Ubuntu :: HP Deskjet D2660 Will Not Print With 10.04?

Aug 16, 2010

I recently installed Ubuntu 10.04 on my computer. Everything works except for my HP Deskjet D2660 printer. The printer is recognized, but it will not print. HP-check shows no errors or warnings. The printer works fine on another computer with Ubuntu 9.10

View 4 Replies


ADVERTISEMENT

Ubuntu :: HP Deskjet D2660 Cartridge Alignment?

Dec 25, 2010

OS: Ubuntu 10.10 I've been trying to get my HP DeskJet D2660 printer to work for a while now, but I am having several problems that I can't seem to get around. For the driver I have 2 options. The hpijs (hplip) or the hpcups driver. Neither of them work properly.

The HPLIP driver and control software keeps telling me that the stuff I print has printed correctly, but my printer does nothing. It just sits there laughing at me whilst I get popups on my monitor telling me that the print job start and completes. I have successfully printed the print head calibration paper and aligned them as told by the HP software, but after I have done so, it just goes back to sleep. Nothing prints, not even the test page. I can't understand why it prints the calibration sheet just fine and then, afterwards, it won't print anything else but tells me everything prints fine.

The HPCUPS driver works just fine, but it has these really bad shadows on everything I print caused by incorrect alignment of the print heads. There seems to be no option of correcting this using the HPCUPS driver. So, what I have is a HPLIP driver which allows me to calibrate but won't print, and a HPCUPS driver which prints just fine, but won't allow me to calibrate. My HPLIP driver version: 3.10.6 (official from Ubuntu) I've also tried downloading and installing the latest (3.10.9), but with no luck. Prints calibration just fine, then nothing else.

View 1 Replies View Related

Slackware :: Setting Up HP Deskjet D2660 In 13.0?

Sep 12, 2010

I tried setting up my printer, HP Deskkjet D2660, using CUPS. I enabled the CUPS service and configure the printer through it. But when I try to test print, my printer wont print.
Now, i tried to look at the net for possible answer and somewhere, I read that my printer needs the newer version of hplip than the one included with the default slackware 13.0 install.

1. Do i really need to update hplip just to make my printer work? Do anyone uses the same printer model and make it work without updating the said package?

2. If i really have to update it, is there any Slackbuild script I can use to make the hplip-3.10.6.tar.gz into slackware package? I prefer creating package than installing using make.

View 3 Replies View Related

Ubuntu :: HP Deskjet D-2660 - Can Print To File But Not The Printer

Aug 5, 2010

My HP Deskjet D-2660 will not print. I can print to file but not the printer. I am running Ubuntu 10.04 and have no other problems. I have installed hpip and hpijs form HP and cups was made available via and upgrade. I have a lot of data from var/log/cups/error_log but don't know what it is supposed to say.

I can print to file and everything else I check seems to say that all is right. Is there any glaring faults that I should look for?? As I stated on the other post I get a message that the print job has been sent to the printer and then another message stating that the print job has completed. In system/administration/printing, the printer shows up properly and has a green check mark on it. Connected to localhost shows at the bottom of the little window. Under /printer it shows shared and enabled Then under printer/properties, it shows as the HP Deskjet D2600 series the location is given as john-desktop It defines the Device URI: hp:/usb/Deskjet_D2600_series?serial=CN9ANDF0ZT05C9 shows the Make and Model HP Deskjet d2600 Series hpijs,.. printer state: idle

Across the bottom it theoretically allows you to print a test page or clean the print heads. (won't print) On the printing-local host small page that opens under system/administration/printing there is no group under that heading only new group or new group from selection. I never named a group since I am the only user.

I have shut the printer down and disconnected the USB and rebooted. Then connect the power and plug in the USB cable I get all the same answers nothing appears to change. Here is some of the var/log/cups/error_log file. It does this over and over every minute same thing. The print que is empty from both administration and applications.

[Code]....

View 2 Replies View Related

Ubuntu :: Hpcups Not Installed - Unable To Print On My Hp Deskjet 1600

Dec 15, 2010

After a recent update, I suddenly find myself unable to print on my hp Deskjet 1600;

I have the necessary software; the HP management tool is on my panel and I use it.

When I attempt to print now, I get an error that says "hpcups is not installed".

Here is the output of the troubleshooter

Code:

View 1 Replies View Related

OpenSUSE Hardware :: Can Not Print On Hp Deskjet 710c / Sort It?

Feb 4, 2010

I'm an happy user of 11.2 but I've a weird and very annoying problem with my old but still good for me hp 710c Printer.

I should say that I have this problem on with 11.2 because printer runs well either on windows or with other linux distro.

the problem is that when I try to print anything I get:
/usr/lib/cups/filter/foomatic-rip failed

I've found an other thread (11.2 - Cups ends /usr/lib/cups/filter/foomatic-rip failed - openSUSE Forums) regarding the same problem but with 11.2 milestone 1 and the solutions seemed to be to downgrade to an older cups and ghostscript version.

View 9 Replies View Related

Ubuntu :: Deskjet 940c Wouldn't Print - Errors With Communication And The Initial Device?

Apr 19, 2011

[i use Ubuntu linux 10.04 LTS - the Lucid Lynx] i tried to print a document and i got the following message from the "document print status (my jobs)": "There was a problem processing document 'take it easy' (job 400)" i tried to print other things but i got the same error. after any print request i sent the printer asked me to release the paper it took, and when i release it, it printed this:"Unable to open the initial device, quitting." i have "HP Device Manager" installed on my computer, and lately i tried to install a wireless printer (officejet 4500 g510n-z) through it, and it failed because the connection between the printer and my computer disconnected before the terminal finished the installation. i didn't try to print with the deskjet right after it but now when i try- it doesn't work, so it might have something to do with my current problem... also when i looked at the HP Device Manager i saw the deskjet printer icon marked with X so i used this program's option "Setup Device" and the X mark disappeared.. and it still doesn't work.

View 2 Replies View Related

Ubuntu :: Printing Corrupted - Get Substituted / Print A Blank Space / Print A Box

Mar 23, 2011

Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.

I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.

View 2 Replies View Related

Ubuntu :: Cannot Print PDF Files - Print Preview Shows A Blank Page

Jun 5, 2011

I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:

Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault

Converting to .ps also is blank.

View 6 Replies View Related

Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos

Dec 26, 2010

My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?

View 5 Replies View Related

Ubuntu Networking :: Connected Via Usb File Goes To Print Que But Will Not Print ?

Aug 14, 2010

Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.

View 1 Replies View Related

Ubuntu :: USB HP Deskjet D1420 Printing

Jan 9, 2010

I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.

[Code]...

View 6 Replies View Related

Ubuntu :: HP Deskjet F2430 Not Connected?

May 31, 2010

I seem to be having on going issues with my printer. I was able to print a garbled test page but I get a result from terminal of printer HP-Deskjet-f2400 now printing HP-Deskjet-f2400-0. enabled since Mon May 31 15:45:04 2010 Connecting to printer... and it just sits there. Nothing is in error with the printer itself though.

I have enabled 2 screenshots.

View 9 Replies View Related

Ubuntu :: Install HP Deskjet Printer?

Dec 23, 2010

When I go to System->Administration->Printing no window pops up. Down on the bottom panel it says "Starting Printing" and then goes away. I'm trying to install my HP Deskjet printer,

View 3 Replies View Related

Software :: CUPS - Print Jobs Shows Completed, But Page Doesn't Print?

Dec 6, 2008

I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.

Code:
# Show troubleshooting information in error_log.
LogLevel debug

[code]...

View 8 Replies View Related

Software :: Firefox, Okular Don't Put Print Job On The Print Queue (silently)?

Feb 16, 2011

I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.

View 1 Replies View Related

Slackware :: CUPS Print Jobs Print 1st Page OK, But All Others Are Overwritten?

Feb 26, 2011

Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.

View 14 Replies View Related

Ubuntu :: Hp Deskjet 2050 Xsane Support?

Mar 20, 2011

anyone know if the scanner is supported lucid 10.04.2.it is downloading updates now hp-setup does not work on it.Bus 003 Device 004: ID 03f0:8711 Hewlett-Packard scanimage -L did not find it

View 1 Replies View Related

Ubuntu :: HP Deskjet 3420 Printer Not Working

Jul 7, 2011

After clicking on the print option on ms -word, printer does not respond! In the print dialogue box it shows that ink cartridge empty, but even after refilling it, it shows the same status!

View 1 Replies View Related

General :: Print Multiple Independent Pages In One Print Job?

Mar 23, 2010

How can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.

I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.

View 1 Replies View Related

Ubuntu Installation :: 10.04 Quit Printing To Hp Deskjet D1660

Aug 26, 2010

I recently installed 10.04 and the printer was working for a while. Now when I print something the print que icon shows up and goes out like it has printed but nothing prints. I ran the troubleshooter and got this.

Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dest': <cups.Dest HP-Deskjet (default)>,

[Code].....

View 1 Replies View Related

Ubuntu :: HP Deskjet F2100 Series - Prints Coming Out Red

Aug 8, 2010

I was trying to print my resume and a job application with my printer and it was coming out red (I now know how to fix that) but I decided to install the hp linux printer driver and it picked up my printer installed everything for it (its a hp deskjet f2100 series) and now it wont print ! I've got a troubleshoot.txt file for any technical info if you need it. (I had to compress it but its a 80 kb text file).

View 8 Replies View Related

Hardware :: HP Deskjet D1660 In Mint 7

Apr 26, 2010

I have spent a few hours on this, trying various combinations of instructions. The nearest I got was when I followed the instructions from the HPLIP site, but it ended up with telling me some dependencies were not installed. I installed them using the Mintinstall tool, but still no go.

Before I spend any more time on this, I would like to know if there is a user out there who has got this particular printer to run on the Mint 7 distribution? If somebody has, then I know it is at least possible, and I will persevere!

View 6 Replies View Related

Hardware :: HP Deskjet F4580 Installation

Feb 27, 2010

We recent got this printer as the three others are old, hard to maintain, and don't work. However, there's been no end of trouble. We've had to initially install it under Windows, which is no trouble. Intending to put it to wireless use, I've hit a problem. The HP printer tool in Slackware 13.0 claims that CUPS either isn't installed (which it is) or isn't running (which it is)

So I kept it on USB and shared it, providing yet more trouble. Slackware again seems to have trouble with CUPS (using the Printing tool from GSB). Now, Ubuntu Jaunty, the other Linux on the network, can see this printer, but doesn't have a driver for it, meaning it can't use it.

What I'd like to do is switch it to wireless. I can do that, but I don't know what to install on the two Ubuntu PCs to get the HP printer tool, or if on Jaunty, it still needs to be given the drivers for it, and on Slackware, CUPS is the problem (Though may be solved with an install of something else before long)

View 6 Replies View Related

Ubuntu Servers :: HP Deskjet - Lp Output Three Lines Only (NOT Header Or Date)

Jan 13, 2011

10.10 Headless Server, CUPS queuing to HP Deskjet via socket correctly (?), but output regardless of file type only top three lines (NOT header or date or so)

View 1 Replies View Related

Debian Hardware :: HP F2483 Deskjet All In One Printer?

Jan 22, 2011

I installed the Printer, but Xsane does not recognize the scanner, how can i acivate the scanner. my system is Debian Lenny 507 Kde i386. I have looked through the posts in the forum, but found nothing that can help me. can somebody point me in the right

View 14 Replies View Related

OpenSUSE Hardware :: HP DeskJet D1660 - Cannot Install GCC

Aug 5, 2010

I am attempting to install my hp Deskjet D1660 printer and I am getting a dependency error that states I am in need of the GNU gcc C+ or C++ compiler. I know I have the latest gcc compiler installed on my system already. I am running SUSE 11.3.

Code:
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: This installer cannot install 'gcc' for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.

Code:
# zypper install gcc
Loading repository data...
Reading installed packages...
'gcc' is already installed.
No update candidate for 'gcc-4.5-4.2.i586'. The highest available version is already installed.
Resolving package dependencies...

View 4 Replies View Related

OpenSUSE Hardware :: Deskjet-F2200 Is Not Printing?

May 5, 2011

The Printer works when printing Test Pages.

I want to print an image on GIMP and, in the General TAB, appears:

Status -> /usr/lib/cups/backend/hp failed.

View 1 Replies View Related

Fedora :: HP Deskjet F4140 - Can't Setup In FC13

Jul 10, 2010

FC13-i686/KDE

Can't install a HP Deskjet F4140 in FC13.

I have installed;

1. All Cups rpm's
2. Gutenprint-cups
3. All the hplip rpms
4. hpijs

And I still can't get the HP Deskjet F4140 to show up in Selection Window. I have even run HP-Setup and it can't install the F4140 . HP-Setup can see the F4140 is on USB port but can't install it.

I went to the HP website and it says the printer is Supported in the hplip drivers

View 5 Replies View Related

Hardware :: Double Side Printing HP Deskjet?

Feb 25, 2010

I'm using a HP Deskjet F380 multifunction printer on a ubuntu 9.1 machine. It recognises it as an F300 series printer and so far it prints and scans very well. The problem is that I usually print 2 pages per sheet and double side on windows but I cannot do it on linux (in this case the option of printing odd pages first and even pages second is useless). I see there is an option in your printer preferences to print double side but it doesn't work.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved