Ubuntu Installation :: 10.04 And 10.10 Recurringly Crash (target System Does Not Have Requested /sbin/init )?

Jan 16, 2011

After trying most of the solutions I could think of, including reinstalling and upgrading, I'm posting here hoping someone would take me out of this misery now.Laptop:thinkpad t500I was running Ubuntu 10.04 and it froze. I rebooted and it shows the following message and gives me the "initramfs" prompt:Quote:

BUG: unable to handle kernel paging request at 00f44000
...
...

[code]....

View 1 Replies


ADVERTISEMENT

Ubuntu :: 10.10 - Target Filesystem Doesn't Have Requested /sbin/init

Sep 1, 2011

Ubuntu has officially jumped the shark. I did an update...restarted and got this:

Quote:

mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init=bootarg

[Code]....

View 9 Replies View Related

Ubuntu Installation :: Target Filesystem Doesn't Have /sbin/init?

Jun 22, 2011

I can't get Ubuntu to boot. The computer isn't actually mine so I don't know exactly what happened, but I think an update went badly wrong...

Anyway, whenever I try and boot Ubuntu, i get this

Code:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init
No init found. Try passing init= bootarg

(and then something about initramfs) I've been trying to find out what the error is on the forums, and I think it could be to do with grub not being able to find something, but I really don't know because I don't understand exactly what's going on.

I can load the grub menu, but I can't boot Ubuntu from there. Also, I can't run or install Ubuntu on a live usb because it just hangs at the Ubuntu loading screen.

View 6 Replies View Related

Ubuntu :: Unable To Boot - Get "target System Doesn't Have /sbin/init"

Jan 5, 2011

When I try to boot in to Ubuntu (10.10) 64x I get the error "target system doesn't have /sbin/init" Then busy box comes up.

View 2 Replies View Related

Ubuntu :: Target Filesystem Doesn't Have /sbin/init.tes?

Mar 4, 2010

Having trouble booting into Kubuntu originally installed with Wubi.The system returns this error:

Code:
mount: mounting /dev/loop0 on /root failed: Device or resource busy
mount: mounting /sys on /root/sys failed: No such file or directory

[code]....

View 1 Replies View Related

Ubuntu :: Target Filesystem Doesn't Have /sbin/init

Oct 11, 2010

I've recently installed 10.10 onto my laptop, a Toshiba Equium A-100. It's been working perfectly for the last few weeks, but today I woke up, booted and got this;

Code:

mount: mounting dev/disk/by-uuid/9f8e1fd1-ca75-4eeb-8afc-a6b7bd756180 on /root
failed: Invalid argument
mount: mounting /dev on /root/dev failed: No such file or directory

[code]....

I'm a bit of a linux newbie, and while I can use the system fine, once we get into a shell I'm out of my depth. My laptop is useless now, and, unluckily, my 2000 word end-of-semester submission is on it. No, I didn't back it up because I wrote it last night. Arrgh.

View 6 Replies View Related

Ubuntu :: Target Filesystem Doesn't Have /sbin/init. And More?

Nov 15, 2010

I hope that you will be able to help me. I know that my topic may seem the same as some other threads, but there is a twist and it seems that I can't sort things out. I installed Ubuntu on the family's 4 year old Dell about a year ago when Windows stopped working (too many bluescreens!). It seed to be good, until one day when I tried to boot and it listed some codes on a black screen. I then reinstalled ubuntu from one of my disks, and it worked fine... until the entire thing occurred again a week later. This happened once or twice more, until today's problem:

It won't boot into ubuntu and also has white writing on the black background (read this below). I tried to reinstall from a ubuntu install disk, burned additional install disks, made an install usb, and also tried opensuse. They all say the below message when I try to boot into the disk:

Killed
mount: mounting on /dev on root/dev failed: No such file or directory
mount: mounting on /sys on root/sys failed: No such file or directory
mount: mounting on /proc on root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.

[Code]...

View 3 Replies View Related

Ubuntu :: Target Filesystem Cant Find Sbin/init?

Sep 15, 2010

when I start my laptop (Ubuntu 10), it even doesnt offer log in and writes this:mount: mounting/ proc on / root/ proc failed: No such file on directory Target filesystem doesntt have sbin/init. No init found. Try passing init=bootarg.device scan complete, Attached scsi generic sg2 type 0I tried to restart it several times, but it shows the same. The evening before I used it to show some files on projector and after I disconnected my laptop from it, it was a bit slower, but working. And the next morning I get that message. As I just started with Linux,

View 3 Replies View Related

Ubuntu Servers :: Target Filesystem Doesn't Have /sbin/init?

Mar 22, 2010

My UBUNTU 8.04 server does not boot anymore : here is the error message :Quote:Target filesystem doesn't have /sbin/initPrevious messages on the boot were :Quote:

kinit: name_to_dev_t(/dev/disk/by-uuid/0a301...a8 = md1(9.1)
kinit: trying to resume from /dev/disk/by-uuid/0a301...a8
kinit : No resume image, doing normal boot...

[code]....

View 6 Replies View Related

Ubuntu :: 10.04 Cant Boot - Target Filesystem Doesnt Have /sbin/init

Nov 7, 2010

since yesterday that my ubuntu does not boot. This message appears...Target filesystem doesnt have /sbin/init,No init found. Try passing init=bootarg. (initramfs)

I boot ubuntu-live from a usb flash drive, but i can't mount the partition where i have installed ubuntu /dev/sda6. Either run fsck command. this error appears.... Filesystem mounted or opened exclusively by another program?

View 9 Replies View Related

Ubuntu :: Target Filesystem Doesn't Have /sbin/init (Can't Boot)?

Apr 6, 2011

Click here for solution... http://ubuntuforums.org/showpost.php...99&postcount=3So I just realized how stupid I was being trying to run these commands for a NTFS partition... so I searched and used Gparted to check sda2, and also ran

Code:
root@ubuntu:/home/ubuntu# sudo ntfsfix /dev/sda2
Mounting volume... OK

[code]....

View 2 Replies View Related

General :: Target Filesystem Doesnt Have /sbin/init?

Oct 1, 2010

I have installed Ubuntu 10.04 .. normally and I installed also some programs; I had problems with the monitor and many times I shutted dow the CPU when I changed the monitor and turned on angain and appears a black screen:after

mount: mounting /dev on root/dev failed: no such such file or dir
mount: mounting /sys on root/sys failed: no such such file or dir
mount: mounting /proc on root/proc failed: no such such file or dir

[code]...

View 3 Replies View Related

Ubuntu :: Targe File System Doesn't Have /sbin/init?

May 26, 2010

I have a Lenovo X60 with Intel Centrino Duo Core @ 1.83GHz 1.83GHz, and 0.99 GB of RAM. I am running a dual boot with Windows XP SP3 and the latest version of Ubuntu desktop. My problem is that after I ran the Defrag my C: drive in Windows, I can into my ubuntu.I was greeted with the following error message when i tried to boot into ubuntu {Target file system doesn't have /sbin/init}

View 2 Replies View Related

Ubuntu Installation :: Can't Find /sbin/init, Drops To Busybox

Sep 9, 2010

I'm running Ubuntu 10.04 i386 on a K9M6PGM-2 mainboard with an AMD Phenom Triple core @ 2.3 gig. I have 2 gig of RAM and Lucid is on a 320 gig HDD, /dev/sda1 shared w/Win XP. I have in the SDC position an 80 gig with Ubuntu Karmic. Long before the Widows was installed this problem annoyed me. My hope was that by wiping GRUB out and rebuilding it from the Live CD that this problem would be fixed but after several boot process' the problem ihas returned.

When I boot into Karmic and look at /sbin I find the file init but of course cannot open it. Is there any way to fix this?

The nachine might boot into Lucid 3 or 4 days in a row with no problem and then refuse to boot anything but WinXP or Karmic. It seems not to be the GRUB as Wendoze and Karmic boot as expected.

At the /dev/sdb I find;

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 9327 74919096 83 Linux
/dev/sdb2 9328 9729 3229034+ 5 Extended
/dev/sdb5 9328 9729 3229033+ 82 Linux swap / Solaris
and do not know the origin of the partition.

View 1 Replies View Related

Ubuntu :: Computer Will Not Load /sbin/init Error

Nov 27, 2010

After normal use the computer was turned on and would not load (10.04) and the error message on the screen was :

Quote:

/sbin/init: error while loading shared libraries: libnih.so.1: cannot open shared object file: Input/output error

[ 26.369130] Kernel panic - not syncing: Attempted to kill init!

Anyways, I put the hard drive in an external unit, and I ran fsck. Many errors came up and they were all fixed. I was able to mount the drive on my other computer and back up files in the home directory.

If I try to select recovery mode and the same error appears.

What can I do in this case? Can I somehow get into a recovery-like mode off of the livecd to maybe fix the packages that might be "messed up"?

View 1 Replies View Related

General :: Ubuntu Booting :Can't Find /sbin/init?

Apr 17, 2011

I have an Acer netbook with the netbook version of Ubuntu and Windows 7. When I try to boot on Ubuntu I get a terminal that says "Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg." I've found questions about this, but I get lost at "after booting from livecd." I put ubuntu-10.10-netbook-i386 on a flash card, but I don't know how to boot from it; I think that's my main problem.

View 4 Replies View Related

Slackware :: ERROR: No /sbin/init Found On Rootdev ( Or Not Mounted )

Apr 21, 2010

I'm running Slacware current. Ran the updates this morning, including kernel 2.6.33.2. I always get nervous about that since something often goes wrong. Sure enough -

trying to boot I get No kewrnel modules found for Linux 2.6.33.2-smp mount: mounting /dev/sda9 on /mnt failed: No such device ERROR: No /sbin/init found on rootdev ( or not mounted ) and failure to proceed with booting. I got an original warning about the initial ram disk being too big to fit and switched to using generic kernel, and yes I did run lilo afterwards and did add the initrd.gz line. I run Ubuntu on the same laptop and have to boot into that and work as chroot in my Slackware partition to try and fix things.

View 14 Replies View Related

Slackware :: Software RAID 1 Versus LILO / Kernel-generic - ERROR: No /sbin/init Found On Rootdev

Jul 1, 2011

I'm currently trying to setup Slackware 13.7 on a server, using software RAID 1. I'm using the README_RAID.TXT document at the root of the Slackware disc as a reference. Anyway, here's what I have so far.

/dev/md1 -> /boot partition
/dev/md2 -> swap partition
/dev/md3 -> / partition

Code:

[root@raymonde:~] # fdisk -l /dev/sd{a,b}
Disk /dev/sda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders, total 80293248 sectors
Units = sectors of 1 * 512 = 512 bytes

[code]....

I created an initrd image using mkinitrd -F, added an according stanza to /etc/lilo.conf and ran 'lilo' after that. Now I can boot on the vanilla huge kernel all right. But I can't seem to boot on the generic kernel. Whenever I try to do this, the boot process stops short on the following error message:

Code:

mount: mounting /dev/md3 on /mnt failed: Device or resource busy
ERROR: no /sbin/init found on rootdev

View 5 Replies View Related

Ubuntu Installation :: 10.04 SSD Error: Read-only File System: '/target/bin'

Nov 28, 2010

I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:

[Errno 30] Read-only file system: '/target/bin'.

Curiously:

* Windows XP will install to this SSD with no issues

* I can install 10.04 to a standard HDD with no errors.

What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)

I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.

View 1 Replies View Related

Debian :: INIT: Cannot Execute "/sbin/mingetty"

Oct 18, 2010

So I was looking around for something to auto log me in. I only have the basic Debian system...no X...just command line.

Anyway, I try mingetty and it looks like I've broken it. I'm using this as an NFS server to store my music which I have up and running. It seems that it works even when I'm not logged in (I didn't know that at the time). Now when I start my computer it shows INIT: cannot execute "/sbin/mingetty" and it shows that 10 times, then I get: INIT: Id "1" respawning too fast: disabled for 5 minutes

It seems that it's just going to keep doing that and wont stop

I followed this article: [URL]

View 2 Replies View Related

General :: "/sbin/init Does Not Exist" On Boot?

Nov 24, 2010

I am having some issues about every other time y to boot into Arch linux.it is installed on my third hard drive, and my grub from Fedora is what it boots from.about every other time i try to boot into it i get this error:

Code:
Waiting 10 seconds for device /dev/sdb3...
ext4-fs (sdb3): mounted filesystem with ordered data mode Opts: (null)

[code]...

View 15 Replies View Related

Debian Installation :: Install For A Target System / Create The Image On A USB Drive For The 586 Soekris Server On 686 HP Laptop?

Feb 16, 2010

I wish to use my laptop to create a system for my Soekris 4801. I don't want to take the server down for the lengthy install ( took 6 hours last time, Fedora 5 ). I want to create the image on a USB drive for the 586 Soekris server on my 686 HP laptop. Then scp the image to the Soekris and reboot and configure the server.

View 3 Replies View Related

General :: Gentoo - INIT Process Necessary For An Ultralight System Installation?

Jul 30, 2011

I am working on a light version of linux for no particular reason other than to see how small I could make it. I was wondering if INIT was necessary, or if I could perform all of the INIT-related tasks (fsck, unmounting, etc) by hand/bash scripts?

I do not need multi-user functionality (Or much of anything for that matter). I started off with a Gentoo base 2.0.2 Install with kernel 2.6.38.

View 2 Replies View Related

Ubuntu Installation :: System Won't Mount After Crash?

May 2, 2011

After my computer crashed due to an electrical failure in the house, every time I try to boot up (I'm using Ubuntu 10.04) I get the following error:

mount: mounting /proc on /root/proc/ failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg.

I'm then put into initramfs

I assume that this is because the system wasn't unmounted properly but I haven't been able to find the best way to solve this problem.

View 2 Replies View Related

Ubuntu Installation :: Broken System After Crash During 9.10 To 10.04 / Get This Fixed?

May 1, 2010

As the title says, i was in the middle of the upgrade, when the system froze then a black screen with the text similar to: starting apache ..... starting ..... ... in that way, but with more text, i could not remember the exact details. When i boot up, it say /dev not found, and other errors, and a weird black screen that seems to be loading modules appears, but never finishes and starts to act strange. Any way i can get this fixed without just copying my data and reimaging my partition.

View 2 Replies View Related

Ubuntu Installation :: System Crash After Partial Upgrade 10.10?

Apr 7, 2011

I have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:

1) the update manager crashed while updating.

2) I rebooted and ran it again. same crash at the same stage.

3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.

Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"

EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.

View 3 Replies View Related

Ubuntu Installation :: Crash During 10.04 Install Left System Unbootable

Jun 6, 2010

My son kicked out power during the install phase of 10.04 (about half complete) and now the system is unbootable.

The boot process dies shortly after starting fsck with the error:

init: plymouth main process (382) killed by SEGV signal

So this looks bad (to me), segmentation violations are never good.

So does anyone have any suggestions for booting and completing the upgrade?

If I'm SOL on this OS image is there a way to image over the OS and save my data?

The only option I see now is to buy a new disk, image onto it, mount my current disk and copy my data. (takes money and time)

View 5 Replies View Related

Ubuntu Installation :: System-crash While Installing Textlive-fonts-extra

Jan 2, 2010

I was multitab browsing (around 15 tabs) in latest firefox for karmic koala (9.10) and at the same time downloading (probably already auto-installing) in synaptic-package-manager the package: textlive-fonts-extra (and other necessary packages; this was around 90 mb download and 250 mb installation)suddenly the pointer doesn't move anymore, (Alt+tab , and other combinations also didn't work anymore)
and I hold the power button untill the computer is turned off,when I reboot I get this message"invalid system disk, replace it and press any key to continue"now I'm using a livedisc to boot the computer (jaunty 9.04)To rebuild the system i think to manually install the packages that probably were interupted while installing and made it not work anymoreThe packages to be installed when text-live-fonts is marked for install (in synaptic opened from the livedisc) are:

dvipdfmx
lmodern
text-common
texlive-base
texlive-base-bin

[code]...

This may be different with 9.10 configuration (can anybody look to see which are necessary with 9.10) I think the computer wasn't responding anymore because I used too many tabs at ones. I had this same problem a few times before in the past weeks but then I wasn't installing something and the computer did restart and firefox restored all the tabs. I cannot enter /home/ from the livedisc (no permission) and it's necessary , I am in the middle of exams and i need to print the paper that is on the disc by monday Is there a way to enter it via command console?

View 2 Replies View Related

Ubuntu Installation :: 10.10 Nvidia Driver Install Causes System Reboot Crash

Nov 3, 2010

This was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.

I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.

View 2 Replies View Related

Fedora Installation :: LiveCD-system Crash At Partition Step?

Jun 5, 2011

I run ubuntu, 2 partion, one primary for / , one for /home and ofc swap.When I run the Livecd, at the partition step I do:

-Custom

-Select my / partition to install

-When I select next I get the error "blah blah, must be probably a bug...." and system crashes.

After system crach I can't boot into Ubuntu or anything, it gets me on the "error 11 ( think is 11 ) grub> " screen.Also, I think its something with my nouveau drivers, I think i get an error when boots the LiveCD something like "fudc...". It happens really fast and I can't read it properly.I did this procedure twice to write the errors, but it happens too fast to check them out. Also, is there a way to prepare the system before installing the Fedora, to avoid these errors?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved