Ubuntu :: HP J6480 - Scanner Not Found?

Mar 3, 2010

Having spent hours and hours on this, I'm ready to give up on Ubuntu. Whenever I run Xsane or Vuescan, I get a message telling me there are no devices available. Op system is Hardy.HP J6480 is conected to network hub.Vuescan works fine under Windows 2000. Printing works fine from UbuntuI have repeatedly installed HPLIP.I have run hp-check and loaded all the dependencies it told me it couldn't find, reducing the number of errors from 9 t(mostly compile time) to 3.Hp-check finds the printer ok, but tells me no scanners were identified.The silly thing is that before I re-installed Ubuntu I managed, somehow, after a lot of work, to use Xsane.

View 1 Replies


ADVERTISEMENT

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: HP C4640 Device Not Found Scanner?

Apr 20, 2010

I just got a new scanner HP Photosmart C4640 and tried to set it up on Ubuntu 8.10SANE has it as supported, but I can't scan.Printing works fine. when I run xsane I get

Code:
Failed to open device 'v4l:/dev/video0': Invalid argument.
Poking around I found ScanningHowTo page. But I was unable to find the .fw, .usb, or a PPD

[code]....

View 3 Replies View Related

Ubuntu Installation :: HP LaserJet 3300 Scanner Not Found?

Nov 30, 2010

I've got an HP LaserJet 3300 all-in-one that I can't seem to get working as a scanner.Printing and copying work fine, but not the scanner function. I'm running kubuntu 10.04, but my guess is that kubuntu vs. ubuntu doesn't matter here.I'm using an IEEE-to-usb cable to connect the device to my box. When I first plug it in, cups recognizes it, and I see a popup in the lower right of my screen entitled "printer applet" and saying configuring new printer". Then it says "hp-laserjet-3300-3310-3320 is ready for printing". After this, printing works fine.But no scanning. lsusb doesn't see the device:

[brett@grox:~]$ lsusb
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[code]....

View 4 Replies View Related

Hardware :: Hp Psc 1110 Scanner Not Found?

Mar 6, 2010

I run Ubuntu Karmic (9.10) and have a hp psc 1110 connected by usb. The printer works fine (with hplip and cups). And sane-find-scanner answers:

Quote:
found USB scanner (vendor=0x03f0, product=0x3011) at libusb:005:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

However, scanimage -L reports "No scanners were identified. The strange thing is that the scanner used to function (with xsane as front-end) a few weeks ago. Somehow I broke this functionality, possibly when I installed drivers from HP to get better options for the printer part (e.g., switch color cartridges off). Any idea where I need to look to get it running again?

View 4 Replies View Related

Slackware :: 13.37 And EPSON Stylus TX120 Scanner Not Found

May 18, 2011

I'm trying to set up my EPSON Stylus TX120 multifunction, and i've successfully installed the printer, and for the scanner i followd the instructions from avasys page: installed iscan-data and iscan (core) compiling them from source with no problems using --prefix=/usr in both packages, but when i run sane-find-scanner no scanner is found. If i try using scanimage -L only my webcam is listed, so, is there anything else i have to do in order to get my scanner detected in slack 13.37? I've run both commands as root, by the way.

View 6 Replies View Related

Fedora Networking :: Setup A Wireless Connection Between F10 And A HP J6480?

Mar 22, 2009

I am trying to setup a wireless connection between F10 and a HP J6480. I dnloaded the linux driver hplip-3.9.2, disabled the SELinux and ran the install. When I choose method of connecting - wireless it would not discover the device. The only way was to enable the USB descovery. Doing so, the computer found the printer and all is fine. What am I missing trying to enable the wireless connection. Note, that during this process, the USB was not connected. Also, I dual boot with Vista and I can run the printer wireless.

View 7 Replies View Related

Fedora :: Error - Found USB Scanner (vendor=0x04a9 [Canon], Product=0x2213 [CanoScan], Chip=GL841?) At Libusb:001:006

Aug 1, 2009

Since installing F11, my Canon LIDE 50 scanner refuses to work. xsane 0.996 produces an error message: Failed to start scanner: Error during device I/O.

sane-find-scanner says it is there: found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841?) at libusb:001:006 But scanimage -L claims: No scanners were identified.except once when it admitted: device `genesys:libusb:001:006' is a Canon LiDE 35/40/50 flatbed scanner

I reluctantly tested the scanner on a Windoze machine and it works perfectly. And it worked perfectly under F10.

View 9 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Debian Hardware :: Scanner HP M1319f MFP / Cant Use The Scanner?

Oct 22, 2010

my scanner used to work in lenny, now im using squeeze fresh install.

i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.

normal user and sudo see the scanner with

$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....

i know my user is in group lp and scanner root cant use the scannner either.

View 1 Replies View Related

Ubuntu Multimedia :: 06a2:0003 Topro Technology - No Camera Found - Skryba Says No Devices Found

Mar 29, 2010

I have been trying to get this web cam working for a long time. lsusb:

Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg

Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]

Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?

[Code]...

View 3 Replies View Related

Ubuntu Servers :: 9.10 2nd Ethernet PCIe Adapter Found Then Not Found?

Jan 24, 2010

During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.

View 3 Replies View Related

OpenSUSE Install :: Installed Program Not Found - Kmess: Command Not Found

Oct 1, 2010

I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:

Code: kmess: command not found I checked into Yast and it seems to be installed correctly!

View 9 Replies View Related

Ubuntu :: Scanner Not Seen On 10.10

Oct 28, 2010

I've been using a Nikon Coolscan 4000ED on Ubuntu for a couple of years via Vuescan with no problems at all.

The other day I upgraded to 10.10 and Vuescan can no longer see the scanner. So I tried X-Sane and Simplescan and they both say there is no scanner even though it's connected and switched on. So for some reason, Ubuntu 10.10 cannot see the scanner or perhaps the IEEE connection.

View 2 Replies View Related

Ubuntu :: Getting A Mac Virus Scanner?

Aug 1, 2010

I have a mac, but I have a lot of files on my Ubuntu machine, that i'd like to transfer over, but I would like to make sure they are clean.

View 2 Replies View Related

Ubuntu :: 10.04 LTS Compatable Scanner?

May 7, 2011

what scanner to buy to work out of the box with Ubuntu 10.04 LTS

View 7 Replies View Related

Ubuntu :: Scanner And Printer Used As A Copier?

Jan 16, 2010

I am delving into the world of scanners for the first time. With 9.04, my Cannon CanoScan LiDE 25 works without a hitch in ScanLite and Scanner Utility but not in XSane. I am able to scan photos and such and get good quality images. I have an infrequent need to make copies of pieces of paper and have been experimenting a bit trying to make my scanner and printer act like a copier. what type of images to take and how to print them?

View 1 Replies View Related

Ubuntu :: Can't Get Epson Scanner To Work

Feb 11, 2010

I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.

View 3 Replies View Related

Ubuntu :: Can't Get The Scanner Recognized By Xsane ?

Mar 4, 2010

I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.

I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.

Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.

The printing side of things works fine but I can't get the scanner recognized by Xsane.......

View 5 Replies View Related

Ubuntu :: Can't Use Scanner On Brother DCP 7020

Mar 7, 2010

I'm using 9.10 on x86 architecture. I've searched the forums and anything related to scanning talks about editing /etc/udev/rules.d/45-libsane.rules which doesn't seem to exist on my system. Judging from the dates most of these posts probably relate to intrepid or jaunty. XSane just says 'no devices available'. Printing works fine.

View 6 Replies View Related

Ubuntu :: Epson GT-S50 Scanner And Drivers?

Mar 31, 2010

Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????

View 1 Replies View Related

Ubuntu :: USB Scanner Not Detected By Any Programs?

Sep 13, 2010

I have an Epson perfection V100 Photo scanner. When I open any programit will not detect the scanner. Simply plugging in the scanner and crossing fingers does not work.sane-find-scanner returns the following:

Code:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your

[code]...

View 6 Replies View Related

Ubuntu :: Can Not Get A Network Scanner To Work / What To Do?

Nov 8, 2010

I'm trying to get a network scanner to function. I've been following the guides here:

http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo

And I think I am just misunderstanding something.

1. The scanner is properly functioning on the server side.

2. Both, the client and the server, have the package sane-utils installed.

3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)

4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!

5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?

6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.

View 4 Replies View Related

Ubuntu :: Cant Get Mfc 8660dn Scanner To Work

Mar 21, 2011

I followed the instuctions in the ubuntu forums and i got the printer to work but i cant get the scanner to work, simplescan lists the printer but when i try to scan i get an error message.

The printer is a brother MFC-8660DN. I am running Ubuntu 10.10 on a Sony Viao tower, Pentium IV 512mb ram, Nvidia 4ti graphics card.

View 1 Replies View Related

Ubuntu :: Scanner Due To Discrepancy In Location?

Mar 29, 2011

I have just installed the drivers for the scanner on my brother mfc5460cn. Xsane recognizes the machine but cannot open due to an invalid argument. The problem seems to be that xsane is looking for the machine at bus 1 dev 1 however, lsusb shows the machine at bus 2 dev 5.

How can I fix the discrepancy? I've tried sudo chmod a+w /dev/bus/usb but there was no change.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved