300 MB drives).I tried to install Ubuntu 9.10 on it (the PPC distro) and it gets to the boot prompt, asks me how I want to install (I can choose "live" or "install", etc..). No matter which option I choose (I've tried them all) it hangs after trying to start the kernel at "returning from prom_init".

NI've also tried other distros to see where that got me - Debian does the exact same thing as Ubuntu (which makes sense). Yellow Dog Linux actually will install and run fine(I'm writing this from Firefox 3 in YDL). Since YDL works, I'd think that a version of Debian/Ubuntu should be able to work.Any ideas on how to debug this and find out why Ubuntu won't install (or even run the Live CD?)

View 6 Replies View Related

Ubuntu Installation :: Install Karmic Koala To HDD Via USB Drive?

Feb 11, 2010

I want to install Ubuntu to HDD via USB drive but I can't see my HDD. Only the USB drive is there. I don't have any CD left to burn the ISO, so USB drive is my only choice.

View 4 Replies View Related

Ubuntu Installation :: Karmic Koala 9.10 DVD Install Server Edition?

Jan 3, 2010

I bought a magazine "Ubuntu User" that comes with the 9.10 DVD (32- & 64-bit) to avoid heavy download.

1. What is the biggest benefit of the DVD versus the CD ? Having more software on the disc right ? But how can I install additional SW without downloading ?
2. I want to install a Home Server from the DVD but I don't know how to select the server edition to install ? Do I still need to download the CD image for the server edition ? I want to be able to select one or more of the automatic server installation scripts e.g. LAMP.

View 2 Replies View Related

Ubuntu Installation :: Conemplating A Karmic Install With Software RAID 1?

Jan 26, 2010

I'm running a triple-core AMD 32-bit CPU, with two matched hard drives in a software RAID 1 configuration. The system is single-boot, running Hardy only. I have no Windoze compatibility issues to impede me. In some recent posts, I discussed my desire to add a few non-standard applications to Hardy. Well, it hasn't been working for me. I've succeeded in breaking my standard Python 2.5 installation, and the Python 2.6 that I was trying to install is also broken. After asking questions in various Python forums and not getting answers, I'm starting to think about my alternatives.

I have backed up all my hard-drive data, and downloaded Karmic. I'm running from the Live CD. I am considering a clean install, though of course I would save a lot of time if I could just upgrade.

Before I leap, I see one possible problem: Karmic has failed to mount any of my hard drive partitions, as RAID or otherwise. Should I worry? When I upgraded from Dapper to Hardy on an older (non-RAID) machine, I recall that my hard disk mounted from the Live CD just fine.

Also, am I correct in understanding that Karmic is RAID-aware right out of the box? I'm wondering if I'll have to set it up manually again. That took me a while. By the way, I didn't set up separate partitions for boot, root and home (stupid me). Can I do that after the fact during an upgrade?

View 4 Replies View Related

Ubuntu Installation :: Clean Install Of Karmic - Monitor Out Of Range?

Jan 30, 2010

I've just installed Karmic and get an Out Of Range message on my monitor when starting.I had to use the alternate install in order to get Karmic on there in the first place.I have an Nvidia GeForce 7600 GS, and a BenQ FP767-12 TFT.

Output of lspci;01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)Not sure how to get my xorg.conf as I can only get to a shell. Here are (what I think are) the important bits;

Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen0" 0 0
EndSection
Section "Module"

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Grub Failing Completely On New Karmic Install?

Feb 19, 2010

I just installed Karmic Koala on one of my hard harddrive. The other disk has Windows XP. Previously I had a working dual-boot setup, but after problems with Ubuntu I reinstalled it. On booting, I get the following:

Code:
Grub Loading stage1.5
Grub loading, please wait...
Error 2

There is no Grub menu which might allow me to drop to a Grub prompt and evaluate. This occurs whether I boot with the Ubuntu harddrive or re-set the BIOS to boot with the Windows harddrive. If I boot with a LiveCD, I see that both my Ubuntu and Windows harddrives exist and are readable; the Ubuntu was indeed wiped clean and reinstalled; the issue is with the boot process. How can I set this up to boot?

View 9 Replies View Related

Ubuntu Installation :: Need Karmic Server Install CD With Latest Updates

Feb 21, 2010

On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?

View 1 Replies View Related

Ubuntu Installation :: Unable To Install Karmic On Dell 1464

Mar 4, 2010

I am unable to install karmic on my dell inspiron1464 laptop. It has core i3 processor n 2 gb ram with windows7 already installed. I had installed karmic on my pc n it didn't gave any problem but when I am trying to install it on my laptop it is just showing the try ubuntu n install ubuntu options and when I select the option to install it is showing blank screen n after sometime even the cd stops working n I have to reboot again. I want to install karmic on my laptop with dual boot option wit windows 7.

View 9 Replies View Related

Ubuntu Installation :: Install Karmic On Laptop That Has HP's On Chip OS Installed?

Mar 19, 2010

Has anyone tried to install Karmic on a laptop that has HP's new Linux on a chip OS installed? I think it's a scaled down Splashtop desktop and at least a portion of the OS is hardware based. I sure wonder what would happen if/when I try to install grub and Ubuntu.

View 7 Replies View Related

Ubuntu Installation :: Karmic (wubi Install) Won't Boot After Dist-upgrade?

Jan 11, 2010

i have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.

I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?

Does anyone here know wtf happened? Was there a bad upgrade or something?

View 3 Replies View Related

Ubuntu Installation :: Vista / Dell XPS Won't Install Or Boot From Karmic Disc

Jan 17, 2010

I've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.

View 2 Replies View Related

Ubuntu Installation :: Grub2 Doesn't Detect WindowsXp After Karmic Install

Feb 15, 2010

I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.

The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.

But now the problem is, GRUB2 fails to detect the Windows XP installation.

Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?

The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.

View 9 Replies View Related

Ubuntu Installation :: Install Karmic Xen DomU On Etch Dom0 Via Debootstrap?

Mar 10, 2010

I have an etch-based Xen server that has several Xen domU's on it. All the domU's are etch or lenny based, but I'd like to install a karmic guest. I use xen-tools to install my domU's - e.g., xen-create-image --debootstrap <etc.>After much googling, I've found bits and pieces of info that have gotten me closer to the goal, but the debootstrap script I have is for hoary (I think etch came with this), and I'm pretty sure this won't work.

If you have been able to successfully install a Karmic guest on an etch or lenny host, I'd be very grateful for pointers.

View 1 Replies View Related

Ubuntu Installation :: Karmic And Lynx Both Freeze On Install / Screen Gets Glitchy?

Jun 2, 2010

I have not been able to install a linux distro since 9.04. Karmic and lynx both freeze on install. (screen gets glitchy) I am a total noob when it comes to anything beyond installing.

Opteron 165
DFI lanparty ultra-d
2gb gskill
EVGA 7800gt

View 3 Replies View Related

Ubuntu Installation :: Grub - Setup: Warning: Attempting To Install GRUB To A Partition Instead Of The MBR - Install - Lvm - Luks - Raid - Karmic Server

Mar 27, 2010

I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]

If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.

Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'

Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.

View 4 Replies View Related

Ubuntu Installation :: Install On Client Device That Does Not Have CD / DVD Drive

Jul 15, 2010

I need to install Ubuntu on a client device that does not have a CD/DVD drive. It's on the same network and I'd like to be able to insert the Ubuntu CD into my desktop linux machine and install the OS onto this other device remotely.Is there way to do this easily? The client device is a barebones. There is nothing on it and I want to use the entire partition for this.

View 1 Replies View Related

General :: AMANDA For PowerPC Processor

Jun 11, 2010

I read that AMANDA is only for Intel processors, but I have a PowerPC processor and I want to install AMANDA.Someone said that I have to find the distro of my RH and there should be AMANDA packages available.

My distro is: Red Hat Enterprise Linux AS release 4 (Nahant Update 7)Where can i find AMANDA for my distro??

View 4 Replies View Related

General :: Libcurl.so.3, Installing Amanda Onto RH?

Jun 2, 2010

I am trying to install AMANDA onto a RH Linux4 client, but when I type in: rpm -i amanda-backup_client-2.6.1p2-1.rhel4.i386.rpm

I get the error:
libcurl.so.3 is needed by amanda-backup_client-2.6.1p2-1.rhel4.i386
Suggested resolutions:
/var/spool/up2datecurl-7.12.1-11.el4.ppc.rpm

View 4 Replies View Related

General :: Restoring RH4 Using AMANDA - Will It Restore OS

Jun 4, 2010

If I want to restore an full backup of AMANDA, will it restore the OS along with the files or does it just restore all the files in /

View 2 Replies View Related

Server :: Red Hat 5.5 - Amanda (or Alternative) Backup

Jun 6, 2010

I'm fairly competent with Linux at this stage and as we have just installed a new Red Hat 5.5 Server to host our DB at work it has basically fallen to me to sort everything out. The only thing I'm not 100% on is a backup strategy at the moment. Basically, the server / DB is not that big and as such we will be doing a full backup every night of the whole file system.

As it is there are several LVM partitions across several disks (these are all virtual both on the SAN and as a virtual machine). My question is what would be the best way to create a full backup overnight of the whole server including all the partitions (or a backup of each partition I'm guessing is more feasible). This doesn't seem to be too difficult to do, but my main problem is restoring the backup.

Is it a simple matter of basically .tar'ing the whole / filesystem? and if so, to restore can I just use a live CD to restore the partition that is needed? How does LVM affect the restoration process? I have looked at Amanda as a backup solution, though we wont be backing up directly to tape (backup to a share location then copy to the tape drive).

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved