Ubuntu :: Don't Have Permission To Access This File On Server

Jan 20, 2011

i was install ubuntu server with desktop and when i try to open my ip adress in browse it show me this

You don't have permission to access this file on this server. Cheyenne/2.2.8 Server at localhost Port 80.how can i fix it.My IP address is, you can see the directory forbidden error if you type in my IP address.

View 3 Replies


Red Hat / Fedora :: Cant Access My Site. Forbidden You Don't Have Permission To Access / On This Server

Feb 9, 2010

Have no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com

but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.

View 2 Replies View Related

General :: Windows Access The File From Ubuntu Got Read Only Even Though Have A Full Permission To Read, Write And Execute The File?

Feb 4, 2010

What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.

View 1 Replies View Related

Fedora :: How To Give Permission To Access Any Folder And File?

Apr 21, 2011

How to give a permission to access any folder and file

View 2 Replies View Related

Ubuntu :: Give Two Client Users Permission To Access Their File System?

May 1, 2011

The desktop computer of my two children has a total of three users:

1) The superuser (me)
2) The user 1001 (my elder son)
3) The user 1002 (my younger son)

Both users 1001 and 1002 can not access their files system, and also they can not save any attachments from incoming mails.

What I tried so far:
I accessed the file manager as superuser, and went: >Root>Home. Here I right-clicked on the folder User 1001, selected properties, selected the tab 'permissions' and allowed this user to read and write into this folder. I also checked the checkbox �extend this permission to all subfolders and its contents.

The problem is, when I reboot, everything is 'forgotten' and I am at quadrant zero again.

Eventually I should state that part of the folders are from a backup drive, because the hard disk had to be replaced so, once I re-installed the OS on the new hard drive, I copied the folders from the backup drive into the home folder.

One last question:
Is there a good tutorial about permissions?

View 9 Replies View Related

Server :: Access Permission In Samba?

Jan 25, 2010

I'm new with Samba and have access problem with Samba on Rhel 5. I want to share iso directory, and user admin can read and write while user bill can read only. smb.conf file looks like this#======================= Global Settings =====================================

workgroup = CORP
security = SHARE


View 3 Replies View Related

CentOS 5 :: You Don't Have Permission To Access /php.php On This Server

Jan 4, 2011

I installed php yum install php. when i go to localhost it loads index.html ok but when i type localhost/php.php it says

You don't have permission to access /php.php on this server.

Here is a line in my httpd.conf file

View 10 Replies View Related

Ubuntu :: Error - Forbidden You Don't Have Permission To Access /moodle On This Server

Feb 10, 2011

installation moodle on Ubuntu 10.04.1 LTS.at localhost show message It works!at localhost/moodle show message Forbidden You don't have permission to access /moodle on this server.

View 1 Replies View Related

CentOS 5 Server :: HTTPD - Forbidden Dont Have Permission To Access /index.html?

Mar 3, 2010

Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.

View 2 Replies View Related

Fedora Networking :: Samba Server Not Shown In System Administration / Give Permission To Access Home Folder?

Jul 1, 2010

I installed samba server in my external HDD. But it is not shown in system ----> Administration. Is there any problem. Then How to give permission to access home folder.

View 3 Replies View Related

Server :: File Transfer From Fedora Desktop - Permission Denied

Nov 26, 2010

I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-

Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.

View 5 Replies View Related

Server :: Saving A File Removes The Group Execute Permission?

May 23, 2011

Here are some example files that are shared through samba:

-rwxrwx--- user1 group1 file1.txt
-rwxrwx--- user1 group1 file2.txt

When user2 (who is also a member of group1) edits file2.txt the permissions change:

-rwxrwx--- user1 group1 file1.txt
-rwxrw---- user2 group1 file2.txt

user1 then has issues opening the file. This also goes for new files that are created (they are missing the group execute permission).

I have set the option "create mask = 0770" in my smb.conf. Without this set, permissions default to something like -rwxr--r--

View 1 Replies View Related

Ubuntu :: Share File Permission \ Some One Copy Their File In This Folder The Permission Is Marked As "no Group" "no Owner"?

May 18, 2011

I'm using ubuntu 11.04, I'm having some problem of ownership while sharing folder/files. to share i change the folder share option:1. Share this folder, then followed by 2.allow others to create and delete files in this folder3. guest access.Now if someone in my local network edit any file and save it, it gets locked. if some one copy their file in this folder the permission is marked as "no group" "no owner". and they get unaccessible to me. i tried doing chown <user> <folder> but it says Operation not permitted. Now how i can possibly share my folder on local network so that they can be edited by others without getting locked down , if they copy files i can able to modify them.

View 2 Replies View Related

CentOS 5 :: Creating Link - Error "Forbidden You Don't Have Permission To Access / Recordings On This Server"

Mar 13, 2009

I have two folders as :

drwxrwxrwx 2 root root 1368064 Mar 10 18:28 monitor
drwxrwxrwx 7 root root 12288 Feb 18 17:07 monitorDONE

I have created one short cut link for this folder with below command :

ln -s monitorDONE recordings lrwxrwxrwx 1 root root 11 Mar 13 14:30 recordings -> monitorDONE This link is under /var/www/html Now, when I do IP/recordings It show me an Error as Forbidden You don't have permission to access /recordings on this server.

View 19 Replies View Related

Server :: Access Ubuntu File Server If It's Connected To A Router?

Feb 13, 2011

I want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.

View 5 Replies View Related

Server :: In Apache Server, Change Log File Location And Log Format For Access Log Fil?

Aug 19, 2009

I installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`

View 1 Replies View Related

CentOS 5 :: Apache Error 403 - "Forbidden You Don't Have Permission To Access /bb/ On This Server" - 5.2 With Apache 2.2.3

Jan 20, 2011

I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:

1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)

I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..

View 3 Replies View Related

Ubuntu Security :: SSH Server - Monitoring File Access

Oct 1, 2010

At our company we have a central server with client files. This server has a SSH server installed, and through Nautilus all employees can access the files. However, I have a few questions:

1. Most employees need access to all folders, because they might use them at some point in time. However, I want to make sure they are not accessing things they do not need. How can I do this? For instance, if somebody copies all of the folders to his/her computer, I want to be able to see this in some sort of log. Can this be done? Copying and accessing in general is what is of my concern.

2. Some employees only need access to specific folders. Can this be easily configured with SFTP?

3. Some also use SSH and type commands which I want to check every now and then (e.g. to make sure an intern is not again copying information or accessing folders they should not be in). What is a good way to do this?

View 7 Replies View Related

Ubuntu :: When Using Codeblocks IDE It Says That, Permission :access Is Denied?

Feb 22, 2011

I am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....

View 4 Replies View Related

General :: Access File On Different Server From Local?

Nov 19, 2010

I have a file 'my_file.txt' stored on 'myserver1.col.edu' Now, I am using a different server 'myserver2.col.edu' to do some work and I want to access 'my_file.txt' on 'myserver1.col.edu' to read (possibly edit) WITHOUT physically copying the entire file across. Is there a way to do this - perhaps through ssh?

View 2 Replies View Related

Red Hat / Fedora :: How To Access Windows File Server?

May 9, 2011

I am new to linux and know some basics, no proper knowledge of servers. I want to know is that how can i access my companies "fileserver" from linux (gui as well as from cmd line). This file server i can access easily from windows machine but i don't know how to open/access file server from linux machine..If can tell what tools are needed and also but is the process from command line.File server is windows server and my machines is Redhat linux.

View 3 Replies View Related

Server :: Cannot Access /var/log/apache2/*: No Such File Or Directory

Aug 24, 2009

I am trying to access log file which located in /etc/log/apache2. I could get into the directory using `su`. I was able to run ls command under the directory and everything was file. I could run a command,

ls -d /var/log/apache2/*

However after I switched to my account, I got an error. sudo ls -d /var/log/apache2/* ls: cannot access /var/log/apache2/*: No such file or directory

I want to use this command in a bash script to get a list of log files. Should I write the script as root and run it as root?

View 3 Replies View Related

Server :: Debian File Access Monitoring

Sep 16, 2010

I'm running a Debian/Samba PDC on a Windows network. We desire to monitor a few network shares, so that whenever a change is made to a file in those, we have a log of who did it and when. Some capability of seeing what the change was, or a way of reverting it, would be nice luxuries. But username and timestamp are most important, if possible.

On the debian forums, someone advised using Tripwire for this purpose. didn't give much other advice about it so I kind of struck out on my own researching tripwire. got it installed, played wth it, and found it problematic, to say the least. It seems a bit much on the complexity and security side, and it seems more oriented towards maintaining system integrity, than monitoring documents. So far I've not managed to get a policy update working on account of a cascade of errors about a few hundred files under /proc disappearing, despite no changes to the system.so I'm wondering if anyone here has advice.

1. Does debian have this sort of functionality built in? is there a system log I can parse to get this information?
2. Is tripwire the right application for our purpose?
3. Is there anything better suited, more user-friendly or more parsimonious. I don't need something to monitor all system files, guard against intrusion, and make me cups of tea, just to monitor a few folders that I specify

View 4 Replies View Related

CentOS 5 :: You Don't Have Permission To Access

Feb 15, 2010

I have a directory in /var/www/html with 777 permissions... when I try to access from another machine (on the same network - local) I get a permissions error I thought if I open recursively (chmod -R 777 directory_name) that I should be allowed to see the pages...

View 2 Replies View Related

Ubuntu :: KDE Wallet - 'grant Permission' To Access For Certain Applications

May 5, 2010

I'm using Kubuntu 10.04 at the moment. Every time I log in, KDE Wallet asks me to give a password so that Kopete can access my login password to login. Is there any way you can 'grant permission' to access the wallet for certain applications so that I don't have to fill in my password every time?

View 9 Replies View Related

Ubuntu :: Why Don't Have Permission To Access Own External Hard Drive

Dec 13, 2010

I've encountered a very frustrating problem. I have both my desktop and my laptop computer installed with Ubuntu 10.10 recently. And I use a external hard drive formatted in EXT3 as a backup. I created the EXT3 partition on my external hard drive using my laptop, but I cannot access those files using my desktop. What's going on? If one day I lost my laptop, does it mean even if I have backup, I can never access without my laptop??? How can I solve this problem?

View 9 Replies View Related

General :: Grant Permission And Access To Directories Using Ubuntu?

Jul 14, 2010

I'm having troubles with a download and I need permissions for the conig files and to have write-access to your ~/.loki/ directory and all sub directories. Does anyone know how to do this?

View 4 Replies View Related

Fedora Security :: File Access Honeypot For Server?

Mar 24, 2011

I'm trying to find a file access honeypot for our Fedora server.That is, if a local file is accessed, it should notify someone. Plain and simple..

View 8 Replies View Related

Server :: Grant Apache Read Access To File?

Sep 22, 2010

I am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.

View 1 Replies View Related

Server :: Lighttpd Access.log File Is 73 GB - How To Clear It Partially

May 19, 2010

I have an Ubuntu server running with lighttpd.

The file, access.log has utilized 73GB at: logs/lighttpd/, which contains data since 3 to 4 years (approx.)

So, i need to have only last 6 months logs in the file and the rest to be cleared.

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved