I am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.
I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"
I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?
I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:
# mkdir hybrid_wl # cd hybrid_wl # tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz
The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.
i have found a flavor or linux i now prefer and i installed it on my laptop. i went to configure the wireless card and it tells me no wireless networks found. i can run off of the ethernet port just fine. the wireless card that's in this laptop is a cisco mpci-350 series. i would like to be able to use the laptop without having to be tethered to an ethernet cable. what can i do. how do i correct it and how would i go about installing the driver if i have to in zencafe since there isnt anywhere to install a driver.
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
i recently purchased a new custom-built computer and thought i would give ubuntu a shot (read: i'm a linux noob). i'm running 11.04. anyway, i can't get my pci wireless card to work. i downloaded the rt3562 driver from ralink's site, followed the directions in this tutorial url?t=1608095 and i keep getting an error message when i try to do "sudo make":
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
I had Karmic a while back, but i got rid of it becasue of my Bcm4312 Wireless Card would not recognize the STA driver, or bcm43xx.In that time i learned a bit of command line stuff. anyways now that I have my internet working, I was just wondering What I could do with ubuntu. I am interested in the command line and Programming. Where could I learn more about the 2 subjects?
i followed a tutorial and i used NDISWRAPPER to install the windows drivers and my device WUSB300N (wireless network card) worked perfectly. Once i rebooted however, the drivers are still installed but not activated if you get me? so the wireless card is just not read by the operating system.
i would really like to know how to patch a wireless card driver so that i can start injection in aircrack for example let's say we have an "Atheros AR5007EG" do you know where to find the driver patch for ubuntu and how to patch it ?
I've been trying to make/compile the driver for a wireless card. The card is usb, it's titled Micronext MN-WD550M and seems to use the rtl8712 driver.Firstly, though I did this once two years ago I seem to have completely forgotten how to install a driver in ubuntu.
Secondly, I'm not sure I have the right driver anyway since in the notes in the readme it says it is for i386 (I run amd 64). The driver is here [URL] Thirdly, after clicking through various readmes and documentation without feeling any more intelligent, I then tried using ndiswrapper to install a windows driver and ubuntu would crash if the usb wireless card was plugged in. Blarg.I feel like this should be so simple I'm going to make a clean installation of ubuntu 10.10 shortly (for various unrelated reasons) so anything I messed up with ndiswrapper should be back to normal.
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v18.104.22.168 driver from Ralink. I am running Fedora 22.214.171.124-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output. [chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v126.96.36.199.tar.bz2 tar: Record size = 8 blocks 2008_1225_RT3070_Linux_STA_v188.8.131.52/common/ 2008_1225_RT3070_Linux_STA_v184.108.40.206/common/2870_rtmp_init.c 2008_1225_RT3070_Linux_STA_v220.127.116.11/common/action.c 2008_1225_RT3070_Linux_STA_v18.104.22.168/common/ba_action.c 2008_1225_RT3070_Linux_STA_v22.214.171.124/common/cmm_data.c 2008_1225_RT3070_Linux_STA_v126.96.36.199/common/cmm_data_2870.c 2008_1225_RT3070_Linux_STA_v188.8.131.52/common/cmm_info.c ..... cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v184.108.40.206/RT3070STA.dat': No such file or directory make: *** [install] Error 1 make: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v220.127.116.11/os/linux' make: *** [install] Error 2 [root@fedora 2008_1225_RT3070_Linux_STA_v18.104.22.168]#
I am using ubuntu 9.10. Kernel version is 2.6.31-14-generic. I couldnt find driver for Atheros wireless card which shows in 'lspci' 0c:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
I am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
I just bought a netbook, HP DV2-1039WM, which comes with Vista. I wiped the hard drive and installed Ubuntu 9.10. A problem has arisen in that it doesn't see any wireless card. There is a button on the side with an indicator light that is used to enable/disable wireless. The light is amber and, according to the manual, it is supposed to be blue when wireless is working. The manual just says "push the button" to turn it on, which doesn't do anything.
I recently installed a dual boot on my desktop with Windows 7/Ubuntu, which doesn't have any problems. Are there driver/hardware issues with the setup I am trying on this netbook? The HP website only has drivers for windows OSes listed. Theoretically, I could reinstall windows and/or do a dual-boot, but I'd rather just keep only Ubuntu on it if possible.
I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:
Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:
Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.
I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).
I can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device. But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
I have just installed openSuse 11.4 and have been trying to get my Edimax EW-7711In wireless card to work. I have downloaded and installed NDISWRAPPER but when I type ndiswrapper -i /path/to/rt2860.inf I get a message saying that this is the incorrect driver. However this driver drives the card for both Fedora 14 and Ubuntu 10.10, both using ndiswrapper, so what may be the problem with openSuse 11.4?
I have installed Lubuntu on my dell Latitude C400. Recently I had Unbuntu, but my system was to slow for it. The wireless worked when I installed sl-modem-daemon_2.9.11~20100303-2_i386.deb, however this does not work with Lubuntu. I have used the ndiswrapper to install a driver from windows, and still it is not installed. After iwconfig i get lo no wireless extensions eth1 no wireless extensions
The other problem is this laptop has no cd dive and the ethernet connection does not work, so I can t do updates.