Slackware :: Connecting To WiFi On Startup With Shared WEP Key
Apr 24, 2011
I've recently acquired an old HP Pavilion ZT3000 and have decided to install Slackware, but I'm having trouble with the whole rc.inet1 configuration stuff. I've been able to connect to the internet manually with the following command:
Code: iwconfig eth0 essid [access-point-name] key restricted [my-wep-key]
(...and then use "dhcpcd" to get an ip address.)
As you can see, eth0 is my wireless interface. Not exactly sure why (the comp has a IR port,wifi and Ethernet.) I'm using a shared WEP key (I know the security implications of WEP). The key being shared is the reason restricted is a parameter in the iwconfig command. I've been trying to get it working through /etc/rc.d/rc.inet1 but I can't seem to setup rc.inet1.config correctly I'm not sure where to set the key to "shared"
I've searched the forums and I could use the working iwconfig command with ./bash_profile as a startup script. This has the problem I need sudo (ie setup /etc/sudoer), which seems like a lot of work, when rc.inet should work. And it also has the problem of having to enter my password THREE times (login, sudo iwconfig and for sudo dhcpcd) which is horrible (and I don't even know how it would work when I set X to begin on startup again). I probably could also install "wicd" but having to ferry across files and trying to setup things without the internet is a pain.
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
I'm trying to set up a Samba printer in Debian linux. The printer is being shared by a computer running windows vista. Some of the information I've got in the process. Sharing seems to be working, the printer seems to be detected and authenticating (I've tried invalid values and the utility I'm using to set things up says it cannot verify when I use invalid values, but with things as they are it claims everything checks out).
When I go into CUPS it says it detects the printer and everything is working. However, printing a test page causes the job to be immediately complete and nothing happens. It seems that the job is getting lost somewhere in the process. Could it be a firewall issue? I feel like the right ports must be unblocked since I can query the computer and verify the printer, etc. I have a laptop with vista which I installed a printer on and was able to print to that computer just fine. So it doesn't seem to be a Vista thing.
Code: Domain=[OFFICECOMPUTER] OS=[Windows Vista (TM) Home Premium 6000] Server=[Windows Vista (TM) Home Premium 6.0] Sharename Type Comment --------- ---- ------- ADMIN$ Disk Remote Admin C$ Disk Default share D$ Disk Default share HP Deskjet D1500 series Printer HP Deskjet D1500 series IPC$ IPC Remote IPC print$ Disk Printer Drivers session request to 192.168.0.10 failed (Called name not present) session request to 192 failed (Called name not present) session request to *SMBSERVER failed (Called name not present) NetBIOS over TCP disabled -- no workgroup available
I have Ubuntu karmic as my host OS and Ubuntu Server as a guest on Virtualbox. I have set a folder on my host as shared with the guest, but how can i connect to it from the terminal on my guest? I am also using webmin as i was trying to stay away from install a desktop
I want to have a shared folder mounted on startup and I put the following in my fstab: Code: VMShare /media/VMShare vboxsf defaults,gid=1001,dmask=002 0 0 Where did 1001 corresponds to the virtual share group.
When I boot up the permissions are as follows(from ls -l): Code: drwxr-xr-x 1 root virtualshare 68 2010-10-27 15:45 VMShare/
So I'm curious why it's group permissions aren't the same as owner? In the fstab I put dmask=002 which should lead to rwxrwxr-x so basically full permissions for owner and group and read/execute for public. However thats not what I'm getting. Also once I get this working correctly am I going to have an issue if the virtualshare group isn't a users primary group? On some older unix servers I ran into this issue, hopefully it won't matter as long as the user in in the group.
just installed Debian 8.2 on my ThinkPad X230 laptop using netinst. I installed only basic system and then install packages I need manually. Now I stuck with NetworkManager and Wi-Fi. NetworkManager and its applet (package network-manager-gnome) installed, I can connect to my Wi-Fi network, but after reboot a dialog asking for passphrase for keys appeared and even after entering correct passphrase NetworkManager does not connect to the Wi-Fi, so I need to connect it manually.
I've happened across a wireless router that has a gateway address of 192.168.0.1 and allots IPs from 192.168.0.64-255. My laptop wouldn't connect to it automatically, so I was playing around and found that it needed 0.x instead of 1.x. I thought the network manager on ubuntu would have figured that out?! Now its a separate story that the router happens to have no admin password
I just installed ubuntu 9.10 in my freinds laptop and it has a realtek 81878 wireless card...it detects the wireless networks but when i connect it just keeps on asking for the authentication key again and again.
I updated successfully to 10.04 via wireless, then I downloadsynthesizer via wireless. The next day, today that is, can't get wireless to work. It keeps prompting mor the passphrase, I enter everything correctly, all the other computers in the house have no problem.
I am working with ubuntu (gnome) 10.10 maverick 64 bit on a HP pavilion 2713ca. I have installed the Broadcom sta driver for a BCM4328 wifi driver. After setting wpa security with my password, the wifi network worked for many weeks. However, in the last few days it does not connect no more. I have tried to reinstall SSID. And I have checked to see if eth1 was still there:
root@max-HP-Pavilion-dv2700-Notebook-PC:/home/max# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11abgn ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate:14 Mb/s Tx-Powerff Retry min limit:7 RTS thrff Fragment thrff Encryption keyff Power Managementff Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'm using a HP mini netbook, and I recently installed Ubuntu on it. I updated and did the whole proprietary drivers activation and it now scans and sees networks but I am having trouble actually using them now. It says that it is connected to a wireless network but it never loads any pages.
im using minimal ubuntu 10.04 and im having trouble connecting to wifi using the terminal. the wifi worked perfectly on the desktop version. i followed this guide [URL] and looks like then i used '/etc/init.d/networking restart' and get this now it seems ive disabled wlan0 as $ sudo lshw -C shows
i tried to enable it again by using 'sudo ifup wlan0' but i get a few errors i think the 2nd errors may be because i tried to download another driver for the wireless using 'wget [URL] and then 'dpkg -i rt3090-dkms_184.108.40.206-0ubuntu0~ppa1_all.deb'
I have a Skytex SX-E700 netbook with a Linux system and I cannot connect to my Time Warner home wireless system. It will connect but the IP address is invalid. Time Warner has no idea how to fix it. Has anyone had this problem and figured out how to fix it? By the way -- I can't find any system info on this little netbook and can't seen to get into anything that tells me what it contains.
After the upgrades have installed on my installation of Ubuntu 10.4 (there were some kernel upgrades, I don't remember if there was any libc update there) it asked me to do a reboot. So I did and I got that error when Ubuntu was starting:
Code: /bin/sh: error while loading shared libraries: /lib/libc.so.6: invalid ELF header Kernel panic - not syncing: Attempted to kill init! And if I run Ubuntu in recovery mode there's what I get after this: Code: Pid: 1, comm: init: Not tainted 2.6.32-22-generic #35-Ubuntu
There's also Call Trace after this, and a bit of text there, but as I'm rewriting those errors from a photo captured (because I cannot find logs of this in /var/log/) I will skip it unless it's needed to solve the problem. EDIT1: I cannot find anybody who had this problem during startup, there are only guys who had this during compiling or installing software
I first booted into Fedora and it connected to the Interneting was working brilliantly. I then booted into windows for a session of TF2. After I booted back into Fedora, it wouldn't connect to my network.I did fix this by doing a hard reset on my router, BT homehub. It's just that I don't want to reset and apply custom settings all the time.
I am a newbie trying to setup wifi using 9.10 on a compaq nx9010 . The driver is activated for the broadcom 4320 rev 2 chipset. the wifi light is on.I can connect to my neighbors's unsecured network, but not mine which is using personal WPA2 security.
I am using a lynksys Wireless-N Broadband Router WRT160Nv2 I have installed WICD and removed the gnome network manager WICD tries to validate authentication which fails. then it tries to obtain an ip address which fails. finally it says: CONNECTION FAILED: UNABLE TO GET IP ADDRESS". meanwhile it is showing the wireless network at 100% signal.
last nite tried changing wifi channel, changing to WEP, installed and tried WPASUPPLICANT and WPA_GUI. Unfortunately , nothing worked. The wifi controller was able to assosciate with the network but could not authenticate. I'm wondering if the passphrase that I type in on the computer is somehow being turned into a hexidecimal or something so that it does not match what the router has as the pass phrase.
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
I am connecting from my WinXP laptop to my Ubuntu Server desktop using PUTTY. The laptop is using Wifi and the desktop is on a wire. I have a D-Link DI-524 wireless router. My session works fine for a while, and then freezes, sometimes after only a few seconds, and sometimes after many minutes. The same thing happens when I use VMWare Server Console to connect from the laptop to the desktop's virtual machines. Other connections between these machines under this setup (RDP, samba, SVN) do not experience problems. I usually do not experience problems establishing the SSH and VMWare connections.I have ended up using Windows Remote Desktop to connect to a Windows XP virtual machine on the desktop, and opening a PUTTY session on that machine. That's a nice workaround, but it makes it so that I have to have that VM running in order to have a reliable SSH session to the box
I've noticed that switching to Ubuntu about 6 months ago has made it noticeably more difficult to use the free wifi at my school. When I had Windows 7 on the same laptop, it was much easier to establish and maintain a connection. I know it's not the hardware. My question is: is there some security setting that makes it difficult to use public wifi on Ubuntu? Also, I don't have this problem at home on my WPA2 home wifi network.
Just upgraded to Natty on both my desktop and netbook. Desktop upgrade was a breeze, and I'm liking the changes.Netbook isn't having such a good time however.First login after upgrade (using default gnome settings) played the login sound and froze. No mouse movement/keyboard response. I tried again with Ubuntu Classic - nothing. Finally Ubuntu Classic No Effects did correctly boot/login. I allowed it to perform a proper shutdown (was doing a power flip beforehand), and it was able to boot into normal Ubuntu Unity.
I enabled the wifi module using the laptop's keyboard shortcut, and Ubuntu searched for nearby networks. After finding my prefered network, it started to connect and threw the system into a command console abyss and froze. Tried again on the Ubuntu Class no effects, and it freezes on connecting to a wifi network. If the laptop crashes and I have to perform a power cycle, I can't boot into normal Ubuntu mode. I have to go back into Classic no effects.
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
Moved to virtualization forum: [URL].. I just upgraded my Ubuntu VirtualBox guest to Lucid. My host machine shares two folders with the guest. I have them listed in my /etc/fstab so they're automatically mounted:
share /mnt/share vboxsf defaults 0 0 For some reason, it looks like Ubuntu attempts to mount these shared folders twice. The first time, the mount doesn't succeed, but the second time, it does, so by the time I actually log in, the shares work properly.
Karmic would just print an error message at boot, but now Lucid makes me press a key to continue booting when the mount fails. Ideally, I'd like to figure out how to make the first mount attempt work properly. But if that's complicated, just disabling Lucid's prompt would make me happy.
moved to Fedora 11 but can't figure out how to get my wireless working. I have the broadcom driver installed and the Network Manager Applet shows the available wireless networks, but when I click on them they just don't connect.I get the following output on lspci regarding the wireless adapter:03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
I am using Ubuntu 11.04 desktop. I a, using my internet through wifi and it was working fine but suddenly it start strange activities... like when I restart ubuntu it work for few clicks but then suddenly stopp even wifi is showing connected but I cant use internet.