Ubuntu :: Bluetooth Couldn't Parse The Incoming Data?

Mar 2, 2010

When trying to access my HTC Vogue via bluetooth, I can view all my files EXCEPT the music directory I made on my sd card (which is actually the one i wanted...). When trying to view it, nautilus gives the following error:

The folder contents could not be displayed. Couldn't parse the incoming data. A quick google revealed [URL]../+s...ez/+bug/310231 however I'm fairly noobish when it comes to compiling so could someone perhaps direct me with the commands? Edit: Sorry forgot to mention its the second post on that website.

View 1 Replies


Programming :: PHP - How To Parse Data Into Variables

Apr 17, 2011

My php knowledge is very poor (only worked with strings so far), and I am faced which a task that is a real challenge for me: I have a variable, that contains data of different type, in this order: byte, byte, string, string, string, string, short, byte, byte, byte, byte, byte, byte, byte, string.

Strings are of variable length. How could this data be parsed into variables of the right type, and then all converted to strings? What are the functions to use? Strings are unicode ones, and they are delimited by "

View 4 Replies View Related

Ubuntu Networking :: Bandwidth Monitor - How Much Incoming Data Had In The Last 24 Hours

Feb 18, 2010

I'd like to find some sort of program which can tell me how much incoming data I've had in the last 24 hours. It goes by hours, not by days, but anything that's simple and that can display this will do. Is there any sort of program that does this? Something that would fit well with Ubuntu's style wouldn't hurt, but I'm not that worried about it as long as it does the job.

View 1 Replies View Related

General :: Python Script Parse NMEA Data From GlobalSat BU-353?

Apr 7, 2010

Does anyone know where I can find a python script that will parse the lat/long data from the serial NMEA output of a BU-353.

View 1 Replies View Related

Ubuntu :: Couldn't Boot - This Directory Has Been Unmounted To Protect Your Data

Feb 14, 2011

I had issues on my last install , I couldn't boot into it cause I accidentally uninstalled python 2.6 and everything it was attached to. So I reinstalled on a separate hard drive, I can see my other file system from the media folder but the only thing in my home dir is these 2 files 1 read me that says

PHP Code:


From the graphical desktop, click on:


From the command line, run:

And then this file


But when I click it and try to run it I get this error

PHP Code:

View 6 Replies View Related

Programming :: Sending Binary Data To Bluetooth With Terminal

Aug 30, 2010

I am using centos 5, want to send a sets of binary data to other bluetooth device I know how to sent a file but dont know how to sent raw data. My case is like this I have a bluetooth device I need to send data to then after it process I need to get it back, I plan to do this all using terminal is that possible?

View 2 Replies View Related

General :: Redirecting Serial Data To An External Devices Using Bluetooth?

Apr 24, 2010

i have the following challenge: i have a Bluetooth GPS device that i have connected to my linux notebook. but now i also want to use the same device (or better, GPS data stream) for my Navigation device (HP Ipaq with TomTom). make an serial port bluetooth service (sending) that my Navigation device can connect to. copy the incoming bluetooth serial port data stream to the outgoing bluetooth serial port.

i have already installed GPSD so i have the TCP port where the GPS data is available for everything on my notebook. but now i also want it to send it out through bluetooth.

1. is there someone out there who already did this?

2. how to make an bluetooth serial port service on Fedora 12?

3. how to copy a data stream from 1 device to the next device?

View 1 Replies View Related

Red Hat / Fedora :: Couldn't Initialize KVM - Couldn't Open Disk Image - Permission Denied

Nov 13, 2010

create a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied

I've tried setting SElinux to permissive mode.

Fedora 14 X64
hypervisor qemu


View 2 Replies View Related

OpenSUSE :: Sync Pim Data With Palm Treo 680 Via Bluetooth - Jpilot Sync Suddenly Broken

Oct 24, 2010

I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.

The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?

View 1 Replies View Related

Ubuntu Networking :: Bluetooth - SPP Mode / Listen (and Also Send) To Serial Comm Msgs On Bluetooth?

Jun 25, 2010

i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.

I have Blueman Device Manager that enabled SPP (Serial Port) and it says :

Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?

I tried on console

$rfcomm listen 0
but it's stuck at
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?

View 1 Replies View Related

Ubuntu Networking :: Bluetooth Not Working With USB Bluetooth Stick / Resolve It?

Apr 24, 2010

When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.

View 1 Replies View Related

Ubuntu Networking :: The Bluetooth Manager Does Not Detect A Bluetooth Dongle?

Nov 2, 2010

The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?

Asus - BT211 mini bluetooth dongle

Code: http:[url].... - windows driver under download section.

Device manager

Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....

View 2 Replies View Related

Fedora Hardware :: Bluetooth Service / Bluetooth Is Disabled After Some Time?

Sep 12, 2010

I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?

View 1 Replies View Related

Hardware :: Bluetooth On Fedora 13 / Cannot Get The Bluetooth Service To Start?

Aug 7, 2010

I just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.

View 14 Replies View Related

Ubuntu :: Parse Mac Address From Arp -a

Jan 24, 2011

I'm using arp -a to get the mac address of the router I am connected to. This is the first line of the output:

? ( at 0:50:3e:97:dc:a on en1 ifscope [ethernet]

I want to grab the mac address from this. I know that I probably need to use sed with a regular expression like [0-9A-F]+: but I am not sure how to do this.

View 1 Replies View Related

Ubuntu Servers :: Apache2 - Cannot Parse PHP Files

May 5, 2010

I have apache2 installed along with php5 and mysql5.0. I have installed them by themselves along with just installing the full LAMP install through terminal. My problem is that I cannot parse php files, it will just download them instead. I did change my apache server to nick/projects (nick is my username). If I navigate to localhost/index.html it works fine but will not parse the php files I have put there. I also have rails working fine in that folder too using apache2.

View 7 Replies View Related

Ubuntu :: Failed To Parse Existing X Config File?

Apr 5, 2010

When I try to save my X configuration file.. it says "Failed to parse existing X config file '/etc/X11/xorg.conf'!"

I've already deleted my current xorg.conf and created a new one using sudo nvidia-xconfig and run NVIDIA X server settings using gksudo nvidia-settings but still can't save..I am using 32-bit Ubuntu 9.10 and my video card is NVIDIA FX 5500..

View 9 Replies View Related

Ubuntu :: Lucid Update - Parse Error In File

May 22, 2010

I successfully installed ubuntu but I cant install its updates, heres the prob:
dpkg: parse error, in file '/var/lib/dpkg/available' near line 19410 package 'initscripts': missing version

View 2 Replies View Related

Ubuntu Installation :: Dpkg --configure -a Gives Parse Error?

Sep 3, 2010

I killed a stalled apt-get safe-upgrade, which left lock-files on my system. I followed this guide to clean it up:


and have done the following:

sudo rm /var/lib/dpkg/lock
sudo rm -r /tmp/*
now, when I try:
sudo dpkg --configure -a

i get: dpkg: parse error, in file '/var/lib/dpkg/updates/0006' near line 0: newline in field name `#padding'

the file var/lib/dpkg/updates/0006 contains nothing but lines of '#padding'

System: Freshly installed 10.04 64bit, 2.6.32-21-generic

View 2 Replies View Related

Ubuntu :: Parse Line With Colon Field Separation?

Jan 16, 2011


JAMES ::: AAAA ::: 1111
JANET ::: BBBB ::: 2222
LAURA ::: CCCC ::: 3333


Is there a way to do this from command line?

View 7 Replies View Related

Ubuntu :: Using ISP's That Block Incoming Connections?

Apr 4, 2010

I need some suggestions on software. I would like to offer remote desktop support to some of our clients, but some of them are using ISP's that block incoming connections so, VNC is out of the question. I was wondering if there is something similar to logmein for ubuntu?

View 1 Replies View Related

Ubuntu Security :: Block Incoming URL In 8.10?

Jun 17, 2010

I'm trying to block an incoming URL. My ISP is hijacking 404 pages and annoyingly changing the URL line in the browser and flashing all sorts of popup ads. I just need it for incoming URLs which my router doesn't seem to handle. I'd prefer something packaged with Ubuntu 8.04, but anything simple will do. I know in KDE I could edit the kdeglobals file with:

[KDE URL Restrictions]

View 4 Replies View Related

Ubuntu :: No Incoming Packets With Ekiga?

Nov 2, 2010

I am using a NanoStation 2 in Router mode.The NS is connected wirelessly to my neighbor's router and a switch is connect via ethernet to the NS for LAN use.

The past few days I'm trying to use a VoIP client software to connect to my VoIP account.I use Ekiga Softphone to do so, which requires UDP ports 3478-3479 and 5000-5100 to be open.

So I have opened these ports both on my neighbor's router and on the NS.The problem that I'm encountering is that although I manage to register to the VoIP service, when I answer an incoming call the caller is able to hear me, but I'm not able to hear the caller.So I used wireshark and figured that there is no incoming traffic on my end.

I have used many linux VoIP clients with PCs connecting straight forward to an ADSL router and worked perfectly.

View 1 Replies View Related

Ubuntu :: Mail Not Incoming From External?

Mar 4, 2011

I am setting up a server that is to serve websites and host mail.I have run into a problem regarding the mail server. The server is completely set up but for some reason it is not receiving the e-mails I am trying to send to it. When i mail to the associated mail address from internal by the "mail" command it works fine. But when I try from an external mail server, the mail never gets through. And I do not receive a bounce e-mail.

It says that the port 25 IS open for TCP connections (in iptables - I opened it myself). And surely when I telnet to it on that port from inside the server, I get an connection. But when I telnet from an external network I get a refused connection. It would sound that the port is in fact not really open for external use, in my mind, but it is. Is there possibly anything else I might have neglected to check in this mystery

View 1 Replies View Related

OpenSUSE :: Parse A Broken Repo?

Mar 24, 2011

This is a clean OpenSUSE 11.4 installation (the installation went flawless) I got the error while adding an https repo from the build service (though I *think* I mistyped the URL - plus the build service URL should be http) After restarting yast, everything went fine

I bet there's a segfault happening when trying to parse a broken repo (ie: broken download or even just a 404).

YaST got signal 11 at YCP file packager/repositories_include.ycp:188
/sbin/yast2: line 423: 2780 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS

View 5 Replies View Related

Programming :: Best Command To Use To Parse Strings?

Mar 24, 2010

what is the best command to use to parse strings?I have a variable $str and need to parse this string.Can you provide an example of the command used to get a substring of $str based on the index values of start and end

View 3 Replies View Related

General :: Perl Script To Parse Url From Xml URL?

Jan 20, 2011

I'm trying to simply pull a line (semi-static entry) from an xml file online with a shell script, or perl script. Basically, I've got a URL that loads an XML file. From this file I want to pull a text entry:

<blah xml code blah 'http://static.address.com/static_directory/dynamic_filename.123' blah xml code blah>

I would like to do this from a shell or perl script. I would like to parse the xml file so that it just pulls the http - .123 information and ends there, that's the only information I need. it will then run a local command on this file.

View 1 Replies View Related

Programming :: Awk Parse String With Space?

Feb 4, 2010

How to let awk consider a string by double quota as one field? for example:

echo "first "second is a string"" | awk '{ print $2 }'

I want to print out "second is a string".

View 8 Replies View Related

Programming :: Parse Error In Php Code?

Jan 20, 2011

I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"

if(isset($_POST['email'])) {


View 3 Replies View Related

Programming :: Parse XML To Get IP Adresses Only Using Bash

Jul 28, 2010

I got this xml

<other stuff="etc">...</other>
<cluster id="1">
<host ipaddress="" name="server1">
<host ipaddress="" name="server2">
<host ipaddress="" name="server3">

how would i get the ip addresses only using bash.

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved