Software :: Windows Computers Can't Resolve Samba Share Names In 10.04
Oct 2, 2010
After upgrading my ubuntu server from 9.04 to 10.04, the window computers couldn't resolve samba shared names anymore, the error code displayed by Windows was 0x80070035.
I was using the ubuntu server as a samba server, using 'share' as the security authentication method, it has been working very well under previous ubuntu versions but, after upgrading to 10.04, the windows computers can't access the server shares anymore; the linux computers don't have any problems (I can access the shares from linux).
As a workaround, I've added the name of the server in c:windowssystem32driversetchosts; but I'd like to know how to fix the problem without modifying every windows computer.
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
i'm trying to automount a samba share on computers startup, everything works just fine when the network adapter is controled by traditional way ifup but when i'm switching to NetworkManager doesn't work anyway. i'm hiding the share information from the common user by using the /etc/samba/cifstab as i read on intrernet, in the cifstab i put //server/share /home/user/share cifs sername=user,password=pass,uid=1000,_netdev .could anybody give me a hint or tell me where to look?
I have a samba share setup as the following. When I browse to it from PC's added to my AD domain, they connect instantly. When i browse to it from a laptop that's not part of the domain, i get prompted for login credentials. what credentials should I be putting in? I can't seem to figure it out. or is it because i have the workgroup set to what my AD domain name is, and the laptops aren't part of that domain.
path = /data/photos browseable = yes force user = pictures force group = picturesgroup
I have a samba share that was previously hosted by and accessed by Windows operating systems. As a result the filenames of all the files are not very command-line/linux friendly. I need to get a script or app that can go through the samba share recursively and change all file names to lowercase and replace spaces in the names with a ".", "_" or something.
On one of my Samba shares on my server I have a folder of mp3 files of my CDs. The one I am having an issue with is "Clarence Carter/Dr. C.C." (yes, the one with the ULTIMATE party song). The "Dr. C.C." folder name is normal locally on the server, but across Samba it comes out "DMOU3A~H". It's definitely Samba doing it, because I get the same result whether accessing the share from Linux or Windoze. I can still access the folder this way, but it would be nice to not have Samba mangle the folder name this way. I am using Samba 3.4.2 on an Athlon64 X2 system running Slackware64.
I just recently constructed a computer to create a nice Fedora Linux server to replace a Mac Mini server that I have been using for a few years. I'm attempting to create a Samba share for my machines, a Windoze 7 machine as well as a couple MacOS 10.6 machines. I've set up Samba, started the service, allowed Samba in the firewall, and used system-config-samba to set up a share with a user. I created a User called "space", and a share /media/peliculas/Movies (a mounted hard drive). When I type in \IP_ADDRESS in the address bar in windows 7, I get the option to log in. I log in correctly and I see two directories "space" and "Movies." Unfortunately when I click on one of them I get the following error message:
Windows cannot access \IP_ADDRESSMovies Check the spelling of the name. Otherwize, there might be a problem with your network. To try and identify and resolve network problems, click Diagnose. I also get something similar when I attempt to connect with my mac machine. Using "Connect to Server" I type in: smb:\IP_ADDRESS, and login, I have the option to mount "Movies" or "space." If I select any of these, I get the following error message: There was an error connecting to the server "IP_ADDRESS." Check the server name or IP addres, and then try again. If you are unable to resolve the problem contact your system administrator.
Also, if I type 'smbclient -U space -L IP_ADDRESS' I can see the "Movies" in the "Sharename." At this point I'm not sure what else to do, and have been trying to figure this out for the last few days (losing sleep due to being baffled). The only thing that I can think of is that I have something wrong with the smb.conf file. Here is what it currently displays:
workgroup = WORKGROUP server string = Samba Server Version %v log file = /var/log/samba/log.%m max log size = 50
One last thing, when I check the log files, there are error messages that state: smbd/service.c:1009(make_connection_snum) '/home/space' does not exist or permission denied when connecting to [peliculas] Error was Permission denied --Windoze 7 and MacOS 10.6 log files
I configured my dns server running on redhat5(test.com, ip-192.168.10.1), all is working perfect on the server its-self and on the client machine(xp), it cant resolve the name [url] but can resolve when i use [url]are ok, nslookup displays the following error:
The reverse is working fine from the redhat machine, NO firewall on the client xp machine xp as host name is added in /etc/hosts
I got my server set up with 10.04, and with everything installed: DHCP, SSH, Samba, VBox, etc.
DHCP, SSH work fine, but I am having problems where I cannot ping the hostname of the machine.
It worked for a few minutes after I got everything installed and now it's not letting me connect via hostname. I can connect fine if I use the IP address. I cannot ping the machine by hostname unless I add it's IP address to the hosts file.
I have an internal domain (dev.lan) for which my Ubuntu server is authoritative. We have a number of subdomains under that domain (test.dev.lan, svn.dev.lan, etc.). The server also acts as the primary DNS server for my office. It was originally set up under Ubuntu 8 and worked great.
However, ever since we upgraded to Ubuntu 10, our Windows clients periodically lose the ability to resolve domains on the dev.lan domain. Internal IP addresses can still be pinged from the Windows machines so it does not appear to be a network-connectivity issue. External domain names continue to resolve without any problems. The only workaround is to restart networking on the Windows clients. It's frustrating because it happens several times a day.
I have a LAN of about 70 computers that I would like to share media files between. I have gotten to the point with Samba that I can view the files without a username/password from client PC's. I would like to make all the folders read only except for one which will be writable for everyone. The thing that I am having a hard time with is allowing a couple of administrators (on Windows 7 machines) read/write access for all files/folders. I am completely new to Ubuntu and Samba so please make explanations thorough. Here is /etc/samba/smb.conf file:
I just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
I have been trouble shoot for whole day. I still cant figure out where is my error on write access deny for backup directory on windows SP3. It can read data on explore users by \10.1.23.124ackup code...
I am running Ubuntu 9.10 on my desktop right now. I have an external western digital terabyte drive plugged into it. I am able to see it and view it fine. Let's work with my music folder for example. I want to be able to access this music from my Windows 7 laptop so that I may add it to my itunes. However, when I enter the \servershare from the windows 7 laptop it says that the "server" is found but the "share" seems to be invalid. I've checked this 20 times and setting the share name to "music". I've rebooted 2 times on each computer yet to no avail. If I make a share on the Ubuntu desktop I can access it from the laptop. So it seems like it just gets lost when looking inside the external. This was just working last week, then I had to blow away they win 7 lappy and now it just won't work!
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions: - what is the best solution to mount shares, so I can access all the SVN repos? - How can I access normal files and folders from a share with svn? - How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"... - Some checkouted scripts (Perl, etc.) use libs from shares: "Use lib qw(r:/tools/perl/lib/). how to get around this as well? - How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$? - How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
I have an Ubuntu server with some shares and a Windows XP client in an active directory, i've created all the right accounts but can't seem to connect my linux box from the XP machine wouldn't the user name box popping up with ACTIVEDIRETORYNAMEusername like that? hope that makes sense, the account to access the share is locally created on the linux box?
I had a connection to my other Windows computer the other day automatically in the Places-->Network-->Windows Network folder but it now seems to have disappeared. I tried going to Place connect to server and typing in the WIndows computer name but it won;t connect and errors out. I also tried the IP: Cannot display location "smb://%5C%5C192.168.1.36/"
i hav configured samba share in RHEL 5.4 , it can be accessable from other linux machine but i want to access it from windows machine, how can i do it? i also want want to know that in RHEL my partitions are in ext3 format, so how can windows can detect this partition, Is samba share is independent of filesystem on either machines
case2:--- i hav configured samba on windows server 2008 , how can i mount it on linux machine
I am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
[global] netbios name = KISKA cups options = raw load printers = yes server string =
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
running a Ubuntu 8.10 Desktop in the living room with a LOT of files. I've tried all week to get this working, and can't tell where the problem is. I want to make a music share that will: Allow guests, but as read-only Allow me to mount in Windows 7 with the user 'thecheeks' Give user thecheeks read/write access to that share
I swear Samba ends up working but maybe the problem is with Windows 7. I looked at the SAMBAWiki Win 7 page and made sure my registry values were what they should have been (and they were).
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2] tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher] ps5ui.dll pscript.hlp pscript.ntf pscript5.dll
However after checking this, I dont have the files named within int he correct folder on my windows system :
%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.
ubuntu 9.04 and win xppro i've been pounding my head aganst this for hours now. reading anything i can find samba works mostly shares created from nautilus work fine from both ubuntu and windows if i check to allow guest access if not i can not log in it does work in the nautilus browser fine. shouldn't make a difference but am using a virtualbox win xp guest shares work without issue. printers work here is a dump of my service defenitions
[global] workgroup = HOME server string = %h server (Samba, Ubuntu) map to guest = Bad User
I have a linux box that I'm using to mount a windows 7 share with samba or cifs. The mounting itself goes fine, but directories with more subdirs or files do not seem to have all the content they actually have.
For example, viewing my music folder shows only first 37 subdirs. The ls says "total 49", which is the correct amount, but the listing itself shows only 37 first in alphapetical order.
On the other hand, my wallpaper folder contains 122 files. Ls claims there is 41872 and displays only 70.
Adding the mount option noserverino increases the listed files or dirs, but it still does not show them all.
I've tried to enable debug printk level, but dmesg doesn't show anything interesting.
I've tried to change values in /proc/fs/cifs, but it does not seem to have any effect.
I've tried changing samba package. So far I've tested with 3.5.7, 3.5.2, 3.5.4 and now 3.5.8.
My distribution was yesterday slackware 13.1. Today I upgraded to 13.37 (with samba 3.5.8) but the problem persists.
I've tried with kernel versions 22.214.171.124, 126.96.36.199 and 188.8.131.52.
want to made 2 users in samba by which windows machine we access share, say user1 has read,execute permission, user2 has read write delete update full permission. we have done user1 configuration as premia user. we need your guideline for user2
we change the smb.conf file # less /etc/samba/smb.conf [global]