When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0"
Samba file server is CentOS 5.5 x86_64 named "sysimage"
dc0 Samba version is samba - 3.5.5-1.1.v5.i386
sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue: /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
I tried so to mount it locally : mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt I don't think it depends because of the permiss of the directory, and anyway it's 1777.
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
I just built an AMD Phenom II Six Core with 4 Gigs Ram a 160Gib / and swap, and (2) Two Tb mirror for Raid (data storage) I had been using DMRAID in the deprecated box but this box has MDADM v3.1.4 - 31st August 2010 from source (on MDADM wikipedia).
I have no permission problems with using the raid and dmraid is un-installed. The raid is working perfectly and is mounted in my fstab with ext4 defaults 0 2 as my options.
I have two exports /media/raid/Test /test
Both show IP and subnet on the showmount -e for the server. I can mount the test just fine on the server. I cannot, however, mount the /media/raid/Test error: mount.nfs: access denied by server while mounting hostname:/media/raid/Test Using dmraid I am able to have the deprecated box export and mount nfs shares from the raid but using MDADM on the new computer, I cannot. I get similar results with pointing MYSQL's data folder to a location on the "/media/raid/Database" (even with apparmor entries).
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.
I am trying to ssh into my server that I do have ssh installed on and have followed instructions carefully on ssh_config. My problem is that when I try to ssh from my desktop PC terminal into the server with ssh email@example.com, I get in return, firstname.lastname@example.org's password: I type in the password and I then get, Permission denied, please try again. I am putting in the correct password and am stumped......Please excuse my ignorance in this I have been using Ubuntu Desktop for 2-3 years and have been doing decent and am trying to venture out a bit.
I have tried several things to attempt to fix my sudoers file however it is still coming up with errors. The error says
the sudoers configuration file is set to the default as I have ran a dpkg on it, have also uninstalled and reinstalled it, and went over the configuration file ensuring it looked like the defaults I had seen online.
I'm running an NFS Server on my Fedora machine and trying to mount it on my OpenSuse netbook.Right now I'm getting a "permission denied error" when I try to mount NFS on my netbook. (Yesterday I could mount, but could only read not write... strange)
my Servers IP is 192.168.1.45 my Netbooks IP is 192.168.1.42 /etc/export on Server
Code: /home/bob/Music 192.168.1.42(rw,no_root_squash) /etc/hosts.allow on Server Code: sshd: 192.168.1.0/255.255.255.0
Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
I run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny - Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ****** mount error(13): Permission denied Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
I had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
I'm having a permissions problem with Ubuntu and apache. There are two users, I'll just call them A and B. All of the files belong to A and group root. I'm logged in as B and I have admin privileges. My website is working just fine but when I create a directory in the web root, change the owner to A on the directory and all files I still get a Permission Denied error when I try to access it from the web. I've also set permissions to rxwr-xr-x on the directory and all the files. So I don't understand what's going on. Why am I still getting a permission denied error?
I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:
If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:
# Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
I'm trying to create a folder using the archive manager to install Resin (web server) in the usr/local folder but I get the error message 'error creating directory: Permission denied.' Is this the easiest way to install an app--by using the Archive Manager--and if so how do I establish the correct permissions.
I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.