Ubuntu :: 10.04 Won't Recognize 1920x1080 Resolution?

Sep 9, 2010

I have a serious problem: I just installed Ubuntu 10.04 on my computer which has a Hanspree HF257 25-inch monitor with a native resolution of 19201080. I have an NVIDIA GeForce 9400GT graphics card, and before I installed the proprietary NVIDIA drivers, the screen resolution was fine, but after I installed the recommended drivers, the screen resolution went way down after restart!

The monitor is recognized only as a "CRT-1 (CRT-1 on GPU-0)″ under the NVIDIA X-Server settings. The highest resolution I can adjust it to is 1360768. I have no idea what to do, but I'm sure there's a fix for this, right?

View 9 Replies


ADVERTISEMENT

Ubuntu :: Cannot Get 1920x1080 Resolution On Natty?

May 23, 2011

I installed Natty about a month ago. First time i installed, i got this same problem.Installation pendrive works on 1920x1080, and the first time it boot it was lovely.I did all the recommended installs, including ATI / AMD proprietary FGLRX Drivers, and the second time my machine boot, it came on 1600x1200. I did some troubleshooting with xrandr, and was able to get HD resolution again, until i rebooted, and then i couldn't even get it with Xrandr.

This is really driving me nuts. I was able to get it fixed by going into recovery mode, and running ubuntu in low graphics mode, i was choosing reconfigure and it worked sometimes, but now i'm stucked with 1600x1200 and i hate it. I don't want to go back to windows, and i really followed every trhead i found with solutions and can't get it to work.I forgot to mention that i have an Ati Radeon 4670 video card. Also i am a total n00b on linux, i am good at following instructions though

View 9 Replies View Related

Slackware :: 12.2 - 1920x1080 Resolution

Sep 2, 2010

After 2 weeks of the nightmare that is KDE4 I've been driven back to S12.2 and the sanity of KDE3.5.

However, I'm unable to get higher res than 1024x768. Monitor is a BenQ G222HDL and card is an ATI Radeon HD4760.

Relevant section of my xorg.conf is:

As you can see I've mucked about a little bit with alternative drivers and resolutions and poked around via google without anything obvious popping up, but I suppose the driver is the issue. # randr only ever gives me 'can't open display'. I realize this is a new monitor on an older OS. Should I try the xf86 drivers from ATI, or will running xorgconfig do the trick with such a new card?

View 9 Replies View Related

Ubuntu :: Refresh Rate At 1920x1080 Resolution?

Mar 3, 2010

I just installed Ubuntu 9.10 I have ATi HD5700 and its Catalyst drivers downloaded from http://ati.amd.com

The monitor is Hanns-G HH251 (25", 1920x1080@60 max) I cannot make either "Display Settings" or "ATI Configuration" to show the refresh rate of 60 Hz as available. When I change the resolution to 1440x900 then I can pick 60 (but obviously I don't want that resolution). However, if I pick 1920x1080, the only two refresh rates available are 25 and 30 Hz, causing the image to flicker and whatnot.

View 3 Replies View Related

Ubuntu :: Setting Screen Resolution 1920x1080

Jun 20, 2010

Monitor: Asus VH242H
Graphics: XGI Volari Z9s

The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):

[Code]....

I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?

View 1 Replies View Related

Ubuntu :: Display Out Of Bounds At 1920x1080 Resolution?

Feb 5, 2011

I just put a HTPC together, it's a MSI 890GXM-G65 RT motherboard (on-board video, no video card) connected to a TV (SAMSUNG LED UN40B70) via an HDMI cable. I've put latest Ubuntu Desktop 10.10 on it. Installation went beautifully, the screen placed correctly, However, once it was actually running, the display is totally wrong. Looks like it's too far to the left and up - there's nothing on the screen except for background, at 1920x1080 resolution. Once I change the resolution to lower, it works.

View 2 Replies View Related

Ubuntu :: 1920x1080 Resolution Monitor / Does It Support Grub?

Jul 21, 2010

I installed Ubuntu 10.04 on a new system. The system is not showing correct resolution in the grub menu and the splash screen is black, until I reach the logon screen.Screen resolution, and video rendering after booting is picture-perfect.I presume this is a bug of the sort "VBE does not support 1920x1080 wide screen resolution".Or, maybe I am missing some point.I hope there must be some workaround.

View 9 Replies View Related

Ubuntu Multimedia :: Screen Scrolling/rolling When Resolution Is 1920x1080?

Mar 5, 2011

I recently bought a 37" Vizio M370NV HDTV and connected it to my Kubuntu 10.10 desktop.Currently my resolution is 1280x1024, so there is black bars on the side of my screen. I want my resolution to be 1920x1080, which is what the TV/monitor says is it's primary resolution. However, when I set that resolution in nvidia-settings, my screen scrolls up. By that I mean that my screen keeps moving up my monitor and appearing at the bottom.

View 9 Replies View Related

OpenSUSE Hardware :: Runlevel 3 1920x1080 Screen Resolution?

Feb 2, 2011

It's looking like from the options on the grub CL that the highest I can go is 1280x1020x32bit. But it still does not fit my entire screen (23'' LED) if there is a way to make runlevel 3 1920x1080, I have a Nvidia GTX460. Also, whether or not I can do it, how do I save the settings, so I don't have to type it in at the bottom of the screen in the boot menu? How do I drop back to runlevel 3, when I'm in the x system (GUI)?

View 4 Replies View Related

OpenSUSE Hardware :: Resolution 1920x1080 Don't Max In All Monitor Area?

May 21, 2011

I've instaled 11.4 and in personal configurations the resolution is set fine (1920x1080), but it's don't maximizes all monitor area. I'm using Radeon 5670 with a TV/Monitor HDMI connection 1080p.In Win7 running fine.

View 6 Replies View Related

Debian Multimedia :: Forcing 1920x1080 Resolution Via Catalyst Control Center?

Jun 7, 2011

I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.

Xorg.conf:
Section "ServerLayout"
Identifier†"Manual Layout"
Screen "Screen-0" 0 0

[Code]...

View 7 Replies View Related

Ubuntu :: Doens't Recognize Monitor's Resolution?

Aug 1, 2010

I'm not sure if this is the right category to ask for help but here it goes:I have a laptop with ubuntu 10.04x64 and i have bought recently a samsung xl2370 which has a max resolution of 1080p but the maximum resolution my laptop recognizes is 1440x900 is there any way to solve this?

View 3 Replies View Related

Ubuntu :: Possible To Scale With 1920x1080?

Jul 5, 2010

Was wondering if its possible to scale ubuntu theme/environment to suite 1920x1080. Im using my comp on a 42" plasma TV, and it gets kinda small with the default scale.

Don't want to change to a lower res, simple because it's not as pretty and the toolbars are almost hidden.

View 2 Replies View Related

Ubuntu Multimedia :: 8.04 Can't Get 1920x1080 From New LCD Monitor?

Oct 12, 2010

I finally decided to replace my monitor. I got a HANNspree HF225 with a native resolution of 1920x1080.

Alas, my Ubuntu 8.04 only allows me to select the 1400x1050 (50Hz) as the highest resolution.

I tried using gksudo displayconfig-gtk, to no avail. (yes, I also tried selecting Generic LCD display 1920x1080).

The strange thing is the monitor itself (via its OSD information) says it is running 1680x1050 (at H: 65.6KHz V: 60.3Hz).

Clearly, Ubuntu 8.04 can't see the real hardware capabilities of my system. My graphics card is "nVidia Corporation NV44 [GeForce 6200 LE] (rev a1)". I know it is capable of delivering the 1920x1680 because it has been previously driving 1920x1600 on a DELL P1110.

how to get 1920x1080 on my system?

View 8 Replies View Related

Ubuntu :: Icon And Text Too Small @ 1920x1080?

May 26, 2011

I just bought a new laptop with 1920x1080 resolution. I installed Ubuntu 11.04 via "wubi" just now, however everything in ubuntu is too small to keep my eye comfortable. I searched the web and forum and tried to enlarge those, but the solution was about Ubuntu front and folder icon only (change in "appreance", and "edit->preference"). The front and icon are still small in other applications, such as Google chrome, firefox. Note: the change of front size in chrome and firefox only changes those on the page, but not page background, not the size in tab and anything else.

View 2 Replies View Related

Ubuntu :: Can't Change Screen Reolution To 1920x1080 / Enable This?

Nov 27, 2010

I got a TV I'm using as a monitor, and it has support for 1080p (1920x1080 resolution), but I can't change it to that. I've tried using the graphical monitor preferences and adding to to xrandr manually and trying to change it, but it doesn't work.

The computer I'm using has a (crappy) intel g31 graphics chipset, could this be why? I looked it up and it says it should support it. It also says that it needs a special fix/driver because they had problems, but I can't/don't know how to get the driver on ubuntu.

View 1 Replies View Related

Ubuntu Multimedia :: Bars Not Visible At 1920x1080 On Vizio HDMI?

Feb 19, 2010

Im using a Vizio 22" 1080p LCD HDTV has a monitor for my Ubuntu server over HDMI. It works great, except I cannot see the top or bottom bar at any resolution. Id really like to get it working at 1920x1080. Ive been tinkering with the xorg.conf a bit to no avail.

View 5 Replies View Related

Debian Multimedia :: 1920x1080 - Screen Is More Large Than LCD

Jun 10, 2015

I have a Sony Vaio vpc-sb1v9e connected to a Asus22ti1 monitor. I have installed Debian 8.1 and the resolution is 1920x1080 with the hdmi port connected. The problem is that the desktop not fit the monitor size, and is more large and more higher than the monitor.

Here Code: Select allxrandr output:

Code: Select allmichele@nbook:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
   1366x768      59.94 +
   1360x768      59.80    59.96 
   1024x768      60.00 
   800x600       60.32    56.25 
   640x480       59.94 
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)

[Code] .....

What's the problem? How can I restore the correct size?

View 5 Replies View Related

Ubuntu Multimedia :: HDMI Output To 32" LCD (1920x1080) - Nvidia And Video Performance

Apr 24, 2010

I have noticed that, using nvidia's latest drivers, HDMi output to my 32" LCD (1920x1080) and totem or vlc, the video on my LCD gets a bit "choppy" when the image changes faster.. some bars start appearing on the moving parts of the image.. like the system is having trouble rendering the video. This doesn't happen on my laptop screen even when both displays are running at the same time.

Also, this problem doesn't appear in windows 7, everything works perfectly there with one odd thing... the picture gets "choppy" on the laptop screen when I'm running both at the same time. It's not that noticeable, but I can tell the difference between windows and ubuntu in quality and it's annoying me

View 3 Replies View Related

Ubuntu :: Resolution Randomly Sets To Either 1024x768 Or 800x600 - Permanently Set A Resolution?

Dec 26, 2010

Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?

View 1 Replies View Related

Ubuntu :: Actual Resolution Is Only 1024x768 - Can't Get The Native Resolution (1280x1024)

Apr 5, 2011

I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.

View 2 Replies View Related

Ubuntu :: Changing A Display Resolution If You Have A Higher Resolution In 9.1?

Dec 7, 2009

I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.

View 9 Replies View Related

General :: Video Resolution Out Of Range Change Setting To Recommended Resolution 1280x1024

Oct 14, 2010

When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.

View 8 Replies View Related

Hardware :: Resolution Changed - Can't Return To Normal Resolution

Nov 20, 2010

I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.

View 3 Replies View Related

General :: Resolution Max Is 800x600 - Can't Set A Resolution Of 1024x760

Apr 2, 2010

I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?

View 2 Replies View Related

Fedora Installation :: Get To Start The Install Process In A Resolution Other Than The "Optimum Resolution"?

Dec 5, 2009

I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.

View 9 Replies View Related

Ubuntu :: 10.4 Won't Recognize 8.04 Usb

Oct 14, 2010

I just installed 10.4. I had a USB HDD that contained an old (8.04) version. I wanted to format the old drive. But whenI plugged it in UBUNTU won't recognize the drive. It's like there was not USB drive I know the connection works cause it works on Windows (XP Pro)with the same enclosure.

View 8 Replies View Related

Ubuntu :: How Much RAM Can 11.04 Recognize And Use Accordingly

May 28, 2011

I understand that RAM capabilities is mainly based on your mobo, but lets say the mobo can handle 32gigs (Exaggerating here). I'm currently running 2 gigs on my current system, and am thinking about bumping it up to maybe 4, 5, or even 6... I know my system can handle more than 2 (which is why I'm doing this, and I'm trying to do high RAM tasking things) so how much RAM can ubuntu 11.04 64 bit OS handle, recognize, and use to potential? I've googled it plenty of times, but I'm only coming up with people saying "oh it's whatever your mobo is capable of," which is true, but I want to know if there is like a pre-determined limit that 11.04 64 bit OS will only use if installed.

Like how some 32 bit OS will only use lets say 3.0-3.5 gigs of an installed 4 gigs. I don't want to go out of my way and spend money on a few extra gigs if my system will only recognize a portion of it. I know my 64 bit will recognize whatever I'm willing to pay (which won't be too much more ) but I'm just curious.

View 7 Replies View Related

Ubuntu :: Won't Recognize Usb Or Disc

Feb 1, 2010

When everything was working fine, when I inserted the usb or disc an icon would appear asking if I wanted to mount the drive. Now nothing appears. It's been like this almost a year.

View 9 Replies View Related

Ubuntu :: Lucid Does Not Recognize RAM?

May 3, 2010

I just upgraded from 9.10 to 10.04 this morning and half of my RAM is not recognized!

Specs: Pentium 4 2x 2.80GHz, 1001.6 MiB RAM (should be 2x this), Ubuntu 10.04.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved