Ubuntu Installation :: 10.4 Upgrade Causes Eclipse To Fail?

Apr 30, 2010

After upgrading to 10.4, Eclipse started showing the the following error:

Failed to load JavaHL Library.
These are the errors that were encountered:
no libsvnjavahl-1 in java.library.path
no svnjavahl-1 in java.library.path
no svnjavahl in java.library.path
java.library.path = /usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/i386/client:/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/i386:/usr/lib/xulrunner-1.9.2.3:/usr/lib/xulrunner-1.9.2.3:/usr/java/packages/lib/i386:/lib:/usr/lib

Synaptic shows libsvn-java as installed.

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Upgrade 10.04 To 10.10 Fail?

Oct 23, 2010

I tried to do a upgrade-manager -p ( or maybe -d , I forget ) and at the end it said the upgraded failed and my os was in a broke state. What can I check or do to complete the upgrade?

View 1 Replies View Related

Ubuntu Installation :: Upgrade From 10.10 To 11.04 Fail

Apr 28, 2011

Fail the upgrading...
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.

This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.

View 9 Replies View Related

Ubuntu Installation :: Certain Programs Fail To Run After Upgrade?

May 3, 2010

I have a laptop running Ubuntu 10.04 and also two dual boot desktop machines, both running Windows XP and Ubuntu. I have upgraded one of the desktops to Ubuntu 10.04 and since doing so Thunderbird will not run on the laptop or the desktop. On clicking the launcher there are signs of activity for a few seconds and then they stop and Thunderbird fails to open. Also there is no longer any sound on the desktop that I have upgraded. I am reluctant now to upgrade the remaining desktop in case I have the same problems

how to get Thunderbird running again, please. I have already spent a week unsuccessfully trying to get the sound working and have abandoned it, but I would like Thunderbird to start running again.

View 1 Replies View Related

Ubuntu Installation :: Online Upgrade From 10.10 To 11.04 - Fail

May 1, 2011

I was a little worried about doing an upgrade, via Update Manager, from 10.10 to 11.04.

I was right to be worried.

Boot hangs and booting in verbose mode, grub does come up, but going into the main latest kernel version shows;

VFS: Cannot open root device "sda1" or unknown block.

Please append a correct "root=" boot option; here are the available partitions

0b00 1648575 sr0 driver sr

May have missed some of the text as wrote it down.

sda1 was my original and only partition.

Have used my 10.10 live cd and file structure and files are all there,

Took the opportunity to shrink the single main partion and create primary partitions for /home and another for all the junk I accumulate. sda1 will still be my boot partition.

In the process of making a 11.04 boot CD.

View 4 Replies View Related

Fedora Installation :: Upgrade F12 To F14 FAIL ?

Nov 16, 2010

I'm using Fedora 12 and today i was trying to upgrade it on F14 ...I download DVD from fedora site burn it on disc and start Upgrade...On start i get error that findutils is corrupted and i need to abort instalation... I think ok maybe disc is not good burned.. i Burn one more disc i test it its ok ... buti get same problem...Ok i try "Preupgrade" software.... he download all i reboot system, upgrade is start ...and... same problem finutils is coruppted... So now i cant upgrade F12 to F14 version...Icons are changed, for system version is F14... some data is changed to F14 some is still F12 + i lost Audio card so i don have sound :S

What can make me problem or how to solve?
In upgrade.log in /root/ i have one line Upgrading findutils-4.5.9-2.fc14.x86_64

View 9 Replies View Related

Ubuntu Installation :: Power Fail During Upgrade / Resolve This?

May 3, 2010

The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.

The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.

Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.

View 5 Replies View Related

Ubuntu Installation :: Upgrade / Removal Of Software To Fail In 10.04

May 27, 2010

I need to determine which package is causing every upgrade installation or removal of software to fail in Ubuntu 10.04 I have had a problem since allowing some non-supported upgrades (not certain what they were for) in 9.10 (FAIL!) I hoped that upgrade to 10.04 would resolve the issue (I know FAIL again!). I am guessing I can;

a) Remove the offending package
b) Repair the missing/damaged 10.04 files
c) replace the 10.04 OS

I am running a dual boot one drive system with XP and Ubuntu each in their own partition and a 3rd partition where data resides

View 9 Replies View Related

Ubuntu Installation :: Fail To Upgrade Qbittorrent And Now Cannot Reinstall It?

Apr 28, 2011

I wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?

And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.

So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.

I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.

View 1 Replies View Related

Ubuntu Installation :: GRUB2 / RAID 10.10 To 11.04 Upgrade Fail

Apr 30, 2011

GRUB2 / RAID 10.10 to 11.04 Upgrade Fail.....

View 9 Replies View Related

Ubuntu Installation :: Live CD, Upgrade And Install Fail On 9.10 And 10.04 - 9.04 Works?

May 23, 2010

My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.

View 3 Replies View Related

Ubuntu Installation :: Logitech Dinovo Edge - Usb Keyboard - Fail On 10.04 Upgrade

Aug 7, 2010

I had a hell of a time getting 10.04 to work, because I only have a Logitech Dinovo Edge keyboard, and it stopped working after I upgraded. After grub, I'd get to the login screen, and the keyboard wouldn't do anything.

First, I dug up a mouse that did work. Then I logged in by clicking the Human Accessibility icon on the login screen. Somewhere in there, I was able to bring up an on screen keyboard. With the on screen keyboard, I could now login. Under system>preferences>bluetooth, I was able to, after some fiddling and plugging and unplugging, get the keyboard paired to the bluetooth dongle. Anyway, it seems pretty obvious now that my original bluetooth pairing was lost with the 10.04 upgrade, and I just needed to re-pair. I don't remember having such problems on previous upgrades, though.

View 1 Replies View Related

Ubuntu Installation :: Upgrade Evolution - Danilo's Repository Has A Dependency Fail

May 21, 2011

I installed a PPA repository ppa:danilo/evolution, and try to upgrade evolution from there. However, there was a dependency fail, and it did nothing. Thus, I remove the repository. Nonetheless, today I find out that my installed version of evolution is gone! and when I try to install it again, it says that danilo's repository has a dependency fail... and it does nothing.

[Code]....

View 3 Replies View Related

Fedora Installation :: Software Update And Yum Fail On Fresh Upgrade

Jun 15, 2011

I just upgraded to Fedora 15 this afternoon from the install DVD.

When I try to do an update with the software update app I get an transaction error:

could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686

Here is what rpm reports as being available:

When I tried yumex I get a different error:

View 2 Replies View Related

Ubuntu Installation :: Dual Boot Win7 System - Epic 10.04 Upgrade Fail

Jun 2, 2010

I had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:

* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.

I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.

View 3 Replies View Related

Fedora Installation :: Fail Upgrade Attempt - Unable To Find Root

May 26, 2010

I am attempting to upgrade Fedora 12 to 13. I get an error screen that said root could not be found. Four options are given. Not sure exactly their wording, but two appear to allow you to cancel the other two warn that if you reinitialize you will wipe out all data.

I have a Vista partition and a Fedora partition. I've added the vista ntfs partition to fstab with no help. All of the partition use the long UUID form. I added the root location (root (hd0,5) to the upgrade menu item in grub.conf and that didn't work either.

I'm reluctant to proceed for fear of initializing the entire drive. I could live with installing Fedora 13 over the existing partitions.

View 3 Replies View Related

Ubuntu Installation :: Upgrade From 10.10 To 11.04 Error "written Fail At Stopping Automatic Crash Report Generation"

Apr 28, 2011

Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot

but it doesn't do it properly.

View 8 Replies View Related

Software :: SVN Does Not Work In Eclipse After Ubuntu Upgrade

Dec 27, 2010

I recently upgraded my Linux Ubuntu from 10.04 to 11.04, but after the upgrade my Eclipse lost it's plugins. So I re-installed subclipse [URL] but it does not work; There is a "<SVN Repository Exploring>-perspective>" but it does not contain the right Views, and I can't add them manually, beacause there is no 'SVN'-category. I tried to reinstall Eclipse, but when I remove and re-add it using Ubuntu Software Center all features and plug-ins are exactly the way they were... So I still can't use SVN.

View 2 Replies View Related

Ubuntu :: Eclipse Plugins Don't Work / Doesn't Install A Bunch Of Libraries And Eclipse Cannot Recognize Standard Java Files?

Jan 19, 2010

I have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.

Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.

View 4 Replies View Related

Ubuntu :: OS Upgrade Causing NetBeans To Fail

May 7, 2010

I recently upgraded to 10.04 and now netbeans is not working. It worked fine the first restart after i upgraded so i thought all was good. This morning i ran it and it said something about not being able to load some modules. Since then, i've tried uninstalling it, re-installing it, and numerous restarts, all to no avail. I'm gonna try downloading the package from their website and running it from a separate install and see if that helps, but after that, I'm out of ideas.

When i run it either from the terminal or by clicking on it, it shows the loading screen, then the loading screen dissapears, then nothing else happens. In the terminal, it waits about ten seconds after the screen dissapears and the program seems to exit, since the terminal begins accepting commands once again.

View 4 Replies View Related

Ubuntu :: Lucid Upgrade - Livecd Fail

May 14, 2010

I upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.

My computer is Asus 1201N: [url]

View 4 Replies View Related

Ubuntu :: Upgrade From 10.10 To 11.04 Fail - Error Window Appear ?

Jun 11, 2011

I have problem when I try to upgrade my Ubuntu 10.10 to 11.04 using Internet the upgrade start then this Error window appear.

The error is :

View 4 Replies View Related

CentOS 5 :: RPM Upgrade Should Fail / Why Is So?

May 17, 2009

I'm running some tests with RPM's.
In what case an RPM upgrade will fail (failed dependencies error message)?

For example, I have mysql 5.1.33 installed.
If I run code...

View 3 Replies View Related

Ubuntu :: Upgrade 10.10 Fail - Black Screen Gnome

Nov 2, 2010

Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.

on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.

Kde is still working fine.

Or at least how can I completely reinstall gnome.

View 1 Replies View Related

Ubuntu Servers :: Grub Fail After Dist-upgrade

Nov 10, 2010

After upgrading my ubuntu server from 8.04 to 10.04 and then to 10.10, grub failed to load and showed a: L 99 99 99 99 99 99 99 99 ....

I restarted using a liveCD, mounted my boot partition as /boot and then "grub-install /dev/sdb" (sda is the usb drive now) so I have access to grub console, but I don't know how to recover my boot menu.

I also use LVM, but I don't know if this is relevant.

View 1 Replies View Related

Fedora :: Yum - Releasever -13 Upgrade Fail

Jun 10, 2010

I was told that this command would upgrade from 12 to 13, while avoiding the boot space problem.

Everything seemed to go well, - all 1691 rpms downloaded to: /var/cache/yum/x86_64/13/fedora/packages/zip-3.0-1.fc13.x86_64.rpm, and then halted with the following message:

I'm not exactly a noobe, but this leaves me clueless. Can I salvage the upgrade?

View 5 Replies View Related

Ubuntu :: Eclipse Not Opening Files In Eclipse?

Sep 11, 2010

I recently had to reinstall Eclipse on ubuntu 10.10 and i did it twice, once just removing eclipse package, and the second time removing every package associated with an eclipse install.when i launch eclipse I go into my package view and select a package and then double click on a Java file.

View 5 Replies View Related

Fedora Installation :: F15 Upgrade - Cold Boot Error "Your System Last Boot Fail Or Post Interrupted Please Enter Setup To Load Default And Reboot"

Jun 30, 2011

I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.

View 12 Replies View Related

Programming :: Eclipse PDT 2.0 Versus Zend Studio For Eclipse

Jan 28, 2009

I have been writing PHP using Adobe Dreamweaver; I have been looking around for an application that focus more in PHP.I have found:

[URL]

and:

[URL]

I know Zend stands behind PHP and that Eclipse is a popular open source IDE. What is the difference tho?Is the PDT Project only a functionality that could be added to Eclipse IDE? Is Zend for Eclipse a stand alone IDE for PHP? if so, Why the Eclipse in the name? I have downloaded Zend Studio for Eclipse, so far it seems very complete (no that have learned how to use all its features).

View 1 Replies View Related

Programming :: Metrics Plug-in For Eclipse - Does It Support Eclipse CDT

Sep 17, 2010

The Metrics plug-in supports Java development well at Eclipse.

[URL]

I would like to know if it supports Eclipse CDT, so I can use it with my C++ project. Any thought? If it doesn't support CDT, is there any good static code analysis tools available for Eclipse CDT?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved