Slackware :: Compile 2.6.37 Kernel Patched With The Autogroup Patch On A Slackware 13.1 System?

Jan 13, 2011

it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??

View 1 Replies


ADVERTISEMENT

Slackware :: Performance Tweak /Kernel Patch Running Anyone?

Nov 19, 2010

[URL]... Anyone got this going on slackware? I've a single cpu and twincore here and the videos of the original patch were impressive. I tried it and I don't have /sys/fs/cgroup anything. So I added the cgroup scheduler in 2.6.35, but no dice. Do I have to go to git or 2.6.37??

View 2 Replies View Related

Slackware :: Alternative To 200 Lines Kernel Patch /sys/fs/cgroup/cpu Missing

Nov 19, 2010

I tried this : [URL].. Compiled my kernel with all cgroups options, but /sys/fs/cgroup/cpu, and i can't mkdir it.

View 14 Replies View Related

Slackware :: How To Compile / Upgrade Kernel 2.6.38.3

Apr 17, 2011

People, there is a tutorial to upgrade the kernel 2.6.38.3(compiling tutorial included =D) to Slackware 13.1??And, this upgrade generate a better performance on system??

View 14 Replies View Related

Slackware :: Compile Kernel With Only Needed Drivers?

May 20, 2011

config file for kernel compilation that will only contain the drivers for the current hardware that are needed for the running kernel?

i.e. I am not 100% sure which drivers I need to compile into the kernel but do not want to compile all of them for my laptop??

View 2 Replies View Related

Slackware :: Compile Devicekit Power 014 On Kernel 2.6.32 Fails

Mar 28, 2010

I'm trying to compile a newer version of devicekit-power (currently I have 009) so maybe I can suspend/hibernate my laptop again, after I updated the kernel. I installed every package "./configure" asked, so it made a Makefile. When I use "make", it builds a few files, then I get this error:

[code]...

Also, is upower-0.90/91 the same thing but newer?

View 9 Replies View Related

Slackware :: Make 3.82 Can't Compile Newest Kernel With Firmware Built-in

Jul 30, 2010

after upgrading to make 3.82, I can not compile the newest kernel: 2.6.35-rc6-git5´╝îit failed with:

GEN /home/aaa/tools/kernel/output/35/Makefile
CHK include/linux/version.h
CHK include/generated/utsrelease.h

[code].....

Maybe 3.82 has some backward-incompatibility that breaks kernel compilation.

[URL]

View 5 Replies View Related

Slackware :: Custom Kernel, Now System Is Unbootable?

Jun 26, 2011

I compiled my own custom kernel for the first time. I tinkered with different options, nothing to difficult. I actually didn't expect it to work the first time.

I had kept the original lilo boot config just in case something was to go wrong. Now when I try to boot the system, I always get a "VFS: cannot mount root system on (8,3)". I googled this and found that my kernel did not support my root filesystem (btrfs). So I made an initrd with btrfs kernel module, but it didn't help. I then got a string of errors about how /dev could not be mounted.

My question is two-fold. First, how come when I configure the system back to when it was first installed, it still won't boot? Im using the same kernel (2.6.37.6-smp). Second, how can I get myself out of this rut without reinstalling?

lilo.conf

Code:
lba32
append=" vt.default_utf8=0"
boot=/dev/sda
vga = normal
# Linux - Slackware
image = /boot/vmlinuz-huge-smp-2.6.37.6-smp
root = /dev/sda3
label = Linux
read-only

BTW, I have been maintenancing the system by chrooting into the device off of my slackware boot disk. Im on slack 13.37

View 3 Replies View Related

Slackware :: Slackware 13.1 VIA VT1708S Audio Driver - Get Working Without Rebuilding The Kernel?

Jun 23, 2011

I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?

View 5 Replies View Related

Ubuntu :: Compile Kernel With "sched_autogroup_enabled" Patch

Nov 16, 2010

Has anyone tried compiling a custom kernel (from git source), with the "sched_autogroup_enabled" patch on the current (fully updated) maverick meerkat?

If so, will the brave soul please share their experience and how they did it.

The reason I am interested in it is due to the fantastic desktop responsiveness gains.

View 5 Replies View Related

Slackware :: Can't Boot Updated Kernel Slackware Current

Jan 5, 2010

I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??

View 14 Replies View Related

Slackware :: HDMI Sound After Building A New Kernel ( Slackware 13.1 )?

Aug 21, 2010

I'm currently trying to install unRaid on Slackware following this tutorial :[URL].. I'm new to Linux and after many hours, i finally managed to build the new kernel for unRAID (2.6.32.9). But audio on HDMI port doesn't work I tried alsaconf without success. HDMI sound works when i boot into the old kernel.

My codecs are :

Code:
root@unraid:~# cat /proc/asound/Intel/code* | grep Codec
Codec: Realtek ALC888
Codec: Intel G45 DEVIBX
Code:
lspci -v:

[Code]...

View 4 Replies View Related

Debian Configuration :: Compile A Patched Driver For Use With RTL8187L Wireless Device

May 27, 2010

I have been trying to compile a patched driver for use with my RTL8187L wireless device and get this error.

rm -f ieee80211/Module.symvers 2>/dev/null
rm -f ieee80211/Modules.symvers 2>/dev/null
make -C ieee80211 all

[code].....

View 3 Replies View Related

Slackware :: Mousepad Patch Available For Find Button?

May 19, 2010

Mousepad in xfce seems to have a problem when compiled with the latest libraries. In Slackware Current (13.1 RC1?) the "Find" button stays disabled the SECOND time you try to do a "find". Because of this, you can only do one "find" without closing Mousepad and opening it again.I found a bug report for this problem in a forumr a different distribution:[URL]I have applied this patch to the current xfce source code on my local machine and it seemed to solve the problem.It would be nice if this patch could make its way into the 13.1 release.

View 4 Replies View Related

Slackware :: Recent Openssl Patch Broke Encfs?

Mar 8, 2010

I started up my machine this morning and entered my password to encfs as I do each day and was greeted with a message telling me my password was incorrect. I tried several times, checked caps lock but no joy.

The message (which I didn't copy and paste unfortunately) mentioned ssl and I remembered that openssl was one of the security patches I applied at the weekend. So I removepkg'd the two openssl packages (v0.9.8m) and then installpkg'd the original ones that came with slackware 13.0 (v0.9.8k).

View 4 Replies View Related

Slackware :: Crashed Shiny New Slackware System Into The 99 Error Wall?

Jan 14, 2011

pls delete this post if I should not do this as it is included in [URL]..How do I recover from the 99 error when I start my system? I can only get to my Slackware by booting into it from the Slackware DVD.I have re-run lilo but I keep getting the 99 error on start up.

View 10 Replies View Related

Server :: Mounting Ext3 File System As Ext2 On Slackware With Custom Build Kernel?

May 16, 2010

I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.

View 2 Replies View Related

Slackware :: Patch To Script 'init' Which In Mkinitrd-1.4.6-i486-5 -current

Mar 15, 2011

Make the code work when RESUMEDEV is a symbolic link which has a relative path.

[Code]....

View 9 Replies View Related

Slackware :: Iptraf In Current No Eth0 Displayed - Link To Patch?

Jan 12, 2011

In Slackware current there's a problem where iptraf does not show eth0. Here's a link to the bug report and patch.

[URL]

[URL]

I've had this show on 2 different current PCs. Kernels 2.6.35.10 and 2.6.35.7. This is with an Atheros AR8121/AR8113/AR8114, and Realtek RTL8111/8168B.

View 6 Replies View Related

Ubuntu :: RTAI Patch On 2.6.31.8 Kernel - System Doesn't Boot

Oct 19, 2010

I;m installing RTAI and I get this message. I can't seem to find the solution, because I really don't know exactly what the main problem is. There are a list of error,s and warnings that I 'm not sure from where should I tackle the problem: Here is what I get when I boot my 2.6.31.8 kernel with GRUB. (I used the RTAI x86 compatible patch):

[code]...

After that system does NOT boot.

View 3 Replies View Related

General :: Apply Kernel Patch - Couldn't Find File To Patch

Apr 8, 2011

I just want to upgrade my Slackware 13.1 kernel (2.6.33.4) to the latest stable kernel from kernel.org (2.6.38.2). I have never done anything like this and I am a Linux newbie, so I would appreciate a "Kernel Patching for Dummies" version if possible. I did do a search on this forum and most of what I read was over my head. I found an FAQ on kernelnewbies.org on "How To Apply A Patch" but when I attempted what they suggested, it said it couldn't find the file to patch at line 5 and asked me which file to patch. So I CTRL-Z'd out of there and came here. Here's what I tried:

[code]...

View 14 Replies View Related

Slackware :: How To Add Modules To Slackware's Kernel

Mar 24, 2011

I would like to recompile my kernel to add few modules to it but I would like to keep my current configuration so as not to have troubles with missing drivers for my hardware and stuff.

How do I do that?

View 7 Replies View Related

Server :: Get Last Patched Patch In Server?

Jan 20, 2010

How to find out the last patch , which was patched in the server? The OS list includes FREEBSD, RHAS 3/4/5 and redhat 8.

Is there a way to find it out without YUM or up2date?

View 3 Replies View Related

Ubuntu :: Using Tuxonice Patched Kernel

Dec 27, 2010

My laptop was not hibernating using default kernle and uswsusp.So I decided to try tuxonice from ubuntu ppa. Now hibernation and suspend is working beautifully on my laptop. But I have few doubts in my mind, since now I am using patched kernel from ppa will it affect the overall stability of system ? What if there is any kernel related update from ubuntu will I receive that update ? What if new ubuntu version is release, can I upgrade without breaking my whole system ?

View 2 Replies View Related

Slackware :: Cannot Compile Gksu In 13.37

May 5, 2011

I'm using sbopkg-0.35.0 in Slack 13.37, and Ponce's SBo-git current repository (but have the identical problem with the official SBo 1337 repository). I have installed GConf & ORBit2 from /extra & have installed the other dependencies (gnome-keyring, & libgtop) via Ponce's repository. When compiling libgksu, it errors as follows:

[Code]...

View 2 Replies View Related

Slackware :: Cannot Compile Libvirt On 64 13.1

Aug 26, 2010

I am in trouble compiling libvirt (latest version 0.8.3) to use with KVM in Slackware64-13.1.

Here's the output of make:

Code:

Config.log is attached.

View 9 Replies View Related

Slackware :: Catalyst 10.3 Won't Compile

Mar 26, 2010

I've downloaded and tried to install the newest ATI driver, but I get this error when I try to build packages:

Code:
./packages/Slackware/ati-packager.sh: line 56: unexpected EOF while looking for matching `]'
./packages/Slackware/ati-packager.sh: line 406: syntax error: unexpected end of file

I extracted the package and am pretty sure I found the source of the error (a missing ]) but I'm unsure of how to repackage the installer after correcting it. I did a google search and at least one other person has had this error: [URL]...

View 5 Replies View Related

Slackware :: Compile OOo Failed ?

Jun 18, 2010

Installed Slack-13.1 x86_64. Downloaded OOo_3.2.1_Linux_x86-64_install-rpm-wJRE_en-US.tar.gz and SlackBuild.

Started with:

Quote:

And ended with:

Code:

View 2 Replies View Related

Slackware :: Can't Compile In The Current And Its Getting A Little Old?

May 22, 2010

I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.

View 14 Replies View Related

Slackware :: How To Compile Tar.gz Source

Oct 25, 2010

How do you compile a tar.gz source on slackware?I am asking because I am about to download and install Slackware(x64), and I have some drivers that it may not have (Ubuntu didn't have them) and TrueCrypt source.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved