Ubuntu :: 10.10 Booting Stopped - Getting Error Message

Mar 2, 2011

I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line. I think I accidentally uninstalled some packages clicking at completely removal at some ipod utilities in synaptic.

View 3 Replies


Fedora X86/64bit :: Error Before Booting \ Error Message:IOMMU: Mapping Reserved Region Failed?

Feb 20, 2010

I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating

View 2 Replies View Related

Debian :: Transmission 1.22 Stopped Downloading \ Get An Error Message Tracker Responded: Unknown Error (0) In The Info Window, Tracker Tab?

Nov 14, 2010

I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?

View 2 Replies View Related

OpenSUSE Install :: Error Message On Booting?

Dec 7, 2010

Running 11.3 64 bit updated to kde 4.5.4I noticed when booting yesterday the following error message is shown:-

[ 17.688956] end_request: I/O error, dev sr1, sector 4294180608
[ 17.696944] end_request: I/O error, dev sr1, sector 4294180608
[ 17.702846] end_request: I/O error, dev sr1, sector 4294180784


View 3 Replies View Related

General :: Compiling Own Kernel - Error Message On Booting

Aug 7, 2010

These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35

View 7 Replies View Related

Ubuntu :: Get An Error Message "script Stopped Running"?

Nov 5, 2010

Not sure if I need anything but when a pogo game starts to load, it stops and I get an error message "script stopped running" Haven't been able to use pogo.

View 2 Replies View Related

Ubuntu :: 11.04 Stopped Booting Up?

Jun 19, 2011

Ubuntu 11.04 was running smoothly alongside W7 on Dell XPS M1330. However, when I choose Ubuntu from Grab screen, I have a blue screen with a flashing cursor, key board becomes irresponsive. (Tried to reboot a few times = no difference...

View 2 Replies View Related

Ubuntu :: Evolution Message Indicator Stopped Working?

May 16, 2010

Not sure exactly when this happened.I noticed (and posted here) several days ago that notification SOUNDS had stopped working but now the indicator isn't working at all with evolution.I get pop-up OSD notification things saying I have a new message but the indicator doesn't change to green and there is no entry for new messages or message counter in the menu, though the arrow is there to indicate evolution is running.

View 4 Replies View Related

Ubuntu :: 10.04 Configuration Has Stopped Booting

Sep 7, 2010

My 10.04 64-bit installation has stopped booting, it gets stuck at the splash screen animation.Photo of screen at error, after trying/selecting recovery mode:Last thing I remember is doing is trying to find a method for automatically mounting NTFS drives (to try co-exist with the windows install).I use an Intel DX58SO motherboard, and a Radeon HD 4870 graphics card.

View 9 Replies View Related

Ubuntu :: Error Message: Unable To Retrieve Message

Dec 31, 2010

Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message

Running the following;

evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS

View 4 Replies View Related

Fedora Security :: Send An Email Using Evolution The Message Was Not Sent But Returns A Error Message?

Apr 30, 2009

Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.

View 1 Replies View Related

OpenSUSE :: Click On Install Get The Following Error>>Message Did Not Receive A Reply (timeout By Message Bus)?

Nov 10, 2010

Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)

View 5 Replies View Related

Ubuntu :: 10.04 Stopped Booting - No Init Found

Mar 6, 2011

I installed 10.04 on daughter's laptop. It's been working perfectly but suddenly it's refusing to boot. Sadly, she's now half way around the world so I can't fiddle around to get it working. She's posted me a photo of the screen.

Here's what seems to be the important part:
mount: mounting /dev on /root/dev failed: no such file or directory
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /proc on /root/proc failed: no such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= bootarg.

View 1 Replies View Related

Ubuntu :: Computer Completely Stopped Booting?

Jul 8, 2011

So, first of all, this is my sisters computer so I am not sure exactly what happened. I had installed ubuntu alongside WinXp a couple of weeks ago. Today she booted into xp for the first time and accidentally launched some system restore option. A dialog box appeared and told that if she continued, everything on her disk would be erased. apparently, there was no indication of how to not to continue, so she shut it down by holding the power button.

Now, it won't boot. Not even to grub, it just cycles where the screen comes on, a courser blinks in the top left, and then it automatically restarts after about 5 seconds and repeats (unless one launches BIOS configuration). I assume something about the MBR has gotten messed up. I tried booting off a USB thumb drive, but it just accessed the drive for a second or two, and then went back into the cycle (I tried every USB socket, and the BIOS was configured properly to boot off external USB, also, I was able to boot my computer from the USB)

how to proceed if I can't even boot off of USB. Oh, the computer is Asus Eee pc netbook (no CD drive).

View 4 Replies View Related

Ubuntu Installation :: Windows Vista Stopped Booting

Mar 3, 2010

My windows vista stopped booting so I had re-install vista. Now that I have done that Vista automatically boots every time I turn on my computer. I can still see that the Linux partition is there but I do not know how to boot it.

View 2 Replies View Related

Ubuntu :: Grub2 Stopped Booting Windows - Can't Get It Fixed?

May 20, 2010

I'm dual-booting Ubuntu 10.4 (grub2) and Windows 7 (x64). Something stomped on my grub install on the windows boot sector (probably windows). I was getting errors like "Cannot find disk.." I updated my grub.cfg to what I thought should work and now I'm getting errors like "cannot find C/H/S values".

I've attached the RESULTS.txt. Its really a simple install, although I do have a RAID5 array; the RAID disks are just for data and hold no OS files. Both OS's are on /dev/sdd.

View 9 Replies View Related

Ubuntu :: Display A Pop-up Message After Booting?

Dec 21, 2010

booting up the PC (Before or After user login) display an "Acceptable Usage agreement" with a OK button. The User must press OK to proceed. The Acceptable Usage agreement shows our companies System network policy. It can be easily done in a windows PC (Look Here). But I don't know how it is configure in ubuntu .

View 2 Replies View Related

Ubuntu Installation :: Booting Windows XP (with Wubi) - Stopped Working

Oct 5, 2010

I had Ubuntu installed in Windows XP (with Wubi). One day my motherboard, let's just say stopped working. So, I had to replace my motherboard..., well I bought a new PC, but with the Hard Drive of the old one. When I first started it i got the same boot screen letting me choose between Ubuntu and Windows XP. Well, you can pretty much figure out that none of them worked. So, I installed Windows 7 (as the new configuration is pretty powerful). So, from the boot menu Windows XP was replaced by Windows 7 but still Ubuntu stays there and I can't figure out how to delete it.

View 2 Replies View Related

Ubuntu :: VirtualBox Stopped Working (Starts Booting Then Closes)

Oct 12, 2010

I'm running VirtualBox in Ubuntu 10.10. Been using VirtualBox for ages. It stopped working a few weeks ago but I'm baffled. Windows XP begins to load and you see the animated progress bar then it powers down. There are no errors and it's not creating any log files.

View 2 Replies View Related

Ubuntu :: Booting After Installation (Dual Booting With Vista) - Error: No Such Devide Found

Jun 24, 2010

i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.

Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.

When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]

View 9 Replies View Related

Fedora X86/64bit :: F11 Webserver Has Stopped Booting?

Jun 5, 2010

Last night I couldn't access my webserver, so I ran downstairs and turned on the monitor, only to find a "GRUB" prompt on the screen. I don't really know much about grub, but it didn't seem to accept any input anyway, so I rebooted, and after the server went through all its hardware checks, the "GRUB" prompt reappeared, still unresponsive to any input.

Next I booted with the F11 DVD and selected "Rescue Mode" from the menu. That looked hopeful. I was able to mount my filesystem, but I have no idea what I'm looking for or how to fix it. The manual hasn't been too helpful, and I haven't found any "how to guides" that address this kind of thing.

How does a solid reliable system like this just stop working? How can I get it back on its feet, and is there anything I can do to prevent whatever happened from happening again? Am I doing anything wrong?

This server has been running nonstop and trouble-free for about four years now. I upgraded from F10 to F11 without incident. I'm running Apache httpd, Tomcat (through httpd via ajp13), and sshd (only accessible from the local network). I update everything with yum on a weekly basis. The server is on a private network with port 80 NATted through the cable modem and a wireless router. The wireless network is secured with WPA2 Personal.

I was just about to upgrade to F13 before this happened, and I'm now wondering if I should do a clean install and start over, or if installing F13 as an upgrade will fix whatever is wrong with the system. I've always felt you had to get everything in working order before you even think of upgrading, but I don't know if that applies to Linux. Will I just end up with a F13 system that won't boot?

View 6 Replies View Related

Fedora :: F14 On Laptop Mysteriously Stopped Booting?

Feb 1, 2011

Fedora 14 on my laptop has randomly decided that it hates me. The system stops booting after "starting atd", right when its starting X. It "hangs" after the fedora logo, though it will reboot when I try "ctrl-alt-delete". I can see that haldaemon is failing to start, and when I boot the kernel with "selinux=0" it gives me an error message:

error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory. NetworkManager fails with same message. the .so file is in its proper directory, where it has been all along. I've tried booting into runlevels 2 and 3. No luck there either. It'll boot to the login prompt, but as soon as I under my userid the screen flashes. I managed to get the error message it was giving me before the flash: inconsistency detected by ld.so: dl-open.c: 503: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT` failed!

I can boot into single user mode just fine. I've checked dmesg and Xorg logs, but I honestly don't know what I'm looking for (and I imagine that those logs would be useless if I boot into runlevel 1, since the error is at higher runlevels. But I can't get the logs for those because the computer just hangs. SSH and networking are never enabled before the hang.)

I'm at a loss here. I use the machine for both school and work [and I have quite a bit of both to do today] and I've been trying to get it to boot normally for hours now. Anyone have any ideas that I could try?

View 4 Replies View Related

Debian Installation :: Stopped Booting After Hardware Switch

Nov 7, 2010

I found out that my installation was incomplete. So I reinstalled Debian using the businesscard image on a DVD. It worked fine, but I have a hardware constraint on my computer. I have two SATA hard drives and one SATA CD/DVD drive, and only two SATA connections on the motherboard. So, to install Debian I had to remove one hard drive and put the CD/DVD drive. When I saw that Debian was working, I removed the CD/DVD drive, and that's when Debian stopped booting. It said it couldn't find tty and opened BusyBox, giving me a command-line interface, and the line started with (initramfs) before the commands (with the parenthesis).

View 1 Replies View Related

Fedora :: 7/9/2010 Update Stopped System From Booting?

Jul 9, 2010

This morning I did an update on a current F13 system with NVIDIA Graphics card. System gets to a complete white bar across the screen followed by "FEDORA 13" . This all starts blinking and goes no further.

View 7 Replies View Related

OpenSUSE Install :: Windows Stopped Booting Through Grub

Apr 17, 2010

My Laptop Config is as follows.

Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)


I have been carrying out updates of both Vista & SuSE whenever i operate in them.

One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.

My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.

View 9 Replies View Related

Ubuntu :: Booting Stops With Message Saying K8 NPT DATA CHANGE.......

Nov 27, 2010

I currently use mint gnome 9 as my OS but I have am having a problem with the boot up on my computer. It starts booting but then stops with a message saying K8 NPT DATA CHANGE UPDATE NEW DATA to DMI UPDATE SUCCESS and stops there and doesn't go any further. its a BIOS or a CMOS. what this message means and how to fix it?

View 1 Replies View Related

OpenSUSE Install :: System Stopped Booting After Recent Update

May 12, 2011

my system stopped booting after recent update.When I select desktop it goes to splash screen an dies.Have to hit reset key.If I select nomodeset it boots fine excepts graphic resolution is 1280x1024 instead of 1680x1050.System is sandy bridge, Asus P8H67-M EVO, Intel Graphics enabled no other grapics cards, Suse 11.4 64 bit.I do my updates with zypper up.

View 9 Replies View Related

General :: New Install Of Debian Of PPC G4 Not Booting With Repeated Message - Drive Not Ready

Mar 17, 2010

I just installed Debian onto a PowerPC G4 Tower with two hard drives. I left OS X on one of the drives and reformatted and installed Debian on the other, using the installer from the 60Mb ISO from the Debian website.

The installation had no issues and it starts yaboot and Debian no problem.

After about 2 minutes of the booting up process, it starts to output this, every five seconds:

While this happens, other things still continue load and it outputs occasional messages and even gets to "Debian Login:" where if you type really quickly and hit enter, it takes it and prompts for "Password:" right after the next round of the above messages.

I have not been able to completely log in yet.

I can start up into the shell as root with "Linux single" with no problems.

I think this might have something to do with the second Mac OS Formatted Hard drive. I have considered unplugging that drive and testing it that way, but I am looking for a solution to turn off whatever script is running that every five seconds and failing, regardless of what it is trying to do.

View 9 Replies View Related

Ubuntu :: GRUB Loading Error - Laptop Dead - Stuck At Error Message

Feb 21, 2010

I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.

View 8 Replies View Related

Ubuntu :: Wubi Error Windows 7 - Error Message Permission Denied

Oct 23, 2010


Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved