Ubuntu Installation :: 11.04 Unity External Monitor Resolution
May 9, 2011
after upgrading from 10.10 to 11.04 i received the Unity as a default. with the help of this forum i figured out how to get the Gnome.i would like to try the Unity but when i am switching to Unity i cant get the resolution i need to my external monitor.i have an application, Switch resolution that doesn't work under the Unity but does work under Gnome.i can change the resolution in the external monitor to its native resolution but than i get the upper panel in a good resolution and below only black without any window or anything.
View 2 Replies
ADVERTISEMENT
May 24, 2011
I have an EeePC 1005HA with Intel 945G chipset and graphics. I've got a 21" no-name touchscreen attached to the laptop with the intention of hiding the laptop away behind it and simply using the tactile widescreen with virtual keyboard (onboard). By the way, the Touch screen is working great OOTB in Ub 11.04, although will have to tweak some more to get multi-touch working.On it's own the netbook runs 1024x600 (16:9) automatically. As soon as I plug in the larger monitor and mirror the images it auto-defaults both to 800x600 60hz and I have no options to select a higher res. I want to be able to run the large screen in something like 1024x600 or better, as long as its 16:9. At the moment everything is stretched out on the larger screen and on the netbook I have a 800x600 with black margins left & right.
Can't seem to work it out. The Monitor Config doesn't give me any higher options than 800x600 when mirrored. Below is the output of xrandr, if it's any help. Also my xorg.conf file is practically empty.
View 9 Replies
View Related
Aug 28, 2009
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
View 9 Replies
View Related
Jan 2, 2010
I've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.
My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course
View 5 Replies
View Related
Oct 12, 2010
I have finally decided to reach out for help because I've been messing around for 3 days with xorg.conf and I'm a beginner and not getting it right. What I want to do is to use only my external monitor (1920x1200) via DisplayPort when my computer is docked. And then my laptop display (1280x800) when undocked. I am using Ubuntu 10.04.
I have setup System->Preference->Monitor: Unchecked <same image in all monitors>, turned off laptop display, and set External monitor to 1920x1200. After doing this everything works when in Xwindows. The resolution is correct when I am docked, and when I am undocked it defaults to my laptop display.
The ONLY problem with using the System->Preferences->Monitor is that when I start up the computer when docked the external monitor goes to the incorrect (laptop screen) resolution at the initial login screen. After I login the resolution corrects itself but it's messy with reinitialization of the screen and my icons being all messed up. I think this happens because these settings only take effect after logging in.
I believe I have to edit the xorg.conf to get my setup working at the login screen. Can someone please tell me how to this.
View 1 Replies
View Related
May 5, 2010
I am running Fedora 12 on a T400 Thinkpad. When connector my external monitor prior to powering on the computer or if I restart it, I get a lot of resolution choices from xrandr. See below.
Code:
$ xrandr
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 303mm x 190mm
1440x900 60.0*+ 50.0
1024x768 60.0
[Code].....
Is there some daemon I need to restart to detect the monitor resolutions correctly, or is there a module I can reload?
There seem to several variables to reproducing the behavior. If I restart without the laptop without the monitor plugged in, log in, and then, plug the monitor in with the monitor powered on prior to plugging, all resolutions are detected properly. However, if I plug the monitor in with it powered off, then power it on, I only get the few options shown in above. Once I get the reduced number of options, it seems to stay that way till I restart regardless of how I unplug the monitor.
I have found a work-around by just forcing the modes with xrandr --newmode and xrandr --addmode, but I would much rather have the modes autodetected.
View 1 Replies
View Related
Sep 24, 2010
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
View 8 Replies
View Related
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Jan 6, 2010
why both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies
View Related
Mar 23, 2011
I have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G
Chipset: FRU PN 49P1599 (Intel 845G)
View 9 Replies
View Related
Mar 8, 2010
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Now i'm starting to get frustrated
[Code]...
View 3 Replies
View Related
Oct 11, 2010
Just installed Ubuntu 10.10 "Maverick Meerkat".
Install went through smoothly in both my laptop and an old Dell Optiplex GX 270.
Screen looks fine on laptop but terrible on the Dell. It's stuck on Refresh rate of 60Hz and flickers pretty bad. 60Hz is the only rate offered! How can I change the refresh rate to ~65-72Hz like is possible on earlier Ubuntu versions to ease eye strain?
View 7 Replies
View Related
Jun 24, 2011
I just upgraded my Ubuntu V10.4 LTS to Ubuntu 11. After that, I lost my external monitor and I cannot find those usual "preferences", "Administration" navigational menus on top of the screen.
Stumbled into Multiple Monitors under System, but it didn't detect the second monitor. However, the 2nd monitor was active and with system startup messages displayed there during reboot. But as soon as the desktop appear, that 2nd monitor lost its signal.
View 6 Replies
View Related
Oct 27, 2009
I am trying to install Fedora 11, but the monitor that I am using is only 640x480. When the window comes up to start the install, I cannot see any of the buttons or tabs for selecting the items. How can I adjust the resolution so that I can see the entire image in my screen?
View 5 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
Feb 15, 2011
I have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
View 2 Replies
View Related
Apr 13, 2009
I have just installed Fedora 10 and all went well except that the resolution is set to 1024x768, which is not cool on a 22" HP w2207h LCD monitor. When I bring up Monitor Resolution Setting the Mirror Screens is checked and 1024x768 is the highest resolution. If I uncheck Mirror Screens and select "Laptop" I am able to select 1680x1050, but it now has my desktop in the upper left hand corner of my monitor. Should I be looking for a driver for my i845G graphics processor?
PS: I am new to using Linux please be patient with my ignorance.
View 2 Replies
View Related
Oct 30, 2010
Have a Dell Studio XPS with 64 bit Meerkat on it. Whenever I connect my Samsung external monitor by displayport/dvi ubuntu no longer boots. Machine unresponsive and have to cut power and disconnect it. :/
Sounds exactly like this bug, no? [URL] Except for the fact I have ATI video card and the restricted drivers (with Catalyst control center, although it is useless).
Code:
02:00.0 VGA compatible controller: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series] Win7 install works fine.
View 2 Replies
View Related
Aug 20, 2011
I have installed Fedora 15 64bit live with no apparent errors and I get to the "Welcome" where it says just a few more steps before I can start using Fedora after filling in the details hit the "Forward" button in the lower right hand corner. The problem is I can't see the forward button, its like I need to page down or something but everything I have tried isn't working. I then decided to use the Fedora 15 64bit DVD thinking a driver was missing or something and it is still the same issue. I am using a Thinkpad T61 laptop with an external monitor and the external monitor goes blank when it boots to the welcome screen, but I can scroll over to the external and see the mouse cursor on the external. It seems that if I could see the welcome screen on the external monitor that I might be able to see the "Forward" button. Both installs went without a hitch, the DVD install found my internet connection and downloaded a bunch of stuff and the DVD install took about two hours to complete, again with no errors reported. I hope I am not being daft here and missing something obvious.
View 2 Replies
View Related
Oct 19, 2010
I just upgraded to 10.10 64-bit from 10.04 64-bit and my external monitor is no longer working properly. Using the "Monitors" function in preferences, it does recognize my monitor and does in fact activate it, but the total available screen real estate is only increased by 10-15 pixels (i.e. my mouse moves to the external monitor, but it stops after 10-15 pixels). Thinking that something went wrong with the upgrade, I backed up my data and did a clean install from CD after format and the problem is the same.
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
View 2 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Aug 11, 2011
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
May 11, 2011
I can't use function key combination to toggle between connected monitor and laptop monitor of my Dell N4010, running Ubuntu Natty.This happens in Unity interface only. In gnome (Ubuntu classic), function key combination works fine.When I press Fn+F1, it acts similar to pressing super+F1.
View 2 Replies
View Related
Apr 18, 2011
When I first started using Unity, I configured the dual monitor system under the settings program. I then changed my xorg.conf, but Unity is ignoring that configuration and switching to its own. I think this might have something to do with RandR, but I'm not sure. Is there a way to make Unity use the xorg.conf configuration?
View 1 Replies
View Related
May 5, 2011
How can i be able to enable dynamically my second monitor and use Unity at the same time?Summary system:HP Compaq 8710p laptop, Nvidia Quadra 320M, Natty 64bit, with attached 2nd 19" monitorDescription steps taken this far:By default ubuntu ships with the following xorg.conf conform the new minimalist trend:
Code:
Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
EndSection
I use the nvidia-current binary drivers. In this configuration:Unity works Xrandr sees 1 screen (so no configuration of second screen possible)Standard monitor configuration tool in Ubuntu shows 1 screen With [URL]
Code:
disper -d auto -e
my second monitor comes alive. My laptopscreen becomes dark (with moving mouse cursor). Unity / Ubuntu classic (no effects) go into scrambled mode. Mouse is moving, objects are
[code]...
View 9 Replies
View Related
Jun 30, 2011
The title says most of it. I've got an Optiplex 755 (Dual 20" Dell Monitors) on my desk at work but have access to a 780 if I want it. The 755 does NOT work with Unity, simply won't handle it. I'm not interested in doing an OS Reinstall and data transfer of all my work stuff if Unity doesn't work (KDE is fine on my 755...well sort of, I have Konsole windows popping up through my Firefox and KRDC windows but that's a somewhat minor issue). Anyone have an Optiplex 780 that they have the most recent Ubuntu installed with Unity running (Dual Screen) without a problem?
View 2 Replies
View Related
Jun 21, 2011
I have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".
I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.
How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.
View 7 Replies
View Related
Jun 23, 2010
How to change the resolution of my tv to be the same as the monitors. I mean cloning ..
View 9 Replies
View Related
