Software :: PuppyLinux Installation - (loading The Lup525.sfs Mainfile) To Ram - Kernel Panic Not Synching Attempt To Kill Init

Apr 27, 2011

When loading puppy linux on my computer from a CD I get an error message on the third step which is (loading the lup525.sfs mainfile)to ram. kernel panic not synching attempt to kill init. The CD works on other computers with no problems. My computer is a dual boot XP and Win7 machine.

View 3 Replies


ADVERTISEMENT

OpenSUSE Install :: Getting Error Message: "Kernel Panic - Not Syncing: Attempt To Kill Init"

Mar 17, 2011

I tried to install OpenSuse via LiveCD this morning I got following Error Message: Kernel panic - not syncing:

[code]....

I am using the 32bit-Version of OpenSuse while running this on a 64bit Dualcore. Could that cause the issue?

View 4 Replies View Related

Ubuntu Installation :: Error - Kernel Panic - Not Syncing: Attempted To Kill Init

Jun 8, 2011

Today I was upgrading my netbook with Ubuntu 10.10 on it to 11.04 via the Update Manager. I got a few errors and the Update Manager seemed like it wasn't continuing, so decided to exit it. It didn't respond so after a while I decided to restart the netbook. However the on/off/standby/restart, etc. button in the top right wasn't responding either, so I decided to force a shutdown with the power button on my netbook. Now Ubuntu doesn't start up, and gives me an error along the lines of:

Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35-28-generic #50-Ubuntu Now could I in some way repair my Ubuntu installation while still keeping the files I already have on my computer? Maybe via booting from a flash drive or something...?

View 3 Replies View Related

General :: Kernel Panic - Not Syncing: Attempted To Kill Init?

Jan 4, 2010

I used ubuntu in my ARM board. but now i rebooted it says that "kernel panic - not syncing: Attempted to kill init!" i have to reinstall my OS or any other way to get retify?

View 4 Replies View Related

General :: Kernel Panic Not Syncing Attempted To Kill Init?

Sep 12, 2010

Our email server and fax server configured in a Linux server.2day mornin onwards i am getting the error.kernal panic -not syncing : attempted to kill init.

Bootin "powerserver"(Centos-4 i386)-up( 2.6.9-11 EL)
root (hd0,0)
Filesystem type is ext2fs,partition type 0*fd

[code]....

View 1 Replies View Related

General :: Kernel Panic Not Syncing Attempted To Kill Init

Sep 20, 2010

How to resolve "kernel panic not syncing attempted to kill init" problem in Linux?? And why this error occurs? In my case, this error occurs when i boot my computer and after this error my computer goes on rebooting..

View 1 Replies View Related

Programming :: Kernel Panic - Not Syncing: Attempted To Kill Init

Oct 12, 2010

am trying to interface ade7758(adc) to at91sam9261...i have written a sample code which registers an spi driver and sends an address to ade7758 and receives a data...every thing is fine.My device is registered but kernel is giving a crash message....below is the message....

[Code]...

View 6 Replies View Related

CentOS 5 :: Kernel Panic - Not Syncing : Attempted To Kill Init?

Jan 15, 2010

I am getting :

exec of init (/sbin/init) failed!!! : 2
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init! My server is at remote end which I access through Public IP.

View 5 Replies View Related

Debian Installation :: "Kernel Panic Not Syncing: Attempted To Kill Init"

Nov 4, 2010

I boot from CD (Tried both debian-506-i386 and the Netinstall) I also tried the flags acpi=off noapic nolapic And when it starts booting the install, it appears: "Kernel panic- not syncing: attempted to kill init"

View 5 Replies View Related

Red Hat :: Kernel Panic Not Syncing Kill INIT - No Volume Groups Found

Mar 20, 2011

I just imaged my RHEL 4 system that was running on a Dell Poweredge 2950 server using Acronis software and I restored the image to a VmWare virtual machine.

Dell Poweredge 2950 - RAID 5
VmWare - using ESX 4.0
OS - Red Hat Enterprise Linux 4 ES Update 5 x64
kernel - 2.6.9-55.0.9.ELsmp

I'm getting the following when I try to boot on the new virtual machine. I'm thinking it has to do with the fact that it's new hardware and it's having trouble either finding the right drivers or pointing to the correct place.

"No Volume Groups found
Volume Group "Volgroup00" not found
ERROR: /bin/lvm exited abnormally! (pid505)
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd/dev failed: 2

Kernel panic - not syncing: Attempted to kill init!"
I was able to boot into Linux rescue mode using the boot CD. Then I typed:
#chroot /mnt/sysimage

Here's all the info from the commands I typed:
#ldd /bin/bash
libtermcap.so.2 => /lib64/libtermcap.so.2
libdl.so.2 => /lib64/libdl.so.2
libc.so.6 => /lib64/tls/libc.so.6
/lib64/ld-linux-x86-64.so.2
#uname -a
Linux localhost.localdomain 2.6.9-89.EL x86_64
#df -h ....

I've tried the following:
1. mkinitrd -v -f /boot/initrd-2.6.9-55.0.9.EL.img 2.6.9-55.0.9.EL
2. modified the device.map to point to /dev/sda3
3. changed the SCSI controller in Vmware to use BusLogic instead of LSI Logic. (didn't work because I'm running 64 bit.. gave me an error message)
4. grub-install --recheck /dev/sda
5. tried booting to differerent OS versions (i.e. 2.6.9-55.0.6, etc.). I tried all of the versions listed in the boot menu.
None of these worked.

View 2 Replies View Related

CentOS 5 :: Custom Kernel Panic - Not Syncing: Attempted To Kill Init?

Apr 5, 2011

I got the following error after compiling kernel version 2.6.38.2 from sources with this Howto:[URL].. Creating root device.

Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults

[Code]...

View 2 Replies View Related

General :: Kernel Panic - Not Syncing - No Init Found - Try Passing Init - Option To Kernel

Apr 19, 2011

Im am building a Linux distro. It will be very tiny and fast.

I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.

The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.

When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.

The kernel works OK with others initramfs/initrd files. But not with my own.

Quote:

Here is how the end of the kernelcomplie look like.

Quote:

Here is my init file who is the initrd/initramfs source.

Quote:

The initramfs folder contains "bin" (folder) and "init" a file. No more.

The problem is that the kernel cannot find/read init file.

View 4 Replies View Related

General :: CentOS - Kernal Panic -not Syncing Attempted To Kill Init?

Apr 7, 2011

I was unable to access the server and had to reboot it. When the server was booting after the Grub, it errored out withKernal Panic -not syncing Attempted to Kill init!!exec of init (/sbin/init/) failed No such directoryI reboot into the recuse mode from the CD and when looking for the installed OS.I got an error like thisFound OS but with errors.Mounting part or all of your system at /mnt/sysimage.. something of the sort. I've run fsk -y on the /boot and root drives and rebooted but still the same issues.Here is my grub.conf:

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file

[code].....

View 7 Replies View Related

General :: PClinuxOS Hangs On Boot - Kernal Panic- Not Syncing - Attempted To Kill Init

Jun 7, 2010

I recently installed new hard drive and cloned old hard drive software onto it. The bootloader installs either linux or other operating system. Ever since the cloning, boot hangs. Words in the thread title are the last to appear before everything grinds to a halt. Just before the kernal panic message appears, "Initrd finished" is last line. Will have to try booting again to find more info before this.

View 7 Replies View Related

Fedora Installation :: Kernal Panic - Not Synching - VFS - Unable To Mount Root Fs On Unknown Block - 0,0

Aug 14, 2009

I've got the following system:

Quote:

I've been having problems with the system ever since I replaced the motherboard. Moving slow and just generally acting 'wonky.' Well the other day I reached my frustration limit and wiped the HDD. Up to this point the HDD had been in 2 partitions, one for the DELL diagnostics and one for the OS, XP Pro.

I decided that I wanted to set up the system in a dual-boot during the rebuild so I created a two partitions using the Windows install. Partition one is the DELL Diagnostic partition, partition 2 is the XP Pro partition and partition 3 is to be the Linux partition. All seemed to go well with the Windows install. I got the OS up and running and got all the updates done and drivers installed.

I only have the one HDD in the system so I was going to have to make this dual-boot off of one HDD.

I had previously, within the past week or two, downloaded the .iso and created the disk for FC11.

I went through the install process and successfully installed Linux on the 3rd partition, or so I thought. When I attempted to boot into Linux I got the Kernal Panic error.

My grub file as it exists now is:

Code:

If I leave the file as is, I get the kernal panic error but the splash image works fine. If I try to change the 'splash image' and 'root' references from '(hd0,2),' then neither works.

I can boot into Windows XP from the setup as it is now.

I if I boot using my LoaS (FC 11 made at the same time as the images for the cds were downloaded) I can see the hdd and multiple partitions. There seems to be a 'boot' partion, the Linux OS partition, a swap partion, as well as the Dell and XP partions. Now I've tried changing the references in the grub file to reflect the different partitions, basically I've tried 2, 3, 4 and 5, everything but 0 (the dell diagnostics) and 1 (the XP Pro).

I've also re-wiped the HDD and started the whole process over from scratch, thinking maybe I'd hosed something up the first time, but being a firm believer in 'Always do what you've always done and you'll always get what you've always gotten,' and that one of the definitions of insanity it keep performing the same actions over and over and expect different results, I seem to be at impasse here.

Results from 'sfdisk -l'

Quote:

View 11 Replies View Related

Hardware :: New HDD Brings Kernel Panic - No Init Found

Feb 6, 2011

I just added an 80GB Maxtor 6Y080P0 HDD to my computer and when I'm booting into linux (Slackware 13.1) I get:
~
NTFS volume version 3.1.
VFS: Mounted root (NTFS filesystem) read-only on device 8:1.
devtmpfs: error mounting -2
Freeing unused kernel memory: 636k freed
Write protecting the kernel text: 9564k
Write protecting the read only data: 2448k
Warning: unable to open initial console.
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
pid: 1, comm: swapper Not tainted 2.6.33.4-smp #2
Call trace:
~
The HDD I'm booting from is a 20GB Maxtor and is the 3rd slave. The new 80GB one is the 3rd master.

View 1 Replies View Related

Software :: Kernel Panic Not Syncing No Init Found

Feb 28, 2011

having updated my Debian box, it ceases to boot kernel 2.6.32 with above error. Booting an older kernel (2.6.26) seems to run init without problems.

View 2 Replies View Related

Debian Configuration :: Kernel Panic - Not Syncing / Segfault At Init

Feb 19, 2016

I recently tried to install php5-gd package on my debian vmware server and it failed at libc6 - i386.

Afterwards every command other than CD caused a Segmentation fault and the server would no long boot, showing the following error

[ 4.808086] init[1]: segfault at 0 ip (null) sp bff4645c error 14 in init[8048000+8000]
[ 4.808372] Kernel panic - not syncing: Attempted to kill init!
[ 4.808442] Pid: 1, comm: init Not tainted 3.2.0-4-686-pae #1 Debian 3.2.65-1

View 0 Replies View Related

Ubuntu :: Kernel Panic Not Syncing Attempted To Kill The Idle Task Wubi Ubuntu Install

Dec 13, 2010

-Linux / Ubuntu.
-I am running Windows Vista

I just downloaded Wubi - To install Ubuntu on my computer. (Whether it's called Dual boot or running Ubuntu inside of Windows Vista I do not know.) Everything went fine, got a very easy little screen to ask what partition I wanted to install it on and how much size, etcetera, the download went fine, blablabla.

Problem: It asks me to reboot (This is the first reboot I got.), I say yes, it reboots, I get the booting screen where I get to pick between Windows and Ubuntu, I pick Ubuntu, and it gives me this 'error'.

Among other things it reads:

After this nothing happens - I waited about 25 minutes.

I manually turned off my computer - started it up again - once again chose Ubuntu and the same problem occured.

1. I looked around the Ubuntu folder inside my C a little, it shows the iso file as Ubuntu-10.04.1-desktop-amd64

2. Some other forum advised people with this problem to check their RAM, so I unplugged both, cleaned and switched them. (I have 2 GB ram total.) This didn't work. Same problem still occurs.

View 9 Replies View Related

CentOS 5 :: Kernel Panic Not Syncing No Init After Fresh Install Centos 5.3 Iscsi?

Jul 9, 2009

The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.

Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.

View 1 Replies View Related

Server :: Kernel Panic - WARNING: Can't Access (null) Exec Of Init ((null)) Failed

Aug 5, 2010

I have a server running Red Hat Enterprise Linux ES (2.6.9.55.ELsmp). When it starts up I get the following error: Uncompressing Linux... Ok, booting the kernel. Red Hat nash version 4.2.1.10 starting WARNING: can't access (null) exec of init ((null)) failed!!!: 14 unmount /initrd/dev failed: 2 Kernel panic - not syncing: Attempted to kill init!

After that I got no response from the OS. I have the installation CD, so I tried to start the rescue mode, while going through the steps I received an error stating that mounting to /mnt/sysimage failed and that if I want to I can access a shell. I really don't know what to do from here

View 6 Replies View Related

Ubuntu Installation :: Kernal Panic When Loading 9.10 Live CD On Dell

Jan 14, 2010

I have a Dell Dimension 2400 I got at a yard sale. Has the typical 512MB Ram, 80GB Hard Drive, 2.4GHz Celeron and the integrated Intel video and audio. I decided to put Ubuntu 9.10. However I got a Kernal Panic while loading the live CD. It gets to the white flashing Ubuntu Loco. It freezes. The lights on the keyboard flash and it complains of a kernel panic.

View 5 Replies View Related

General :: Kill XServer (Init 3 / 5 Does Not Work)

Feb 23, 2011

I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail.

The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

View 2 Replies View Related

General :: Initramfs - Attempted To Kill Init ?

Nov 10, 2010

For a special purpose I needed a initramfs - that didn't work. So I reduced the initramfs setup to the simplest.

Mount the root and switch_root into it. But that didn't work either.

If I go with the init-script for the initramfs I posted below the system prints out the switch_root usage-text from busybox. But the syntax is right, ain't it?

When I use chroot instead of switch_root then it prints the usage-text of init before the kernel panic.

If I try with "/sbin/init 5" then, after a while the system reports "init: timeout opening/writing control channel /dev/initctl".

In the other cases I get the following error messages before the system hangs: "Kernel Panic", "Attempted to kill init", "init not tainted"

(With the init script below there is a error saying:"sh: can't access tty; job control turned off". I know why it's there - but don't know if it is connected to this problem.)

This information may be important:
- The machine boots from a usb-harddisk
- /sbin/init on the new root is available
- the system on newroot is sane and runs perfect standalone (without initramfs)
- the system on newroot uses baselayout-2 with openrc
- busybox is built as static binary
- busybox version is v1.15.3

Here is the relevant data:

My uname -a on that machine:

Code:

Content of the initramfs:

Code:

View 1 Replies View Related

CentOS 5 :: Not Syncing - Attempted To Kill Init

Sep 23, 2009

I Downloaded the 6 CD's of CentOS installation , and I start install them on my machine :
Processor : Intel Pentium 4 -2.08 Ghz
Ram: 256 MB
cash :512kb
HDD: 80GB
(it is for home server purposes)

After the fourth disc the system ask to reboot the system ; so I restart it ok? What I get ? No OS. Just a long text :
I think the bootup run ok, then this line came out I think it reveal some thing that Pros will know it:
nash received SIGSEGV Backtrace :
[0x804fb35]
[0x488420]
[0x.........
[0x........
[0x......]
then
Kernel panic - not syncing: Attempted to kill init!

View 9 Replies View Related

Fedora Installation :: Kernel Panic On A HP?

Oct 1, 2009

The Fedora 11 Live CD was tested on a Dell and it is good. On the HP Pavilion a705w, with an Intel Celeron 2.93HHz w 760MB RAM, the install fails with kernel panic. The cd was burned on the HP.

A colleague suggested that the HP may not be compatible with the kernel. Are there startup settings that I might try to diagnose the panic issue? Perhaps there is a verbose boot up process that pauses so one can take notes?

View 1 Replies View Related

Ubuntu :: Kernel Panic On New Installation?

May 10, 2010

I decided to try Kubuntu (10.4 64bit) again today, it's been a few years since I last tried it. The installation went well, but now I don't seem to be getting past Grub. I get a message that says: Kernel panic - not syncing:VFS:Unable to mount root fs on unknown block(0,0) I tried to use the recovery mode option in grub but that gave me the same message.

View 9 Replies View Related

CentOS 5 :: Kernel Panic During Installation?

Aug 19, 2010

i m trying to install Centos 5.5 on a x86_64 machine i use kickstat and cobbler but during the %pre script the installation failed with the following message

kernel panic ; not syncing nmi watchdog does someone what can be the cause of that?

Here is the beginning of my kickstart file with the pre part

url --url=http://cobbler.int-evry.fr/cblr/links/Centos-5.5-x86_64
# If any cobbler repo definitions were referenced in the kickstart profile, include them here.
repo --name=el5-x86_64-rpmfusionnonfree --baseurl=http://cobbler.int-evry.fr

[Code]....

View 1 Replies View Related

Fedora Installation :: Preupgrade F12 Kernel Panic

Nov 22, 2009

tried preupgrade to F12 got uncompression error kernel panic-not syncing VFS unable to mount root fs on unknown block(0,0). H.

View 1 Replies View Related

Fedora Installation :: Kernel Panic - Not Syncing VFS ?

Jun 10, 2010

I've been using Linux for a few years, but this is my first time using Fedora. I installed it on an old computer last night and rebooted, and everything seemed good. I let it start to install updates, but after they were about half done I stopped it, turned the computer off, and went to bed. I know that was stupid of me, and I'm afraid it screwed something up because now when I boot I get the error "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(0,0)".

When I looked up the error on Google it seems a lot of people get this after installing a kernel incorrectly, so could stopping the update in the middle perhaps screwed with my kernel? Could I simply chroot into the installation from the live CD and run 'yum install kernel26'?

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved