Ubuntu :: Command-line Only Boot?

Mar 4, 2010

Is there something I can add to my "menu.lst" file to give me the option to boot Ubuntu into command-line only without needing to edit system files every time I want to switch

View 6 Replies


ADVERTISEMENT

OpenSUSE Install :: LVM - Can't Boot Into X Window - Only GRUB Command Line During Boot

Nov 4, 2010

Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.

View 5 Replies View Related

Ubuntu :: 11.04 - How To Boot To Command Line

May 24, 2011

Despite my best efforts to have them use debian or ubuntu server, a client wanted ubuntu 11 on the new server they built. It runs all the services I need it to, but would be nicer to have that server boot to command line. It seems nothing is going to work. I have tried:

1. changing /etc/default/grub to "quiet splash text"

result: blank screen

2. sudo update-rc.d -f gdm remove

result: no change

3. echo manual | sudo tee -a /etc/init/gdm.override

result: blank screen

Has anyone gotten Ubuntu 11.04 to boot to command line out there?

View 3 Replies View Related

Fedora :: Run Python3 Scripts From Command Line And Call Up Python 2.6.2 Idle With The Command Idle From Command Line?

May 29, 2010

i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?

View 5 Replies View Related

Ubuntu :: Boot Into Command Line Mode?

Mar 14, 2010

EDIT: sudo /etc/init.d/gdm stop worked, not sure why it did not before. Sorry for the whining!

I need to boot Ubuntu into a non-x, command line mode. So I can install an nvidia driver for my new GeForce GTX 260 (I had a GeForce 7900 running on my Ubuntu system using the synaptic open source 185 driver for nvidia, but there is no driver except the one I downloaded just now from nvidia's site for the GTX 260 card). That requires there be no X session running, not even in a separate domain so to speak. There is no rescue mode in Grub2. Recover mode in Grub still boots an X session (Gnome). Alt+F1 appears to be a clean command line terminal but even that does not work because the nvidia driver installer script sees through that ruse and knows there is an active Gnome session. I tried sudo /etc/init.d/gdm stop and that did not work. I tried ctr+alt+backspace and that did nothing.

What can I do? I tell you some days linux is just too frustrating, about to just toss the baby with the bath water and go back to Winblows. Bought a new graphics card today, and here I am stuck not being able to even install the driver from a command line prompt, geesh.

View 3 Replies View Related

General :: Can't Boot Ubuntu To Command Line

Aug 8, 2010

Just installed Ubuntu 10.04 LTS as a VM on MAC OSX. I want to auto boot to the command line, but the GUI keeps coming up. I ran "sudo update-rc.d -f gdm remove", but it didn't work.

View 8 Replies View Related

OpenSUSE :: Boot To A Command Line?

Mar 12, 2010

Running 11.2, Is it possible to configure it to boot directly to a command line, outside of the GUI....as a default

View 9 Replies View Related

Ubuntu :: Cant Boot - Shows Grub's Command Line

Jan 9, 2010

i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.

View 2 Replies View Related

Ubuntu :: 9.10 Cannot Boot To Command Line Login Screen?

Mar 13, 2010

I have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"

View 3 Replies View Related

Ubuntu Installation :: Boot Directly Into Command Line?

Apr 6, 2010

I just installed a fresh install of 9.10 on my amd64. when it starts it locks up right away. i know that this has to do with my nvidia card. i've had to do this in the past. but since it locks up i have no way to get into the command line. ctl-alt-F1 does not work. is there a way to just have it boot right to the command line without loading up gdm?

View 1 Replies View Related

Ubuntu :: Lucid Command Line Ver Won't Boot After Install?

Sep 1, 2010

I did a clean install of Lucid from the alternate installer, onto a generic Intel/Celeron PC box. I used a command line only install, and used the entire hard disk; there's no other OS and no other partitions on the disk. Install goes along and finishes fine, reboots, and I can log in. But if I call sudo reboot, or shut down the machine then restart it, the boot process hangs. I see the POST screen, then a flashing cursor on a black screen for a few seconds, then the monitor goes into standby. I see no messages or any kind of output to the screen. I get the same problem using the Lucid Server installer and also when installing on a different box (Dell Intel/Celeron). I also tried running all the updates after install but before any kind of reboot...same thing.

This only seems to be happening using a command line only version of Lucid. Lucid GNOME/XUBUNTU install and work OK on both boxes. I can boot from a CD or USB key, but not sure where to look or what to check.

View 1 Replies View Related

Ubuntu :: How To Make Command Line Auto Run On Boot Up

Dec 20, 2010

In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........

Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.

Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.

View 5 Replies View Related

Ubuntu :: Pared Down Command Line For Faster Boot

Jul 8, 2011

Would be possible to have a dual boot with Ubuntu only loading the things necessary for command line use of emacs?

I thought it might be good to be able to take notes for class on a quickly booting command line. (It has the added benefit of being less distracting)

Does it work like that? Could a pared down command-line only install be sufficiently faster on boot-up? Might another flavour of Linux be more suited to the task?

View 4 Replies View Related

Ubuntu :: Lost Password - Can't Boot To Command Line

Sep 1, 2011

I don't recall my Ubuntu password.**

I found instructions regarding recovery.

They involve pressing Ctrl-Alt-F1 while booting the Ubuntu live CD.

If I allow the live CD to boot, I arrive at a Ubuntu GUI.

However, if I press Ctrl-Alt-F1, the monitor (HDMI TV) goes blank and indicates "no signal

correcting the password from a GUI (can I just go to a command prompt from there somehow, and work from that command prompt?) or getting my video to display when I press Ctrl-Alt-F1?

** (I remember trying to set up the system with NO password).

It's absurd to require one.

Especially so if a person with a live CD can simply change it (I guess at least the change would be detected).

View 1 Replies View Related

Debian Installation :: Boot To Command Line Rather Than GDM

Jul 28, 2014

What is the simplest way to boot to command line rather than gdm ?

I've seen post to change
# The default runlevel.
id:2:initdefault:
to
id:3:initdefault:

and

update-rc.d -f gdm remove
update-rc.d -f kdm remove
update-rc.d -f xdm remove

View 7 Replies View Related

General :: Set Parameter At The Boot Command Line?

Aug 20, 2010

I am following an instruction on the Internet to set up a timer=1. "You can force use of the timer interrupt by using the timer=1 module arameter (or oprofile.timer=1 on the boot command line" When I type "modprobe oprofile timer=1" at the command line, I got a warning message saying that "Deprecated config file /etc/modprobe.conf" So i want to try other way by setting it at the boot command line.

View 2 Replies View Related

Ubuntu Installation :: After Update Boot To Grub Command Line

Sep 29, 2010

I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.

View 4 Replies View Related

Fedora :: Unable To Boot Via Grub Command Line?

May 27, 2011

When I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie

Code:
grub>_

I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here

[Code]...

Thus boot configuration files have been lost..i think I have to install Fedora again

View 2 Replies View Related

General :: Linux/Grub Boot To Command Line?

May 15, 2011

Running Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?

Here's a method:

Alt-SysRq-e - Requests kernel kill all processes except init.

View 2 Replies View Related

General :: Boot Into The Command Line/console From Grub 2?

Jun 14, 2011

It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?

View 4 Replies View Related

General :: Debian 6 - Run Level - Boot To Command Line?

Mar 19, 2011

I have Debian 6 installed on my netbook which I tend to spend more time at a command prompt then gnome so I would like it to boot to the command line with the same services as the default with the option to "startx"

I tried ->

Quote:

1. update-rc.d -f gdm remove

2, Updated inittab

id:3:initdefault: --> from default of 2

No luck.

View 3 Replies View Related

Ubuntu Installation :: Wubi Doesn't Boot - Loads Grub Command Line?

Jan 1, 2010

My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.

Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.

View 2 Replies View Related

Red Hat / Fedora :: Command-line BIOS Boot Order Change?

Jul 15, 2009

I'm trying to automate OS installation. I've setup PXE and able to do network installation. For installation, I'm changing the BIOS boot order to boot from network.Once the OS installation is over, I need to manually change the BIOS boot order to boot from hard-disk. Can BIOS boot order be changed using programs/command-line so that i can eliminate human intervention in the installation process by changing back to the original boot order by program/commands?

View 2 Replies View Related

Ubuntu Installation :: Dual-boot On A RAID-0 Array - Drops To GRUB Command Line?

May 28, 2011

I've recently had trouble reinstalling my Ubuntu system as I was getting various unusual errors as described in my old thread here. I thought it was probably something to do with my RAID-0 array which was pre-installed on my laptop from purchase being corrupted or something like that (if it's possible). I decided to simplify things for myself (not understanding RAID arrays much) so I just removed the RAID array and installed Windows and Ubuntu on the now separate hard disks. It worked fine.

I noticed quite a significant performance drop, however, with even Ubuntu boots taking longer than 30 seconds despite my laptop being both high-spec and only a few months old. Windows, as you can imagine, was dreadfully slow. I wasn't entirely convinced that this was entirely due to the loss of the RAID array - as even low-spec laptops with presumably no RAID arrays are supposed to boot Ubuntu in under 30 seconds apparently - but I read that RAID-0 arra

View 8 Replies View Related

Fedora Installation :: Boot - Grub Drops Into Its Minimal Shell And Gives A Command Line

Jun 12, 2009

I'd like to say I'm very impressed with Fedora 11. I'm a long time Linux user and I've tried many distros. But, I usually keep only the best on my laptop. For a long time that was Ubuntu but, I think Fedora 11 has made some key improvements over Ubuntu and I'm eager to switch. The problem is: I haven't been able to run Fedora as anything other than on the Live CD. Everything works perfectly and it installs but, when I reboot, Grub begins. Instead of booting, however, Grub drops into its minimal shell and gives me a command line.

I've tried installing it a number of ways now and have read much about the problems with Ext4 on Grub and took special care to see that Grub has its own, separate, /boot ext3 partition. Even then, no luck. My hardware should work fine. I've got an HP DV-5 with 4GB RAM, AMD Turion 64-bit dual-core @ 2 Ghz, and an IDE 250GB hard drive. I'm working with the 64-bit Fedora 11 Live disc with KDE as the Gui.

View 10 Replies View Related

CentOS 5 :: Added Gnome And X To Command Line Only Install - How To Make X Start At Boot

Nov 5, 2009

I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?

View 3 Replies View Related

Ubuntu Installation :: 9.10 Server - When Boot It Only Boots To The Server Version And All Get Is Command Line

Apr 1, 2010

I was having so much trouble with ubuntu 8.04 that I deleted off my computer and did a fresh install of 9.10. I downloaded the 64 bit iso from the internet, burned it to a disc and installed it. When it asked if it should be the server version I thought I said no. Now when I boot it only boots to the server version and all I get is command line. Can I get out of this and get my regular ubuntu screen back or did I install the wrong version?

View 6 Replies View Related

Software :: Use Command Line To Split A Single-lined XML Into A Multi-line XML?

Dec 9, 2010

I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...

View 3 Replies View Related

General :: Command Line Way To View A Line Of A File With Context?

Feb 24, 2011

I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:

$ (something) -l 154 stuff.py
150: def foo(bar):
151: """

[code]....

View 5 Replies View Related

General :: Printing Command Line History Without Line Numbers?

Aug 22, 2011

How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved