Slackware :: Current Refuses To Inkscape Slackbuild?

Dec 8, 2010

i clean installed 13.1 x64, then upgraded to -current with no issues. everything seems to compile and run fine, except for inkscape. i downloaded the slackbuilds of inkscape and all its dependencies, and all their dependencies, and installed them in the proper order, however, when i run the inkscape.Slackbuild, it takes like 30minutes and then exits with the following messages:

/usr/lib64/gcc/x86_64-slackware-linux/4.5.1/../../../../lib64/ undefined reference to


View 1 Replies


Slackware :: Update To -current 30 Nov, Inkscape Cannot Run?

Dec 3, 2010

after i update to -current 30 nov, inkscape cannot run. Code: inkscape: error while loading shared libraries: cannot open shared object file: No such file or directory and there are other error (friends of mine problem) inkscape in slackware. this is the error

(inkscape:9005): Gtk-CRITICAL **: gtk_misc_set_alignment: assertion `GTK_IS_MISC (misc)' failed Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at with a detailed description of the steps leading to the crash, so we can fix it. Segmentation fault

View 10 Replies View Related

Slackware :: Alien Bob's VLC Slackbuild Fails On Current / Fix It?

Jan 11, 2010

The error has to do with Twolame failing to compile. Which is strange to me because it compiled fine by itself with the slackbuilds build.

The error log is attached.

View 4 Replies View Related

Slackware :: LMMS Slackbuild Error Current (GCC 4.4.3)?

Jan 30, 2010

I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.

CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?

I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.

View 4 Replies View Related

Slackware :: Lmms Slackbuild Fails With -current?

Feb 2, 2010

got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;

[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -

View 3 Replies View Related

Slackware :: Ffmpeg Slackbuild Fails In Current Multilib

Jan 9, 2010

I was trying to use alien bob's slackbuild mentioned in another thread [url] and it failed everytime, so I tried to do it individually, building dependencies with sbopkg which worked except for Schroedinger and then ffmpeg still fails. I don't have access to the logs or fail messages at this moment, but I'm wondering if it is failing due to the newest gcc-multilib version? I'm also running kernel 2.6.33-rc3 with multilib-current.

View 4 Replies View Related

Slackware :: Slackbuild Failures On -current: Gtkglext 1.2.0 And Celestia 1.6.0?

Nov 18, 2010

I've been unable to successfully get a viable Celestia package created under -current with the 13.1 Slackbuild. First off, to build Celestia in the "default" Slackbuild manner, that is to say with the GTK front-end, you need gtkglext. (The Lua package built without issue.) The problem is, gtkglext will not build. It gets to the part of the build where it builds the "scanner" library (I have no idea what this library does in specific), where it successfully compiles, but then fails to link. The newest release of gtkglext is 1.2.0, which is from 2006, so I think that some of the symbols it is looking for when linking against -current's updated GTK libraries are depreciated. Here's the last bit of output from the failed build of gtkglext:


"error: 'abs' is already declared in this scope"?? There's a function or variable being declared twice that can't be right. Maybe two headers use the same variable or function name, and they're winding up in the same scope Like I said, I don't know. Hence, this post. I really like Celestia. I could live with the mystery of why these things won't build, but I can't seem to find any pre-built binary packages out there.

Of course, you can't try the KDE front end, since it will only work with KDE 3.

View 4 Replies View Related

Slackware :: ORBit2 Slackbuild Fails When Building 32 Bit Package On Current Multilib

Apr 10, 2010

I am trying to build ORBit2 as a dependency for GConf and then google-chrome.

This is a multilib system and I want 32 bit chrome.

Both my 64 bit and compat32 packages are all current as of today per

I have edited the Slackbuild as follows:


The build fails each time with:


I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.

I have run:


I've had no problems building this package with current in a pure 64 bit environment.

View 4 Replies View Related

Slackware :: Skype Begins To Startup Bombs After Installing Inkscape

May 27, 2011

I'm getting the following errors when I try to start skype:


I installed Skype from the package HERE. Everything was fine, all was stable and rosey, until I installed Inkscape today. I hadn't even noticed it wasn't running until someone got a hold of me and said they were trying to get a hold of me. When I went to fire it up, thinking that I had somehow inadvertently closed it, it sprang right up for just a second and then was gone. Same thing - three times in row. So I tried starting if from the command line and got that error. I can start it from the comman line as root, with the following error:


The deps for Inkscape that I installed, and in the following order, were all from the 13.1 repo, and the ones I didn't already have installed were:


View 1 Replies View Related

Slackware :: Can't Get To

Jan 10, 2010

For the last couple of weeks, I can't seem to reach [URL]... Browser just times out. Here's a traceroute: [URL]...

View 10 Replies View Related

Slackware :: Why Is There No Slackbuild For 13.1

Jul 5, 2010

I am going to try out a tiling wm and I have narrowed my search down to scrotwm and dwm. I installed scrotwm from but it did not show up as a selection when I ran xwmconfig? Any ideas as to why? So then I went install dwm from but saw there was only a build script for slackware 13 as opposed to 13.1 which is what I am running. So two questions for dwm, one why is there no slackbuild for 13.1, and two when I tried to use the slackbuild for 13 this also didn't show up under xwmconfig, any thoughts?

View 4 Replies View Related

Slackware :: No Wine Slackbuild For 13.1?

Jun 6, 2010

As always, very impressive effort from to get slackbuild scripts updated for 13.1. Thanks to all who maintain these scripts. One which does not seem to have made it to 13.1 so far is a build script for WINE. Anybody know whether this is beacuse of some problem ? Or just an oversight ? The 13.0 script is there - might be OK to just use this with 13.1 ?

View 9 Replies View Related

Slackware :: OpenEuclide 0.5 Slackbuild For 13.1?

Feb 27, 2011

Getting the hang of diff and patch, to a small extent...However, I couldn't get the slack-desc to print anything useful when running installpkg. Always had trouble with the slack-desc files.


View 11 Replies View Related

Slackware :: UTF-8 Error During SlackBuild?

Jul 9, 2011

i keep getting this error during gecko-mediaplayer build running 1337 stable up to date. has en us utf8 enabled, (it didn't work with en US either.


View 5 Replies View Related

Slackware :: X11vnc Slackbuild For 13.1?

Aug 24, 2010

it seems that there is no x11vnc slackbuild on sbo for 13.1. just wondering if there is something else people use to share the :0 desktop, or should i start looking into the 13.0 slackbuild

View 4 Replies View Related

Slackware :: A Slackbuild Killed Permissions?

May 2, 2010

At least, that is what I think happened.I was interested in trying out tilda, which needs the confuse libary, both of which are slackbuilds on slackbuilds.orgI built and installed confuse, and then went to build tilda but got some error I could not follow up on.However after this, nothing as a normal user would work!For some reason my libary directories, /lib64, /usr/lib64 and other key directories such as /usr/share and /usr/bin were set to have permissions 700It took me a while to figure out what was causing the problem.Can anyone confirm that the confuse slackbuild resets your permissions like this? Otherwise, what could have caused it?Can someone please give me the correct permissions for those direcories? Is it safe to just do chmod -R 755 /usr and /lib64?

View 14 Replies View Related

Slackware :: Got A Slackbuild / Package For TigerVNC?

Apr 15, 2010

I'm looking for a VNC solution with the RENDER extension. TigerVNC seems to do what I want, but I have only found precompiled packages for Debian.

View 2 Replies View Related

Slackware :: Get OpenShot SBo Slackbuild To Work?

Feb 20, 2010

I'm trying to install OpenShot for the second time. I was originally trying to make a slackbuild for this, when a new one appeared in SBo. It does not work for me, however. It seems that it has to run a python install script and this fails. The package then complains that it cannot find the mlt python bindings.

View 13 Replies View Related

Slackware :: Cannot Install SlackBuild 3.2.0 On 13?

Mar 8, 2010

I have downloaded the source package and the slackbuild package for OpenOffice 3.2.0.Everything seems to go well until doinst, then I get error messages about zero length files:



View 6 Replies View Related

Slackware :: Compiling The Glibc Using Slackbuild?

Oct 2, 2010

Im trying to recompile glibc from a working slackware-current system using source from a slackware mirror. I'm doing it for testing purpose only. Never done that before, so i'm not sure if i'm doing it right. I get the following error:


make[2]: Entering directory `/glibc-tmp-a44be92860d34519b0c9a4500878e2e6/glibc-2.11.1/iconvdata'
../Makeconfig:85: ../i486/config.make: No such file or directory
/bin/sh: line 0: cd: ../i486: No such file or directory
The GNU C library has not been configured.


View 14 Replies View Related

Slackware :: FBReader Slackbuild Fails ?

Apr 8, 2011

I have the latest fbreader.Slackbuild via sbopkg. The compilation steps seem to run OK until, if I understand this correctly, it starts work on libzlcore, at which point things go wrong :



The README says I will need liblinebreak, which I "Slackbuilt" with no problems.

View 3 Replies View Related

Slackware :: Fbreader.SlackBuild Uses /usr/lib In X86_64

Jan 13, 2010

I used the fbreader.SlackBuild in a 64bit system to create a package and I got some libraries installed under /usr/lib instead of /usr/lib64. FBReader seems to work fine though, so I'm not sure this is a problem. I guess it could be if some other app looks for those libraries. Just thought I should report it anyway.

I used UI=gtk if it matters.

View 6 Replies View Related

Slackware :: Ffmpeg Slackbuild Fails In 13.37

Apr 29, 2011


Trying to build ffmpeg in 13.37 but it fails with the rror above.

View 3 Replies View Related

Slackware :: How To Build A Slackbuild Script

Oct 29, 2010

Any links to a guide for building a slackbuid script?[URL]SlackBuild_Script don't show nothing!

View 13 Replies View Related

Slackware :: Kbluetooth SlackBuild For 13.37 And The Kernel

May 6, 2011

Tried to compile kbluetooth using the SlackBuild and it was going well until it got to here,


The script was ran using Slackware64 13.37 and the kernel. I've googled around and searched here, but haven't found anything "current" on the such a problem.

View 1 Replies View Related

Slackware :: KDE 4.4.4 Builds Fine With 4.4.3 Slackbuild?

Jun 2, 2010

If 13.1 and KDE 4.4.3 aren't new enough for anyone, I've just successfully built and installed KDE 4.4.4 with the slackbuilds for 4.4.3. I had to edit the Slackbuild for kdenetwork by commenting out the line that patches the source. Other than that everything seems to be fine, although I don't know yet if this is a good thing or a bad thing since I've just got it installed.

View 14 Replies View Related

Slackware :: Slackbuild For Netbeans 6.8 For Slackware64?

Apr 18, 2010

Anyone knows a slackbuild for netbeans 6.8 for slackware64?

View 5 Replies View Related

Slackware :: Install The HandBrake Slackbuild?

Dec 23, 2010

I was trying to install the HandBrake slackbuild. It gave me an error saying it needed webkit, so I check for it in, where I found it. Listing said it required two things: libsoup and icu4c. So I downloaded the slackbuilds for those two and they installed fine, then started the install for webkit.

It did its build thing for about ten minutes, then it errors out, but the error message is pretty convoluted so I'm not sure what its telling me. Here's the last few lines from the terminal:


Anyone know what went wrong, and what I need to do to fix this?

View 2 Replies View Related

Slackware :: Openoffice Slackbuild Installs But Won't Run?

May 13, 2010

I downloaded the slackbuilds files, extracted them, added the original source, ran chmod +x, ran ./, then found the resulting .tgz and installpkg'ed it. I was able to get through all of the steps listed without any error messages and everything seemed to be going well. However, now when I navigate to opt/openoffice.org3 (the created folder) and attempt to run any of the programs from kde nothing happens. When I attempt to run them in terminal I get the following message:

root@slacktop:~# soffice
/usr/bin/soffice: line 98: /opt/openoffice.org3/program/../basis-link/program/pagein: No such file or directory
/usr/bin/soffice: line 104: /opt/openoffice.org3/program/../basis-link/ure-link/bin/javaldx: No such file or directory
/usr/bin/soffice: line 129: /opt/openoffice.org3/program/soffice.bin: No such file or directory

is there some reason these files wouldn't be in there after a normal installation? I read the howto on several times to make sure I got all the steps right, and have tried uninstalling with removepkg and reinstalling and the same thing keeps happening.

View 2 Replies View Related

Slackware :: How To Write A Slackbuild Script

Apr 20, 2010

On my ubuntu system when I was editing pdf files I used PDF-ShufflerSo now I wrote a slackbuild script for my slackware 13 (xfce)To be more specific, I dont know how to write a slackbuild script so I try to edit the pyPdf.SlackBuild script, hopefully it works! So I want to give it in public view maybe someone need it some time.



View 1 Replies View Related

Copyrights 2005-15, All rights reserved