Ubuntu :: After 10.04 Upgrade - Blank Screen When Logging Out Of KDE?

Jan 25, 2011

Just upgraded to 10.04. All is well save one little problem. I use both Gnome and KDE. When using KDE, instead of going back to the login screen when logging out, I get a hanging, blank screen. At the top it says,(starting MySQL database server MySQLD.) I have to shut down PC and reboot. Gnome part works fine.

View 9 Replies


ADVERTISEMENT

General :: Not Starting - After Logging Only A Cursur Blinks On A Blank Screen

Mar 19, 2010

I had xp sp3 installed on my system celeron 2.0 ghz.and two hard disks.I had installed succesfully ubuntu on other disk. after restart I can see dual boot menu. one xp professionl and other ubuntu. I clicked on the ubuntu but after logging only a cursur blinks on a blank screen. I can see the choice menu "normal","verbose" etc but when I started in normal mode, a blank screen appears and a cursor blinks.

View 13 Replies View Related

General :: After Booting Logging Into The User A/c - Gives A Blank Screen With The Desktop Wallpaper

Jan 8, 2011

I just put on my Linux PC now and after booting logging into the user a/c, it just gives a blank screen with the desktop wallpaper - no menu's or anything, so there's pretty much nothing I can do. I know I had removed the menu and replaced it with the dock (awn dock or something).

However, I can log in as root and root works fine (so I'm doing the update at the moment).

Coming back to my question, I used to know an Ubuntu command which I put in as sudo (terminal)and it used to work like a magic command which would literally restore and repair my linux installation - I even used it when I bought a new system and transferred my linux hard drive from my previous machine to the new one and this one command actually setup and prepared my linux installation to work smoothly in my new PC - just one command after connecting my h/drive in the new PC.

View 4 Replies View Related

Ubuntu :: Blank Screen On Upgrade To 10.10?

Oct 23, 2010

I have an HP 2730pAfter upgrade i have a blank screen. i don't get a splash screen and i can't alt+ctrl+F6 to get extra terminal.Unfortunately i can't ssh into the box either since i don't have openssh-server installed.Is there anything i can do short of taking the harddrive out and putting it into another box?

View 2 Replies View Related

Ubuntu :: Upgrade From 9.04 To 9.10 - Boot Up (Blank Screen)

Apr 7, 2010

Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.

View 9 Replies View Related

Ubuntu Installation :: Blank Screen After Upgrade 10.10->11.04

May 1, 2011

I have a Toshiba Satellite P105. Did the upgrade. Everything went smooth until the reboot. After that the deep black. I am suspecting Nvidia driver. "F" key maneuver brings a flash of the booting process. That is quickly followed by a mosaic screen and a numb computer.

Other than nuking the system and re-installing 10.10 any constructive idea?

View 3 Replies View Related

Ubuntu / Apple :: Karmic On 5.4 Blank Screen After Upgrade

Mar 23, 2010

im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.

View 5 Replies View Related

Ubuntu Installation :: Upgrade To 10.04 - Getting Blank Screen Now / Sort It?

Sep 4, 2010

I did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.

View 6 Replies View Related

Ubuntu :: Foobar2000 Giving A Blank Screen After Upgrade?

Dec 22, 2010

Ubuntu 10.10 32 Bit
Wine 1.3.9

Alright so this happens to me after every time wine updates from the wine PPA. Foobar2000 works fine till Wine updates, after it updates it pops up a full sized window and instead of it looking like it should it.... looks like whatever was on the screen when the window opens. It's non functional. I tried using the portable version of wine this time and the same thing happens after a update. This is... sad for me because I use it for transcoding.

Bellow is what was spat at me when I ran it thru a terminal.

Quote:

grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe -opengl
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub
grammatrain@tprb:~$ wine /home/grammatrain/Desktop/foobar2000/foobar2000.exe
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:win:RegisterShellHookWindow (0x10066): stub

View 3 Replies View Related

Ubuntu Installation :: Blank Screen After Upgrade Restart

Jan 22, 2011

I had a working ubuntu 8.04.x system. I ran the update manager to upgrade to 10.04.1 LTS. Everything seemed to run fine up to the point where it needed a restart. Upon restart, it spews out a stream of log messages, changes the font of the log messages already displayed, and then the screen goes blank and the system does not respond to keyboard or mouse. It appears as if the system is trying to set up the monitor and messes up.

If I ESC into grub after BIOS boot, I have the option of booting two different kernels: 2.6.32-27-generic and 2.6.24-28-generic. The original ubuntu 8.04 kernel was 2.6.24-24-generic(though I did do some updates might that be the 24-28 kernel?).

Booting the 32-27 kernel results in the behavior described above.

Booting the 24-28 kernel produces a stream of log messages that scroll past to fast to read and drops into ash. One of the last messages is: !ALERT /dev/disk/by-uuid/ xxxxxx does not exist -which is true because there is very little in the /dev directory.

View 4 Replies View Related

OpenSUSE Install :: Blank Screen After 11.3->11.4 Upgrade?

Apr 3, 2011

I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.

Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!

[Code]...

View 8 Replies View Related

Red Hat / Fedora :: Upgrade Seems Okay - Blank Screen After Reboot

Feb 11, 2011

I tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?

View 1 Replies View Related

Ubuntu Installation :: Blank Screen After Login After Upgrade To 10.04 Beta?

Mar 28, 2010

I just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change

Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f

View 9 Replies View Related

Ubuntu :: Blank Screen After A Sudo Apt-get Dist-upgrade / Sort It?

Jan 18, 2011

The only thing I remember being updated is xserver, but I know there were other packages updated.

After the splash screen, a text login is shown. If I do nothing, it goes right to a black screen, but first there are weird red pixels randomly strewn about the screen. If I quickly login via the text screen, it then goes to the same black screen. Either way, there are the weird red pixels and a few flashes of the screen before going black.

This happens 100% of the time.

I have tried:
booting with recovery mode and selecting repair packages (no packages are broken, missing, etc.)
booting with recovery mode and selecting startx with failsafe (same black screen)
booting with older kernels (same thing)

View 5 Replies View Related

Ubuntu Installation :: Blank Screen / Errors Trying To Upgrade ATI Catalyst Drivers

Jan 29, 2010

So xorg was acting up, and I went into the Hardware Drivers menu to see if the driver had a problem. The driver was disabled, and could not be activated. I downloaded the new ATI driver. I uninstalled the old one, installed the new one, and ran the config step just like it specifies in the install instructions. Upon reboot, I got a blank screen instead of the login screen.I managed to drop back to the command line and uninstall the driver, so now I'm stuck in ubuntu with one monitor instead of 2.

I'm going to attempt to revert to the old ATI driver (which I still have in my home dir), but I wanted to be sure to get this into the forums before I ruined my GUI again.

View 2 Replies View Related

Ubuntu Installation :: 10.4 - Greeted With A Blank Screen With 6 Blinking Dots After Upgrade

Mar 21, 2010

Neomagic 256ZX(I think) video card, 256 MB RAM Well, after the upgrade went fine, I rebooted and was greeted by a purple 10.4 screen, after which I was greeted with a blank screen with 6 blinking dots. I don't know if this is a new video driver failure (its a pretty old laptop, theres no need for new drivers) or if its a grub problem. Since I can't get to a grub it goes BIOS>Purple 10.4>nothing and I don't get a terminal login, the laptop is now considered bricked. However I was okay with the install and was wondering if theres a way to fix it.

View 1 Replies View Related

Ubuntu Installation :: Blank Screen: 10.04, ATI Radeon 9550 / X Tries To Load Screen Just Goes Blank?

May 9, 2010

I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.

View 3 Replies View Related

OpenSUSE Install :: Blank Screen After Upgrade From 11.2 To 11.3 (NVIDIA FX3800)

Jul 16, 2010

I have just performed an upgrade from OpenSUSE 11.2 to 11.3. My Machine is a Lenovo W701DS laptop which uses an NVIDIA FX3800M graphics card. The system was working fine under 11.2 before the upgrade.

After upgrading to 11.3 the splash screen after GRUB comes up for about 1 second before the screen goes blank. After about 5 mins I am able to SSH to the Laptop and access the system. Doing this I created an xorg file using "X -configure" and copied the new file to the /etc/X11 directory and renamed to xorg.conf.

If I SSH to the laptop change run levels to init 3 then init 5 the Gnome comes up and I have graphics the system works However I am unable to access the text consoles using alt+f1, f2 etc. If I restart the system it is back to the blank screen.

I have attempted to install the NVIDIA drivers however the installation fails due to an error with gcc or kernel source versions. Error log reports that the kernel was complied using a different version of gcc.

View 3 Replies View Related

OpenSUSE Install :: Getting Blank/black Screen After Performing Upgrade From 11.2

Sep 8, 2010

During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!

HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.

View 9 Replies View Related

Ubuntu Installation :: Sticky: Graphics Resolution - Upgrade / Blank Screen After Reboot

Jun 11, 2011

I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:

Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:

1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".

The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.

View 1 Replies View Related

Fedora Installation :: Upgrade To 12 From 11 - Screen Goes Blank With Alot Of Disk Activity

Dec 15, 2009

I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.

View 1 Replies View Related

Fedora Installation :: Upgrade To FC13 - Initial Boot Failed - Just Blank Screen

Sep 19, 2010

I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.

I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.

At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.

The update process has also removed my previous kernels, so I can't test a different kernel

View 5 Replies View Related

Ubuntu :: Screen Keeps Going Blank/flashing Blank?

May 17, 2010

When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.

Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM

[Code].....

View 9 Replies View Related

Ubuntu Installation :: 10.10 Image Not Loading - Flash Screen On Blank Screen

Dec 26, 2010

Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.

View 9 Replies View Related

Ubuntu :: (Grub - Windows 7 - Unknown Filesystem) - Screen Goes Blank And Screen On-button Begins To Blink

Jan 26, 2011

The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"

I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.

View 4 Replies View Related

Ubuntu :: Xubuntu Black Screen / Blank Screen Using Live CD?

Oct 9, 2010

I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.

FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt

View 1 Replies View Related

Ubuntu :: Blank Screen On Boot / Very Fast Plymouth Screen

Jan 14, 2011

I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.

View 4 Replies View Related

Ubuntu :: Screen Goes Blank Or Boots To Tty1 After Loading Screen?

Apr 15, 2011

like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:

* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2

Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Random Logging Off Since Lucid Upgrade

May 18, 2010

Just upgraded from Karmic to Lucid using auto upgrade on Thinkpad T42. Since doing this, I am experiencing random logging off. Suddenly, I get dumped to the log in screen and need to log back in. A search in the forum suggests this was a problem that some people had with Karmic, but is now fixed (I never experienced it with Karmic)

It seems to be associated with Firefox, with it not happened since switching to Chrome, but switching back to Firefox has just resulted in me being logged off. This could be a coincidence of course. This is rather serious problem as I use the Thinkpad to give presentations

View 4 Replies View Related

Ubuntu Installation :: Get The 10.10 Splash Screen For A Second Then A Blank Screen?

Dec 22, 2010

I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.

I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved