Ubuntu :: Hide NTFS Partitions So That Can't Be Mounted?
Sep 27, 2010
How can I hide NTFS partitions so that can't be mounted?I noticed when I'm working on Ubuntu that I can delete files on my Windows NTFS partition, I think that's a risk
View 5 Replies
ADVERTISEMENT
Jan 24, 2010
How do I...
* Prevent the sdb1 + sdb2 ext4 partitions from being shown in Nautilus/Thunar Places sidebar.
* Prevent the Western Digital SmartWare VirtualCD, sdr1, from being shown in Nautilus/Thunar Places sidebar. It is just a VCD that is part of the firmware of the external (sdb) hard drive. *GAG!*
I don't care if they are mounted or not, though I prefer if they aren't. As long as they don't show up on the Places sidebar AT ALL, I'll be happy. I never use them, but keep mounting them by accident.
Here's my fstab, can you tell me why it's not doing the above?
Code:
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code]....
View 9 Replies
View Related
Jul 25, 2011
the permission remains the same after changing it without any errors
# cat /etc/fstab
Quote:
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext4 defaults 1 1
/dev/sda1 /win/C ntfs-3g fmask=111,dmask=000 1 0
[code]....
View 1 Replies
View Related
May 26, 2011
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies
View Related
Aug 30, 2010
I would like to hide two entries in my GRUB2...(to clean up a BURG theme)
Dell Utility Partition -on- /dev/sda1
Microsoft XP Embedded (Which I believe is Dell Media Direct) -on- /dev/sda5
I understand that you must edit it in either 'menu.lst' or '30-os-prober' files.
The entry is a little like this... (?)
Code:
if [ -z "${LONGNAME}" ] ; then
LONGNAME="${LABEL}"
fi
if [ "${DEVICE}" = "/dev/sdXY" ]; then
[Code]....
View 5 Replies
View Related
Apr 20, 2010
I have a number of partitions in my Places menu that refer to either System Reserved or NTFS partitions which I have no interest in accessing and would just like to unmount/hide.
View 1 Replies
View Related
Feb 21, 2010
I wish that some partitions were hidden and others were read only, moreover I wish that these settings can't be edited by other users (except of course root user). For do this, have I only in "fstab" file in "etc" folder to comment (or delete) lines relatives to partitions that I wish are hides and I set options to "ro" to lines relatives to partitions that I wish are read only?
View 14 Replies
View Related
Mar 25, 2010
I have quite a lot of testing operating systems installed. Some with their own home or boot partition. Now my places section in nautilus is an utter MESS. I was not able to find any working solution how to hide these partitions.
View 9 Replies
View Related
Jun 3, 2010
My OS are installed as follows:
Windows 7 on /dev/sda1 (primary) type=7 (HPFS/NTFS)
WinXP on /dev/sda2 (primary) type=c (W95 FAT32 (LBA))
Linux on /dev/sda6 (logica1)
I'd like to make Win7 hidden (and deactivated) when booting WinXP from lilo (and conversely). Following the lilo manpage I set up the boot items
# Windows bootable partition config begins
other = /dev/sda1
label = Win7
table = /dev/sda
[Code]....
Line 50 is indicated above. I have experimented with variations on the above, but still can't get lilo to accept my syntax.
View 1 Replies
View Related
Nov 21, 2009
I have a dual-boot system, Windows XP on primary HDD and Fedora on Slave HDD. NTFS -3G is installed in Fedora, but I would like to hide (or not mount) Windows system partition on Fedora boot, as I have multiple users in Fedora and do not want them to access this partition. I do want to mount/display my NTFS D: partition in Fedora. Is there a way to exclude an NTFS partition from mounting by default?
View 6 Replies
View Related
May 29, 2010
I have 2 drives formatted NTFS, which I'm mounting with /etc/fstab to ~/Movies/ and ~/Music/ and an EXT4 partition on my primary drive for games, mounted to ~/Roms/ and I would like for these drives to NOT show up in the side panel of nautilus.
I've been doing some looking around, and what I've found so far is that supposedly if you mount a partition/drive somewhere besides /media/ nautilus will ignore it. I'm finding this not to be the case, and it's driving me bonkers. here's my fstab:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code]...
View 9 Replies
View Related
May 11, 2011
I'm just wondering because I'm going to to test out just how many partitions I can make and mount on GPT. Is there a theoretical limit on the amount of partitions or mounts allowed? I was thinking there would be depending on if you were running i386 or x86_64 because both can only handle up to a certain interger.
View 7 Replies
View Related
Oct 13, 2010
I have 2 partitions on my computer:one is "64 GB ext4" (with Ubuntu 10.10 64-bit)and the other one is "Data 436 GB NTFS" (just for storing files)On startup the second partition is not mountedefore I click on "Locais" this is in Portuguese (the button between Applications and System on the top bar) > "Data".
View 14 Replies
View Related
Jan 14, 2011
My Laptop has Ubuntu 9.04 and I am using it for the past one year. I have four partitions. Gparted Screen Shot attached.
/dev/sda5 was mounted as "Laptop 2"
/dev/sda6 was mounted as "Laptop 3"
But from today morning I was not able to access any of the files from my hard disk. When I press the "Computer" Menu Item from the "Places" menu I could access all the files on my hard disk. It shows an error message attached with this thread. The system boots perfectly and work perfectly. "Laptop 2" and "Laptop 3" disappeared.
I searched the net and found ways to mount the Partitions with these following commands.
sudo nano /etc/fstab
# /etc/fstab: static file system information.
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5) .....
Is there any way I could use "Laptop 2" and "Laptop 3" as my mount points as it was earlier.
View 9 Replies
View Related
Mar 19, 2011
Does anybody know how to have partitions (not removable media) auto-mounted at boot?It would be great so I do not have to click them for first use.By the way, may it be pre-configured in ubuntu to do that for everyone?
View 1 Replies
View Related
Oct 8, 2010
I've carelessly installed grub on hda5 instead of hda, using:
# grub-install /dev/hda5
And now my hda5 cannot be mounted with ntfs-3g. Here the error message 'mount' gives:
Failed to mount '/dev/hda5': Invalid argument
The device '/dev/hda5' doesn't seem to have a valid NTFS.
As far as I know, grub-install rewrites the 1st sector of the device, and I've been reading this guide on recover the 1st sector of an NTFS partition. The problem is that the Disk Probe tool is available in Windows only. Is there any similar software in Debian to do the same thing (i.e allows us to edit sectors of the hard drives available in the computer)? Any easier tool / method to restore the NTFS partition without read and write sectors manually.
View 4 Replies
View Related
Feb 7, 2010
uh, I screwed up. I mounted the wrong thing with ntfs-config. Now, this really isn't a big deal but... It'd be nice to have it organized and a 11 GB partition not mounted on boot
View 1 Replies
View Related
Apr 30, 2010
I've been searching for a solution get mount my NTFS FakeRAID automatically when 9.10 64-bit starts, but haven't managed to find a solution.Currently, after boot, dmraid activates my RAID automatically but does not map the partitions on the drive:
Code:
$ ls /dev/mapper/
control isw_bibdafajea_Vault
[code]...
View 4 Replies
View Related
Aug 29, 2010
I have samba installed. I also have a Windows NTFS disk mounted on Ubuntu. To share the file, I migrate to the folder with the file manager, right click on it and select "Sharing Options". I get the message
'net usershare' returned error 255: net usershare add: cannot share path /mnt/Windisk/<path> as we are restricted to only sharing directories we own. Ask the administrator to add the line "usershare owner only = false" to the [global] section of the smb.conf to allow this.
[Code]...
View 9 Replies
View Related
May 26, 2011
Created partitions, some of them LVM, in a server, say A. Did the same for another server, B, but created one more LVM partition.
Installed RHEL in A, and some other applications. Made dump files for each partition of A and restored all of them them in B. No error in that process, except B wouldn't boot. Did chroot /mnt/sysimage and grub-install /dev/sda--still no good. B came to a halt with GRUB> dispalyed. <tried many things many times.. searching Googles..but w/o luck) Gave up, and restored the bootloader part using OS CD -- I say restored because now B boots ok and I can see application that I had installed in A. So far so good.
Problem: that extra LVM partition is missing! I did not knowingly overwrite it, so where did it go? Somebody is keeping it from being displayed!
Is it the grub.conf that tells the OS what to mount and what not to? If yes, problem is , grub.conf is missing in B. In A, it is in /boot/grub/. df -kh shows other partions (some of them LVM) just fine.. what is going on?
I tracked a file called menu.lst in a strange place, in /usr/share/doc/grub-0.97.. but I didn't see any entry that loads partitions.
View 1 Replies
View Related
Jul 25, 2011
when i try to change permission for any file under mounted ntfs partitions (without any errors) it remains the same after changing.
#cat /etc/fstab
Quote:
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext4 defaults 1 1
/dev/sda1 /win/C ntfs-3g fmask=111,dmask=000 1 0
[code]....
View 9 Replies
View Related
Sep 17, 2010
I have a windows partition mounted that will not allow me to load my kubuntu 10.10 meerkat. i can enter an older kernal but my older kernal says cant contact kded and all my kde apps will not work such as wireless networking and autp ip configurations. although i can run the internet in this kernal wired however manually putting my ip and other numbers in for wireless connection fails. all other kernals do not load because they say i have a ntfs drive mounted. so my question is how can i unmount this drive and make my kernal work again or how can i fix kded from crashing on my second kernal so i can use that one. i have already tried sudo unmount /media/windows and other simular commands i also tried a mounting app and reinstalling kubunt desktop also check disk on windows with clean shut down does not work either.
View 6 Replies
View Related
Jun 1, 2011
i reinstalled opensuse yesterday.when i turn on my system every time i need to enter my root password to mount my partitons.please see the following image.i want to automount all partitions on startup without giving root password(before reinstalling opensuse it didn't ask root password to mount my partitions)
View 9 Replies
View Related
Jan 20, 2011
I am using direct mounts because I like being able to cd to the directory and use tab completion..versus indirect mounts where you can not do that since the directories are virtual.But, why does the /proc/mounts show these directories mounted(I have not cd to them)? Are they technically mounted? The reason why I use automount is because if I ever have power failures at least not all filesystems that are not being used will be unmounted and not corrupted.
Code:
localhost init.d # cat /proc/mounts
rootfs / rootfs rw 0 0
[code]...
View 2 Replies
View Related
Sep 3, 2011
I have a few NTFS volumes in my machine. The fstab looks like this:
Code:
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD322GJS2BJJ9EB609339-part3 swap swap defaults 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD322GJS2BJJ9EB609339-part4 / ext4 acl,user_xattr 1 1
[Code].....
View 4 Replies
View Related
Jan 28, 2009
I am using centOS-5, I have mount NTFS drive by using fuse. But there is no rights and even there is no option on right click to make new directory or to del any file or folder. This is line of fstab for NTFS drive
/dev/sda5/mnt/dntfsdefaults2 2
How can I get full access and control on this NTFS mounted drive.
View 1 Replies
View Related
Jan 6, 2010
I have deleted a file from linux SuSe 11.2 in mounted NTFS(Windows XP) partition, is there any chance to recover it? I've tried using Hiren's Boot CD revovery tools without any success
View 3 Replies
View Related
Jan 4, 2011
Is it possible to forbid a non-root to umount a partition that was mounted via fstab-entry?
View 2 Replies
View Related
Apr 18, 2010
I have two partitions in LVM. They are added in /etc/fstab to mount automatically. But, they are not working. The process to mount partitions seems to be happening before the service /etc/init.d/lvm2 is started. I can get it mounted using "mount -a" command, but not during the boot time. What should I do get it automatically mounted on every boot?
View 5 Replies
View Related
Apr 29, 2009
I know I do fdisk -l /dev/sda and see all the partitions on that disk, and I know I can do mount and see all the mounted partitions. Is there a way to do both at the same time? Ideally what I'd like to see is the output of fdisk -l but with an additional column that shows if a partition is mounted or not.
View 2 Replies
View Related