Ubuntu :: 11.04 Failed To Load Gnome3

May 21, 2011

i installed ubuntu 11.04 on my presario cq40-115au but it does not load the default gui (unity). i only see a blue background and an icon of my other partition on desktop. even alt+F2 does not pop the "run application" windows. anyone had the same issue? especially with radeon hd3200?

View 6 Replies


Fedora Installation :: Gnome3 In 15 Failed To Load And Started In The Fall Back Mode?

May 25, 2011

I am installing fedora 15 in vmware 7.1.4.It tells me "Gnome3 failed to load and started in the fall back mode" when accessed in live-cd.Ever since fedora 15 beta or any other distros take gnome3 as default destop,I haven't experienced a beautiful normal gnome3

View 14 Replies View Related

Ubuntu :: 64x Natty Install Using Gnome3 Ppa ( Official Ppa From Gnome3)?

May 5, 2011

I am trying to solve multiple issues with my 64x natty install using gnome3 ppa( official ppa from gnome3). I have this setup on two machines, one is a fresh install the other is a upgrade. They both have most of these issues. Here they are: 1) Nautilus will not launch from the favorites bar. It does launch from a shortcut on the desktop. It will not run from the terminal unless I am root. 2) Number lock is disabled at startup (enabled in my bios). I used to be able to enable after nattty had started, I no longer can, though num lock light is lit - number keypad does not work!

3) I have set gnome3 set to let nautilus draw the background and desktop, I get a white screen at boot until Nautilus is launched then I get a background and some desktop icons(no computer or network icons). If I plug in a usb drive the icon appears on my desktop, when I select it I loose the background and have to select it again.

4) Wireless randomly will drop the connection, have to reconnect, sometimes it will, sometimes I have to reboot. I have Fedora installed on a 2nd hard drive on the machine with a clean install and the only similarity is it displays the default desktop until I launch Nautilus, then my background and desktop are displayed with all of the icons. From there on out Fedora has none of these issues. I have used Ubuntu Gnome and XFCE as my only os since 6.0 and have never had this many problems. Both machines would not run the gdm because of Nvidia issues after the upgrade and clean install. I DO NOT want to give up on Ubuntu as I tell all my friends and family to use it.

View 2 Replies View Related

OpenSUSE Hardware :: The Exact Error Message Is: "Failed To Extract ZIP Archive" Or "Failed To Load File"?

Apr 13, 2011

I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---

System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---


OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".

View 7 Replies View Related

OpenSUSE Hardware :: NVidia GeForce2 GTS / Pro Driver - Failed To Load Module "nvidia" (loader Failed, 7)

Feb 17, 2010

I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"


View 9 Replies View Related

Ubuntu :: GRUB Won't Load After Failed Upgrade?

Mar 6, 2011

When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.

So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.

View 9 Replies View Related

Ubuntu :: Xsession-errors - Failed To Load .compiz

May 5, 2010

I have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.

Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:

WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.


View 3 Replies View Related

Ubuntu :: Failed To Load NVIDIA Kernel Module?

May 11, 2010

My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:

(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration

I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).

Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.

I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.

Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.

Here's my xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"


View 9 Replies View Related

Ubuntu :: 10.04 - Failed To Load NVidia Kernel Module

Aug 8, 2010

My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got

Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'

Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.

View 1 Replies View Related

Ubuntu :: 10.10 - Failed To Load NVidia Kernel Module

Feb 4, 2011

I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.

(EE) NVIDIA: failed to load the NVIDIA Kernel module.
please check your
(EE) NVIDIA: system's kernal log for additional error messages.
(EE) failed to load module "nvidia" (module-specific error, 0)
(EE) no drivers available
She is running ubuntu 10.10

View 5 Replies View Related

CentOS 5 :: Kdump FAILED To Load?

Dec 19, 2009

When my server starts I received this text:No kdump kernel image found:[WARNING]Tried to locate /boot/vmlinuz-2.6.18-164.6.1.el5.centos.plusLoading kdump:[FAILED]

View 4 Replies View Related

Ubuntu Installation :: 9.10 Server - Load Installer Components From CD Failed

Mar 6, 2010

I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.

View 5 Replies View Related

Ubuntu :: Can't Boot 9.10 With Apparmor Profiles Failed To Load Error

Mar 7, 2010

Ubuntu 9.10 stops booting with apparmor profiles failed to load error message in recovery mode.In the usual mode it hangs at the logo stage.I tried all the kernels listed but the boot process hangs every time.I searched for a solution but could not find it. Windows 7 boots fine.I haven't installed grub to the MBR.I had to reinstall the windows bootloader but I am not sure if it's related to the problem.I would like not to reinstall the os.

View 7 Replies View Related

Ubuntu Multimedia :: Safe Graphics Mode Failed To Load

Aug 5, 2010

I made a backup of xorg.conf and added Xinerama and the other configuration items I needed. X failed to load. Then I copied my backup to xorg.conf and...X failed to load. Then I tried booting up in safe graphics made, and X failed to load. I tried dpkg-reconfigure xserver-xorg, but it did nothing. Literally nothing -- no error, no output, no nothing. Then I saw someone who had suggested to apt-get remove --purge xserver-xorg, then reinstall it, and X failed to load.

I am at a complete loss. I have now read that the dpkg-reconfigure xserver-xorg is no longer used, that the os is supposed to autodetect everything now, but in that case I don't see how I will ever get dual monitors. In any case, I can live without dual monitors, but I need at least ONE monitor, and I have no idea how to get the configuration working.

View 2 Replies View Related

Ubuntu Multimedia :: Module Nvidia Failed To Load With Kernel 2.6.32-33

Jun 7, 2011

I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?

View 3 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

Debian Multimedia :: Failed To Load X Using Xinit

Oct 9, 2015

After regular upgrade (I am using Unstable) I boot my system today but failed to load X using xinit (which I always use). Using startx X loads but leaves it unusable, both mouse and keyboard don't work (I never use startx really as regular user but in root). The message is:

Code: Select allxf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

In my /etc/X11/Xwrapper.config I changed "allowed_users=console" to "allowed_users=anybody" and that doesn't work.

View 2 Replies View Related

Debian Hardware :: Gnome 3 Failed To Load?

Aug 21, 2014

I've just bought this laptop Asus G750JZ with Intel Haswell i72.4 GHz and Nividia GTX 880. I have this problem with Debian: after i install the OS it says that Gnome 3 could not be loaded. I guess it doesnt recognize my video cards(Intel HD 4600 and NVidia 880). How to make Debian running in optimal condition on my laptop.

View 5 Replies View Related

Debian Programming :: Failed To Load Module

May 30, 2015

I was playing around with QT5 today and I am getting the error Gtk-Message: Failed to load module "canberra-gtk-module". Searching suggested that the module may not be installed however it looks like it is to me.

Code: Select allii  libcanberra-gtk3-0:amd64              0.30-2.1                            amd64        GTK+ 3.0 helper for playing widget event sounds with libcanberra
ii  libcanberra-gtk3-module:amd64         0.30-2.1                            amd64        translates GTK3 widgets signals to event sounds
ii  libcanberra-pulse:amd64               0.30-2.1                            amd64        PulseAudio backend for libcanberra
ii  libcanberra0:amd64                    0.30-2.1                            amd64        simple abstract interface for playing event sounds


View 3 Replies View Related

Fedora :: Gnome 3 Failed To Load In VisualBox

May 27, 2011

As someone says,I install fedora 15 in VisualBox,and before installing I choose "Enable 3D acceleration",but when entering the desktop,I just see "Gnome 3 failed to load".Earlier of today,I try this in VMware Workstation,there is the same question. Why this happens?Is that means I will miss the Gnome 3 in VisualBox and VMware Workstation.....for God's seek...

View 8 Replies View Related

OpenSUSE :: Failed To Load Slide: Freedesktop?

Mar 5, 2010

i am trying to run compiz it runs but i get this error

compiz (cube) - Warn: Failed to load slide: freedesktop

and then most of the plugins dont work . kwin uses alot of cpu resources so i am using compiz

View 9 Replies View Related

CentOS 5 :: Failed To Load IPMI Drivers

Jul 13, 2011

I have a problem loading ipmi drivers. The program responsible for the loading fails on a first one (ipmi_ msghandler.ko) and quits

View 1 Replies View Related

Ubuntu Security :: AppArmor Failed To Load - Could Not Allocate Temporary File

Jan 7, 2010

I get the error message in the subject line, followed by a red failed message.

However, once the system is finished booting, I can log in and

sudo /etc/init.d/apparmor start
and it starts normally.

View 7 Replies View Related

Ubuntu Multimedia :: Failed To Load Nvidia Kernel Module In Lucid

Oct 15, 2010

I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:

WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.


When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.

View 1 Replies View Related

Ubuntu :: Can't Boot - Grub Rescue Prompt And No Ability To Load Into Either Old 10.10 Or New Failed 11.04

Apr 17, 2011

I have a laptop with Windows 7, and about a week ago I installed Ubuntu 10.10 64-bit via LiLi USB creator. Worked beautifully, but I was having some issues with the brightness controls so I decided to get cute and upgrade to 11.04. So I downloaded the beta2 and used LiLi to make the USB (unsupported for that version of course) which used the same parameters as 10.10. I then tried to do a fresh install over the partition I had set aside for Ubuntu and had 10.10 installed on (~80 GB).

So in the installation itself, something got majorly screwed, and the entire system froze. Next thing I knew, I was rebooting and got the Grub Rescue prompt and no ability to load into either my old Ubuntu 10.10 or my new failed 11.04, or of course my Windows 7 partition either. The partition is obviously there, and as I only have one PC in my house, with no Windows 7 recovery discs, I currently cannot fix the mbr to just get my Windows back. I can of course get this in a couple days, but I'd like to be able to fix this without going to my parents.


Those are my partitions. /dev/sda3 is my Windows Partition, which I want to boot from. Only problem is, I'm not really sure where the computer is looking to find the boot record. I think it's from my fubarred /dev/sda4 partition which means it's basically looking nowhere. So I can't modify it to point to my Windows so I can just get back there.

View 7 Replies View Related

Ubuntu :: Can't Login - Failed To Load Module 'dri' No Space Left On Device?

Jul 3, 2011

I'm unable to login to my Kubuntu Lucid. The login screen takes my password, blanks, then returns me to the login screen. I'm getting some graphics errors when running from recovery mode as well as the no space left on device error when attempting to start x from the terminal. Here are some outputs: When starting from recovery mode, selecting failsafeX from the Recovery Menu:


I've come to the conclusion that my root partition is full, but I'm not sure how to clear space, or how much to clear once I work out how to do it. I removed a few packages with apt, but it doesn't seem to have any effect. df -h shows that root is 100% full, yet it has 3GB free. I've grown comfortable with Ubuntu in the couple years I've been using it, yet this level of problem-solving is a bit nerve-wracking to me. I've been considering reinstalling (this machine is running Lucid upgraded from Karmic and Jaunty and has a few oddities), but I hate the idea of being forced to reinstall because I can't overcome this problem. If you need any other information or outputs from terminal commands, I'm happy to provide it.

View 7 Replies View Related

Ubuntu Multimedia :: Install TVT3 Dual TV Tuner - Failed To Load?

Sep 1, 2011

I've Googled myself silly and I cannot find a dang thing on how to install. I've got a Dell Dimension 4700 with the Emuzed TVT3 Dual TV Tuner, and I've dual booted with Mythbuntu for use with MythTV. Though I have been unable to find any way to install the capture card. I have gone into the settings (and even after reading the wiki), I'm not 100% sure what to select. Not to mention, where it says probed, it shows failed to load.

View 4 Replies View Related

Fedora :: Disable GNOME 3 Failed To Load Dialog

Jul 5, 2011

I have built my own custom Fedora 15 spin, the problem is that every time it show me GNOME 3 Failed to Load message dialog with the following message: "Unfortunately GNOME 3 failed to start properly and started in the fallback mode ....." Is there anyway to disable this dialoag?

View 1 Replies View Related

OpenSUSE Install :: Gnome 3 Failed To Load - Error

Apr 12, 2011

I just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.

View 5 Replies View Related

General :: Unable Load Apache - Failed Dependencies

Nov 19, 2010

rpm -ivh httpd-2.0.59-1.i386.rpm warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 error: Failed dependencies:

libapr-0.so.0 is needed by httpd-2.0.59-1.i386
libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386
libcrypto.so.4 is needed by httpd-2.0.59-1.i386
liblber-2.2.so.7 is needed by httpd-2.0.59-1.i386
libldap-2.2.so.7 is needed by httpd-2.0.59-1.i386
libssl.so.4 is needed by httpd-2.0.59-1.i386

[root@ganesh apache]# warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 -bash: warning:: command not found

View 7 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved