Slackware :: Error: Cannot Open Basenames Index Using Db3 - No Such File Or Directory (2)
May 11, 2010
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
I have just installed SABnzb application in my home folder. The executable file is SABnzb.py When I run the command in the Konsole # python SABnzb.py I have this Quote: python: can't open file 'SABnzbd.py': [Errno 2] No such file or directory
I just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code: bash-3.1$ ghb (ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory (ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
I've encrypted the /home partition. I've been successful in doing this by following the instructions here:slackware64-current/README_CRYPT.TXTBut after upgrade to cryptsetup-1.2.0-x86_64, when I boot up I get 'no such file or directory while trying to open /dev/mapper/crypthome'I have to manually type 'cryptsetup luksOpen /dev/sda9 crypthome' and mount each time to get into the encrypted partition.I expect to be prompted for the password on boot but I just get that error, what is wrong?my config files:
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code: audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
When I first installed VMWare Workstation and Player everything ran great. I guess after a system restart things started to get buggy. When trying to load my virtual machine I get the following error:
Could not open /dev/vmmon: No such file or directory.make sure that the kernel module `vmmon' is loaded.Failed to initialize monitor device. Unable to change virtual machine power state: Cannot find a valid peer process to connect to I have tried running as root, through terminal, and reinstalling. The window still shows up eventually.
i use fedora 12 i can't use yum any more , when i try i find error message it was working correctly and i donn't remember what i did
[root@PC ~]# yum list installed| grep -i nmap rpmdb: Thread/process 2405/3078244032 failed: Thread died in Berkeley DB library error: db4 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery
Can you help me to install OpenCS PKCS on Ubuntu 10.10 with Firefox 3.6. I have smard card reader Gemplus
Here is error:
dejansoftware@ubuntu:~$ pkcs11-tool --show-info Error: can't open /var/run/openct/status: No such file or directory Error: can't open /var/run/openct/status: No such file or directory Error: can't open /var/run/openct/status: No such file or directory
I'm trying to install a WiFi Wireless IEEE 802.11N/G/B WLAN 150Mbps Network Adapter USB2.0 on Slackware. I get the following message when I enter "make install." cannot stat rt3070sta.ko no such file or directory
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
You may know the Humble Indie Pack 2, which is a set of crossplatform indie video games. There's one game in the bundle that doesn't offer a 64bit build and therefore it fails to load. It's called Braid and that's what you get when you try to run it: $ ./braid ./braid: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
Of course the 64bit libs for OpenGL and the propitiatory nvidia drivers are installed, but the game asks for the 32bit ones, at least to my understanding. I do know that why can install 32bit libraries on a 64 bit linux system (we do that for the sake of crappy Adobe Flash), but I don't know where to find these libs (searching the repo with keywords like .i586 or ia32 led me nowhere).
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
I am currently using Ubuntu 9.10. I am writing a small code in C which test the connectivity with MYSQL. I am getting this error. "libmysqlclient.so.14: cannot open shared object file: No such file or directory" What I understand is that you need MYSQL development package in order to access MYSQL database in C. I installed MYSQL using this command. apt-get install mysql-server mysql-client
I created a USB Live disk and installed Fedora 12 to my Asus EEE 1005HA (12 inch screen). The machine boots fine, but Hardware Graphics acceleration is not working correctly. If I stop X11, and type "Xorg -configure", the Xorg utility recieves a segmentation fault and exits, and the resulting xorg.conf file does not work correctly. The error is "(EE) open /dev/fb0: No such file or directory". All the correct packages are installed, and there is no logical reason why it is failing. The rest of the hardware on the EEE works fine.
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory