Software :: How To Install And Boot Fedora 12 On An External Hard Disk
Sep 9, 2010
I have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) ï¿½Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
I have RedHat Linux running on my VBox guest on my Windows host. I need to install RedHat Linux on the attached external usb hard disk ,connected to my guest machine.how can install redhat on this external usb hard disk?
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
whether all 2TB external hard disks will run on ubuntu 10.04 (lucid)? I was under the impression that Seagate and Western Digital would, but the store where I went to buy it told me they won't. I really need to buy an external hard disk as I'm running out of the space
I have just updated to karmic, and I found that my external hard disk partitions, previously mounted under /media/disk and /media/fat are now referenced by something looking like a UUID, namely /media/7b096ea4-60ee-46b1-95cd-1851b051c40d and /media/4951-95D9.
Is there a way to revert to the old settings? Any application relying on the files on the external hard disk has now stopped working. While I certainly could just change reference (assuming the UUID does not change every session), I'd rather use the old names if possible.
I've 2 computers (one at the job, one at home), different motherboard types but same chipset, having AM2 AMD CPUs but different clock speed. I don't have (I don't want to buy) internal hard disks for these computers.
I would like to buy one external USB HDD and install the latest Ubuntu. I will carry this HDD to my job and my home. Is it possible to use this HDD as boot HDD on both computer? Even they are not same just similar? Is this a problem for Ubuntu?
my old pc died not long ago so I retrieved its hard disk and bought a USB enclosure. that HD had a ubuntu 9.04 partition and an XP one. Something must have gone wrong somewhere as, although i could still boot from jaunty, I was not allowed to upgrade.
It therefore seemed to me natural perform a clean install, so here's what I did:
- on a win7 computer, I inserted a 9.10 bootable disk
- with usb-disk creator, I wanted to install via a spare image so re-formatted the HD
- I couldn't install a mythbuntu 9.10 after that as I giot an error message ("can't mount the drive" or something similar). yet, in win7 the HD is recognised.
So, what am I doing wrong? Are USB HDs not included as USB devices that you can make bootable? Or should I be installing a !straight" ubuntu version, then install MythTV?
My ubuntu login window seems to be chrased and seems no way to restore it. I was planning to move ahead with reinstalling it but could any1 tell me how can i copy data to external hard disk. I am in Mannual restore section with promt staying at root@ubuntu :/#
I have Red Hat linux server with update 8. Explain me in detail how to connect external hard disk to linux server so that it will detect it. Also let me know how can i come to know whether the linux server has detected it. Also how to copy the linux server harddisk content/data to this USB External hard disk
I have an external hard disk with lots of big files and a lot of small matlab script files .m. I would like to grab all the files inside that harddisk that have the .m extension or the *.mat file extension (both are matlab files). Of course this is a -first-find the *.m files script and -then copy the files into the hard disk.
What I do not know is how I can also keep the structure of the folders containing the *.m and *.mat files when I will copy them in my local hard disk. As this external hard disk contains 2TB of data it is not possible to copy all the files first and then remove the unnecessary. So I have to find and copy only the files I need but with also keeping the tree structure that the external hard disk has.
I'd like to know if there is a software or a distro which does the following: Imagine having two PCs. What the software should do is allow to turn one PC's hard disks to be accessed as external hard disks. It would be great if I could tell which USB port and which hard disk should be accessible like this. Now when everything is selected properly one could just plug in the other PC's USB cable and have access to the selected drive.
Sometimes it may be necessary, or just convenient, to install Fedora from the DVD ISO file located on a local hard drive. The method I describe here does that, with two requirements. It uses GRUB4DOS, and the necessary files must be located on a FAT32 or EXT2/3/4 partition. Create the new partition and name it "FEDORA". It does not need to be a primary partition, and can be deleted later. An existing partition can also be used, but you will either need to change it's name as shown or put the correct name in the kernel line of the menu.lst file when that is created in step 5.
Use your favorite ISO program to open or mount the the DVD ISO image file and extract the /images directory to the root of the partition. Copy the DVD ISO image file to the root directory of the partition. Prepare a method to boot GRUB4DOS. See the following GRUB4DOS tutorial page for details about that task. [URL] Create a menu.lst file for GRUB4DOS with the following lines and place it in the appropriate location for your installation of GRUB4DOS.
Code: title F13 DVD Install find --set-root /Fedora-13-i386-DVD.iso map /Fedora-13-i386-DVD.iso (hd32) map --hook root (hd32) kernel /isolinux/vmlinuz repo=hd:LABEL="FEDORA":/ initrd /isolinux/initrd.img Now just boot GRUB4DOS, select "F13 DVD Install" from the menu, and install away!
For the GRUB4DOS direct-mapping to work, the ISO file cannot be fragmented. If the partition is fresh (newly created), that shouldn't be a problem. However, using an existing partition will likely fragment the file, and you'll need to defragment it with a Windows utility (FAT32) first. I've actually only done this on FAT32, but EXT should work too, theoretically... Translation - use FAT32 on a new partition.
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
Hardware: Toshiba Satellite L755Software: openSuse 11.4 with kernel 3.1.0-rc1-98-g72fa599-1-vanillaPeripherals: Logilink USB 3.0 to SATA HDD Adapter with Western Digital WD2500JSI installed the Vanilla kernel in the hope that USB 3.0 will work. But though some things really have been fixed (for instance, the notebook can resume from sleep mode), USB 3.0 still doesn't work.
Code: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have this unique situation, I think. My TV plays certain files only through external USB storage. My Ubuntu server stores all of these files on local hard disks. I do not want to buy an external hard disk and then keep moving it between both. Now, strange as it may sound, is it possible to somehow connect my server to the PC and expose a given local hard disk connected to the server, as an external USB drive to the TV?